This paper presents an experimental investigation of laser welding low carbon galvanized steel in butt-joint configurations. The experimental work is focused on the effects of various laser welding parameters on the welds quality. The investigations are based on a structured experimental design using the Taguchi method. Welding experiments are conducted using a 3 kW Nd:YAG laser source. The selected laser welding parameters (laser power, welding speed, laser fiber diameter, gap between sheets and sheet thickness) are combined and used to evaluate the variation of four weld quality attributes (bead width, penetration depth, underfill and hardness) and to identify the possible relationship between welding parameters and weld physical and geometrical attributes. The effects of these parameters are studied using ANOVA to find their contributions to the variation of different weld characteristics. Plots of the main effects and the interaction effects are also used to understand the influence of the welding parameters. The results reveal that all welding parameters are relevant to bead width (BDW) and depth of penetration (DOP) with a relative predominance of laser power and welding speed. The effect of laser fiber diameter on penetration depth is insignificant. Typical gap-dependent weld shapes show that a small gap results in a narrower and deeper weld. Due to the standard sheared edge, an underfill between 5% and 10% occurs for no-gap experiments. The resulting hardness values are relatively similar for all the experimental tests.
References
[1]
Ribolla, A., Damoulis, G.L. and Batalha, G.F. (2005) The Use of nd:Yag Laser Weld for Large Scale Volume Assembly of Automotive Body in White. Journal of Materials Processing Technology, 164-165, 1120-1127.
https://doi.org/10.1016/j.jmatprotec.2005.02.104
[2]
Mei, L., Yan, D., Chen, G., Xie, D., Zhang, M. and Ge, X. (2015) Comparative Study on CO2 Laser Overlap Welding and Resistance Spot Welding for Automotive Body in White. Materials & Design, 78, 107-117.
https://doi.org/10.1016/j.matdes.2015.04.031
[3]
Uchihara, M. (2011) Joining Technologies for Automotive Steel Sheets. Welding International, 25, 249-259. https://doi.org/10.1080/09507111003655341
[4]
Schmidt, M., Otto, A. and Kägeler, C. (2008) Analysis of yag Laser Lap-Welding of Zinc Coated Steel Sheets. CIRP Annals-Manufacturing Technology, 57, 213-216.
https://doi.org/10.1016/j.cirp.2008.03.043
[5]
Zhao, Y., Zhang, Y., Hu, W. and Lai, X. (2012) Optimization of Laser Welding Thin-Gage Galvanized Steel via Response Surface Methodology. Optics and Lasers in Engineering, 50, 1267-1273. https://doi.org/10.1016/j.optlaseng.2012.03.010
[6]
Amo, J.M., Durán, J., Chao, J. and Fernández-Sáez, J. (1996) Laser Welding of Al55-Zn Coated Steel Sheet. Journal of Materials Science, 31, 6595-6607.
https://doi.org/10.1007/BF00356267
[7]
Spöttl, M. and Mohrbacher, H. (2014) Laser-Based Manufacturing Concepts for Efficient Production of Tailor Welded Sheet Metals. Advances in Manufacturing, 2, 193-202. https://doi.org/10.1007/s40436-014-0088-8
[8]
Sun, Z. and Kuo, M. (1999) Bridging the Joint Gap with Wire Feed Laser Welding. Journal of Materials Processing Technology, 87, 213-222.
https://doi.org/10.1016/S0924-0136(98)00346-X
[9]
Jeng, J.-Y., Mau, T.-F. and Leu, S.-M. (2000) Prediction of Laser Butt Joint Welding Parameters Using Back Propagation and Learning Vector Quantization Networks. Journal of Materials Processing Technology, 99, 207-218.
https://doi.org/10.1016/S0924-0136(99)00424-0
[10]
Sokolov, M. and Salminen, A. (2012) Experimental Investigation of the Influence of Edge Morphology in High Power Fiber Laser Welding. Physics Procedia, 39, 33-42.
https://doi.org/10.1016/j.phpro.2012.10.011
[11]
Suh, J., Kim, T., Yu, B. and Lee, K. (1998) A Study of Tailored Blank Welding between Mild Steel Sheet and Zn-Coated Steel Sheet by CO2 Laser Beam. Metals and Materials, 4, 157-163. https://doi.org/10.1007/BF03026033
[12]
Park, J. and Kim, T. (1999) Tailored Blank Welding between Low Carbon Steel Sheet and STS 304 Stainless Steel Sheet by CO2 Laser Beam. Metals and Materials, 5, 55-62. https://doi.org/10.1007/BF03026005
[13]
America, L.I., Ready, J.F. and Farson, D.F. (2001) Lia Handbook of Laser Materials Processing. Laser Institute of America, Magnolia Publishing, Orlando.
[14]
Ross, P.J. (1996) Taguchi Techniques for Quality Engineering: Loss Function, Orthogonal Experiments, Parameter and Tolerance Design. McGraw-Hill, New York.
[15]
Khan, M.M.A., Romoli, L., Fiaschi, M., Sarri, F. and Dini, G. (2010) Experimental Investigation on Laser Beam Welding of Martensitic Stainless Steels in a Constrained Overlap Joint Configuration. Journal of Materials Processing Technology, 210, 1340-1353. https://doi.org/10.1016/j.jmatprotec.2010.03.024
[16]
Assuncao, E., Williams, S. and Yapp, D. (2012) Interaction Time and Beam Diameter Effects on the Conduction Mode Limit. Optics and Lasers in Engineering, 50, 823-828. https://doi.org/10.1016/j.optlaseng.2012.02.001
[17]
Assuncao, E. and Williams, S. (2013) Comparison of Continuous Wave and Pulsed Wave Laser Welding Effects. Optics and Lasers in Engineering, 51, 674-680.
https://doi.org/10.1016/j.optlaseng.2013.01.007
[18]
Steen, W.M. and Mazumder, J. (2010) Laser Material Processing. Springer, London.
https://doi.org/10.1007/978-1-84996-062-5
