牟仁德,陆峰,何利民,等. 热障涂层技术在航空发动机上的应用与发展[J].热喷涂技术,2009,1(1):53-58.MU Ren-de,LU Feng,HE Li-min,et al. Application and development of thermal barrier coatings on aero engines[J].Thermal Spray Technology,2009,1(1):53-58.
[2]
黄光宏,王宁,何利民,等.环境障涂层研究进展[J].失效分析与预防,2007,2(1):59-64.HUANG Guang-hong,WANG Ning,HE Li-min,et al. Research progress on environment barrier coating[J]. Failure Analysis and Prevention,2007,2(1):59-64.
[3]
牟仁德,贺世美,何利民.微叠层结构EB-PVD热障涂层[J].航空材料学报,2009,29(3):55-60.MU Ren-de,HE Shi-mei,HE Li-min. EB-PVD thermal barrier coatings with micro laminated structure[J].Journal of Aeronautical Materials,2009,29(3):55-60.
[4]
SUSAN D F, MARDERA A R.Ni-Al composite coatings: diffusion analysis and coating lifetime estimation[J].Acta Materialia,2001,49(7):1153-1163.
[5]
潘金生,田民波.材料科学基础[M].北京:清华大学出版社,1998.
[6]
徐滨士.表面工程与维修[M].北京:机械工业出版社,1996.85-87.
[7]
徐惠彬,宫声凯,刘福顺.航空发动机热障涂层材料体系的研究[J].航空学报,2000,21(1):7-12.XU Hui-bin,GONG Sheng-kai,LIU Fu-shun. Recent development in materials design of thermal barrier coatings for gas turbine[J]. Acta Aeronautica Et Astronautica Sinica,2000,21(1):7-12.
[8]
KARUNARTNE M S A, RAE C M F, REED R C. On the microstructural instability of an experimental nickel base single crystal superalloy[J]. Metallurgical and Materials Transactions A, 2001,32(10):2409-2421.
[9]
RAE C M F, REED R C. The precipitation of topologically close-packed phase in rheninm-containing superalloys[J]. Acta Materialia,2001,49(19):4113-4125.
[10]
熊玉明,李明升,李松林. 热障涂层与镍基高温合金界面的互扩散行为[J].粉末冶金材料科学与工程,2007,7(4):63-69. XIONG Yu-ming,LI Ming-sheng,LI Song-lin. Interdiffusion behaviors of interface between thermal barrier coating and Ni superalloy at high temperatures[J]. Materials Science and Engineering of Powder Metallurgy,2007,7(4):63-69.
[11]
陈和兴.镍基合金基体热障涂层界面扩散和反应的研究.长沙:中南大学,2004.
[12]
CZECH N, SCHMITZ F, SRAMM W. Microstructural analysis of the role of rhenium in a advanced MCrAlY coatings[J]. Surface and Coatings Technology,1995,76-77(1):28-33.
[13]
BEELE W, CZECH N, QUADAKKERS W J, et al. Long-term oxidation tests on a Re-containing MCrAlY coatings[J]. Surface and Coatings Technology,1997,94-95:41-45.
[14]
NARITA T, YOSHIDA D. Heat-resistant nickel-alloy composite excellent in high temperature oxidation resistance.USA Patent:7285337,2007-10-23.
[15]
XU C Z, JIANG S M, BAO Z B, et al. Isothermal oxidation behavior of a gradient NiCoCrAlSiY coating deposited by arc ion plating on a Ni-based single crystal superalloy[J]. Corrosion Science,2009,51(6):1467-1474.
[16]
NYSTROM J D, POLLOCK T M, MURPHY W H, et al. Discontinuous cellular precipitation in a high refractory nickel base superalloy[J]. Metallurgical and Materials Transactions A, 1997,28(12):2443-2452.
[17]
SUZUKI A S, KAWAGISHI K, YOKOKAWA T,et al.Effect of Cr on microstructural evolution of aluminized fourth generation Ni-base single crystal superalloys[J].Surface & Coatings Technology,2012,206(11-12):2769-2773.
[18]
田贺,牟仁德,何利民,等.黏结层成分对单晶高温合金热障涂层寿命影响研究[J].失效分析与预防,2012,7(4):228-234. TIAN He,MU Ren-de,HE Li-min,et al. Influence of bond coating composition on thermal barrier coating life for single crystal superalloy[J].Failure Analysis and Prevention,2012,7(4):228-234.
[19]
CHEN Xiao-qun.Progressive damage and failure of thermal barrier coatings.Detroit:Wayne State University,2001.
[20]
MüLLER J,NEUSCHüTZ D.Efficiency of α-alumina as diffusion barrier between bond coat and bulk material of gas turbine blades [J].Vacuum,2003,71(1-2):247-251.
[21]
STOTT F H,SHIDA Y,WHITTLE D P, et a1.Development of preferential integranular oxides in nickel-aluminum alloys at high temperatures[J].Oxidation of Metals,1982,18(3):127-135.