KUBOTA K,MABUCHI M,HIGASHI K.Processing and mechanical properties of fine-grained magnesium alloys[J].Journal of Material Science,1999,34(10):2255-2262.
[2]
VISWANATHAN V,LAHA T,BALANI K,et al.Challenges and advances in nanocomposite processing techniques[J].Materials Science and Engineering,2006,R54(5-6):121-285.
[3]
WATANABE H,MABUCHI M,HIGASHII K,et al.High-strain-rate superplasticity at low temperature in a ZK61. magnesium alloy produced by powder metallurgy[J].Scripta Materialia,1999,41(2):209-213.
[4]
GUO X F,SHECHTMAN D.Reciprocating extrusion of rapidly solidified Mg-6Zn-1Y-0.6Ce-0.6Zr alloy[J].Journal of Materials Processing Technology,2007,187-188:640-644.
NISHIDA M,KAWAMURA Y,YAMAMURO T.Formation process of unique microstructure in rapidly solidified Mg97Zn1Y2 alloy[J].Materials Science and Engineering,2004,A375-377:1217-1223.
[7]
SRIVATSAN T S,VASUDEVAN S,PETRAROLI M.The tensile deformation and fracture behavior of a magnesium alloy[J].Journal of Alloys and Compounds,2008,461(1-2):154-159.
[8]
MORA E,GARCES G,ONORBE E,et al.High-strength Mg-Zn-Y alloys produced by powder metallurgy[J].Scripta Materialia,2009,60(9):776-779.
[9]
MAENG D Y,KIM T S,LEE J H,et al.Microstructure and strength of rapidly solidified and extruded Mg-Zn alloys[J].Scripta Materialia,2000,43(5):385-389.
[10]
KUMAR S.Some studies on hot extrusion of rapidly solidified Mg alloys[J].Journal of Materials Engineering and Performance,2006,15(1):41-46.
[11]
SUGAMATA M,HANAWA S,KANEKO J.Structures and mechanical properties of rapidly solidified Mg-Y based alloys[J].Materials Science and Engineering,1997,A226-228:861-866.
[12]
SOMEKAWA H,SINGH A,MUKAI T.Microstructure evolution of Mg-Zn binary alloy during a direct extrusion process[J].Scripta Materialia,2008,60(6):411-414.
[13]
SHAHZAD M,WAGNER L.Microstructure development during extrusion in a wrought Mg-Zn-Zr alloy[J].Scripta Materialia,2009,60:536-538.
[14]
李月珠.快速凝固技术和材料[M].北京:国防工业出版社,1993.8-11.
[15]
INOUE T,TORIZUKA S,NAGAI K.Effect of shear deformation on refinement of crystal grains[J].Materials Science and Technology,2002,18:1007-1015.
SOMEKAWA H,SINGH A,MUKAI T.Effect of precipitate shapes on fracture toughness in extruded Mg-Zn-Zr magnesium alloys[J].Journal of Materials Research,2007,22(4):965-973.
[18]
陈振华,严红革,陈吉华,等.镁合金[M].北京:化学工业出版社,2004.33-34.
[19]
MORDIKE B L,EBERT T.Magnesium:properties-applications-potential[J].Materials Science and Engineering,2001,A302(1):37-45.
[20]
BUHA J.Grain refinement and improved age hardening of Mg-Zn alloy by a trace amount of V[J].Acta Materialia,2008,56(14):3533-3542.
[21]
DING W J,LI D Q,WANG Q D,et al.Microstructure and mechanical properties of hot-rolled Mg-Zn-Nd-Zr alloys[J].Materials Science and Engineering,2008,A483-484:228-230.
[22]
WONG W L E,GUPTA M.Development of Mg/Cu nanocomposites using microwave assisted rapid sintering[J].Composites Science and Technology,2007,67(7-8):1541-1552.
[23]
HE S M,PENG L M,ZENG X Q,et al.Comparison of the microstructure and mechanical properties of a ZK60 alloy with and without 1.3wt.% gadolinium addition[J].Materials Science and Engineering,2006,A433(1-2):175-181.
[24]
NAKASHIMA K,IWASAKI H,MORI T,et al.Mechanical properties of a powder metallurgically processed Mg-5Y-6Re alloy[J].Materials Science and Engineering,2000,A293(1-2):15-18.
