NABARRO F R N.Two-phase materials for high-temperature service[J].Intermetallics,2000,8:979-985.
[4]
TOSHIMITSU T.Development of a TiAl turbocharger for passenger vehicles[J].Materials Science and Engineering,2002,A329-331:582-588.
[5]
KIM Y W,DIMIDUK D M.Progress in the understanding of gamma titanium aluminides[J].JOM,1991,8:40-47.
[6]
SZEWCZAK E,PASZULA J,LEONOV A V,et al.Explosive consolidation of mechanically alloyed Ti-Al alloys[J].Mater Science and Engineering,1997,A226-228:115-118.
[7]
FORES F H,SENKOV O N,BABURAJ E G.Synthesis of nanocrystalline materials-an overview[J].Mater Science and Engineering,2001,A301:44-53.
[8]
CLEMENS H,KESTLER H.Processing and applications of intermetallic TiAl-based alloys[J].Advanced Engineering and Materials,2000,2:551-560.
[9]
CLEMENS H.Intermetallic γ-TiAl based alloy sheet materials-processing and mechanical properties[J].Z Metallkd,1995,86:814-822.
[10]
SEMIATIN S L,SEETHARAMAN V.Deformation and microstructure development during hot-pack rolling of a near-gamma titanium aluminide alloy[J].Metall and Mater Trans,1995,A 26:371-381.
[11]
KIM Y W,ROSENBERGER A,DIMIDUK D M.Microstructural changes and estimated strengthening contributions in a gamma alloy Ti-45Al-5Nb pack-rolled sheet[J].Intermetallics,2009,17:1017-1027.
[12]
SEMIATIN S L,VOLLMER D C,EL-SOUDANI S M,et al.Understanding the failure of near gamma titanium aluminides during rolling[J].Scr Metall,1990,24:1409-1413.
[13]
SEMIATIN S L,OHLS M,KERR W R.Temperature transients during hot pack rolling of high temperature alloys[J].Scr Metall,1991,25:1851-1856.
[14]
SEMIATIN S L,SEETHARAMAN V.Load-signature analysis for pack rolling of near gamma titanium aluminide alloys[J].Metall Trans,1994,A25:2539-2542.
[15]
IMAYEV V M,IMAYEV R M,KUZNETSOV A V.Development of novel sheet rolling process of ingot-metallurgy γ-TiAl+α2Ti3Al based alloys for production of sheets with enhanced mechanical properties[A].Ti-2003 Science and Technology[C].Darmstadt,Germany:WILEY-VCH Verlag GmbH & Co.KGaA,2003.2257-2264.
SENKOV O N,CAVUSOGLU M,FORES F H.Synthesis and characterization of a TiAl/Ti5Si3 composite with a submicrocrystalline structure[J].Mater Science and Engineering,2001,A300:85-93.
[24]
SENKOV O N,UCHIC M D,MENON S,et al.Crystallization kinetics of an amorphous TiAl sheet produced by PVD[J].Scripta Materialia,2002,46:187-192.
[25]
KOEPPE C,BARTELS A,CLEMENS H,et al.Optimizing the properties of TiAl sheet material for application in heat protection shields or propulsion systems[J].Materials Science and Engineering,1995,A201:182-193.
[26]
BARTELS A,KESTLER H,CLEMENS H.Deformation behavior of differently processed γ-titanium aluminides[J].Materials Science and Engineering,2002,A329-331:153-162.
LUO J G,ACOFF L V.Processing gamma-based TiAl sheet materials by cyclic cold roll bonding and annealing of elemental titanium and aluminum foils[J].Materials Science and Engineering,2006,A433:334-342.
[31]
J OH I,PYO S G,LEE S,et al.Fabrication of multilayered titanium aluminide sheets by self-propagating high-temperature synthesis reaction using hot rolling and heat treatment[J].Journal of Materials Science,2003,38:3647-3651.
[32]
GERLING R,BARTELS A,CLEMENS H,et al.Structural characterization and tensile properties of a high niobium containing gamma TiAl sheet[J].Intermetallics,2004,3:275-280.
[33]
WANG G,DAHMS M,LEITNER G,et al.Titanium aluminides from cold-extruded elemental powders with Al-contents of 25-75at%Al[J].Journal of Materials Science,1994,29:1847-1853.
[34]
DAVID E A,JEFFREY A H,ARTHUR V P,et al.Processing intermetallic composites by self propagating,high-temperature synthesis[J].JOM,1994,46:31-35.
CLEMENS H,APPEL F,BARTELS A,et al.Processing and application of engineering γ-TiAl based alloys[A].Ti-2003 Science and Technology[C].Darmstadt,Germany:WILEY-VCH Verlag GmbH & Co.KGaA,2003.2123-2136.
[37]
ADAMS A G,RAHAMAN M N,DUTTON R E.Microstructure of dense thin sheets of γ-TiAl fabricated by hot isostatic pressing of tape-cast monotapes[J].Materials Science and Engineering,2008,A477:137-144.
[38]
SENKOV O N,UCHIC M D.Microstructure evolution during annealing of an amorphous TiAl sheet[J].Materials Science and Engineering,2003,A340:216-224.
HAN J C,ZHANG D M,CHEN G Q,et al.Microstructure and properties of electron beam-physical vapor deposited TiAl sheet and TiAl and Nb laminated composites[J].Transactions of Nonferrous Metals Society of China (English Edition),2006,16:s449-s452.
