WU X W,CHANDEL R S.Induction brazing of Inconel 718 to Inconel X-750 using Ni-Cr-Si-B amorphous foil[J].Journal of Materials Processing Technology,2000,104(1):34-43.
[4]
李文.DD98镍基单晶高温合金的瞬态液相连接[D].中国科学院金属研究所博士论文.2002.
[5]
LI X H,MAO W,CHENG Y Y.Microstructures and properties of transient liquid phase diffusion bonded joints of Ni3Al-base superalloy[J].Transactions of Nonferrous Metals Society of China,2001,11(3):405-408.
[6]
郑运荣,张德堂.高温合金与钢的彩色金相研究[M].北京:国防工业出版社,1999.
[7]
HECK K A,SMITH D F,HOLDERBY M A,et al.Three phase controlled expansion superalloys with oxidation resistance[A].Superalloys 1992[C].PA:The Seven Springs International Symposium Committee,1992.217-226.
[8]
SMITH J S,HECK K A.Development of a low thermal expansion,crack growth resistant superalloy[A].Superalloys 1996[C].PA:The Seven Springs International Symposium Committee,1996.91-100.
[9]
HECK K A,SMITH J S,SMITH R.Inconel alloy 783:an oxidation-resistant,low expansion superalloy for gas turbine applications[J].Journal of Engineering for Gas Turbines and Power,1998,120(2):363-369.
[10]
MA L Z,CHANG K M,MANNAN S K,et al.Effects of NiAl-βprecipitates on fatigue crack propagation of Inconelalloy 783 under time-dependent condition with vallous load ratios[J].Scripta materialia,2003,48(5):551-557.
[11]
MA L Z,CHANG K M.Identification of SAGBO-induced damage zone ahead of crack tip to characterize sustained loading crack growth in alloy 783[J].Scripta materialia,2003,48(5):1271-1276.
[12]
MA L Z,CHANG K M,MANNAN S K.Effect of thermomechaincal processing on fatigue crack propagation in inconel alloy 783[A].SUPERALLOYS 2000[C].PA:The Seven Springs International Symposium Committee,2000.601-608.
