DONG W, WANG Q, PENG X, et al. Removal of phosphorus in metallurgical grade silicon using electron beam melting[J]. Materials Science Forum,2011,675-577:45-48.
[2]
WANG Q, DONG W, TAN Y, et al. Impurities evaporation from metallurgical-grad silicon in electron beam melting process[J]. Rare Metals,2011,30(3):274-277.
[3]
姜大川, 谭毅, 董伟, 等. 电子束束流密度对冶金硅中杂质磷的影响[J]. 材料工程,2010,(3):18-21. JIANG D C, TAN Y, DONG W, et al. Effect of beam density of electron beam on phosphorus impurity in metallurgical grade silicon[J]. Journal of Materials Engineering,2010,(3):18-21.
[4]
姜大川, 董伟, 谭毅, 等. 电子束熔炼多晶硅对杂质铝去除机制研究[J]. 材料工程,2010,(8):8-11. JIANG D C, DONG W, TAN Y, et al. Investigation on removal of aluminum impurity in metallurgical grade silicon by electron beam melting[J]. Journal of Materials Engineering,2010,(8):8-11.
[5]
彭旭, 董伟, 谭毅, 等. 电子束熔炼冶金级硅中杂质钙的蒸发行为[J]. 功能材料,2010,41(S1):117-120. PENG X, DONG W, TAN Y, et al. Evaporation behavior of calcium in metallurgical silicon by an electron beam melting method[J]. Journal of Functional Materials,2010,41(S1):117-120.
[6]
王强, 董伟, 谭毅, 等. 电子束熔炼去除冶金级硅中磷、铝、钙的研究[J]. 功能材料,2010,41(S1):144-147. WANG Q, DONG W, TAN Y, et al. Investigation on the removal of phosphorus,aluminum,calcium from metallurgical grade silicon using electron beam melting[J]. Journal of Functional Materials,2010,41(S1):144-147.
[7]
DONG W, PENG X, JIANG D C, et al. Calcium evaporation from metallurgical grade silicon by an electron beam melting[J]. Materials Science Forum,2011,675-577:41-44.
[8]
PENG X, DONG W, TAN Y, et al. Removal of aluminum from metallurgical grade silicon using electron beam melting[J]. Vacuum,2011,86(4):471-475.
[9]
ZHANG Y M, ZHOU L, SUN J, et al. An investigation on electron beam cold hearth melting of Ti64 alloy[J]. Rare Metal Materials and Engineering,2008,37(11):1973-1977.
[10]
WATAKABE S, SUZUKI K, NISHIKAWA K. Control of chemical compositions of Ti-6Al-4V alloy during melting by electron beam furnace[J]. ISIJ International,1992,32(5):625-629.
[11]
IVANCHENKO V G, IVASISHIN O M, SEMIATIN S L. Evaluation of evaporation losses during electron-beam melting of Ti-Al-V alloys[J]. Metallurgical and Materials Transactions B,2003,34(6):911-915.
[12]
NAKAMURA H, MITCHELL A. The effect of beam oscillation rate on Al evaporation from a Ti-6Al-4V alloy in the electron beam melting process[J]. ISIJ International,1992,32(5):583-592.
[13]
POWELL A, VAN DEN AVYLE J, DAMKROGER B, et al. Analysis of multicomponent evaporation in electron beam melting and refining of titanium alloys[J]. Metallurgical and Materials Transactions B,1997,28(6):1227-1239.
[14]
BELLOT J P, HESS E, ABLITZER D. Aluminum volatilization and inclusion removal in the electron beam cold hearth melting of Ti alloys[J]. Metallurgical and Materials Transactions B,2000,31(4):845-854.
[15]
ZHUK H V, KOBRYN P A, SEMIATIN S L. Influence of heating and solidification conditions on the structure and surface quality of electron-beam melted Ti-6Al-4V ingots[J]. Journal of Materials Processing Technology,2007,190(1-3):387-392.
[16]
胡忠武, 李中奎, 张小明. 钽及钽合金的工业应用和进展[J]. 稀有金属快报,2004,23(7):8-10. HU Z W, LI Z K, ZHANG X M. Industrial application and progress of tantalum and tantalum alloys[J]. Rare Metals Letters,2004,23(7):8-10.
[17]
阎洪. 真空扫描电子束提纯新技术[J]. 真空,2000,(3):45-47. YAN H. New technology of vacuum electron beam to refine metal[J]. Vacuum,2000,(3):45-47.
[18]
CHOI G S, LIM J W, MUNIRATHNAM N R, et al. Preparation of 5N grade tantalum by electron beam melting[J]. Journal of Alloys and Compounds,2009,469(1-2):298-303.
[19]
VUTOVA K, VASSILEVA V, KOLEVA E, et al. Investigation of electron beam melting and refining of titanium and tantalum scrap[J]. Journal of Materials Processing Technology,2010,210(8):1089-1094.
[20]
石应江. 高纯铌的制备[J]. 稀有金属与硬质合金,1995,(1):41-48. SHI Y J. Preparation of high-purity niobium[J]. Rare Metals And Cemented Carbides,1995,(1):41-48.
李正邦. 超洁净钢的新进展[J]. 材料与冶金学报,2002,(3):161-165. LI Z B. New progress of super clean steel[J]. Journal of Materials and Metallurgy,2002,(3):161-165.
[26]
NAKAO R, FUKUMOTO S, MURATA W, et al. Removal of inclusions in stainless steel by electron beam melting[J]. ISIJ International,1992,32(5):693-699.
[27]
NAKAO R, FUKUMOTO S, FUJI M, et al. Evaporation of alloying elements and behavior of degassing reactions of high chromium steel in electron beam melting[J]. ISIJ International,1992,32(5):685-692.
[28]
MAIJER D M, IKEDA T, COCKCROFT S L, et al. Mathematical modeling of residual stress formation in electron beam remelting and refining of scrap silicon for the production of solar-grade silicon[J]. Materials Science and Engineering A,2005,390(1-2):188-201.
[29]
王步根, 黄以平. 电子束熔炼多晶硅温度场的数值模拟[J]. 能源技术,2009,30(6):328-330. WANG B G, HUANG Y P. Numerical simulation for temperature field of electron beam melting polysilicon[J]. Energy Technology,2009,30(6):328-330.
[30]
罗雷, 毛小南, 雷文光, 等. 电子束冷床熔炼TC4合金温度场模拟[J]. 中国有色金属学报,2010,(S1):404-409. LUO L, MAO X N, LEI W G, et al. Temperature field simulation of electron beam cold hearth melting TC4 alloy[J]. The Chinese Journal of Nonferrous Metals,2010,(S1):404-409.
[31]
雷文光, 于兰兰, 毛小南. 电子束冷床熔炼TC4钛合金连铸凝固过程数值模拟[J]. 中国有色金属学报,2010,(S1):381-386. LEI W G, YU L L, MAO X N. Numerical simulation of continuous casting solidification process of TC4 titanium alloy during EBCHM[J]. The Chinese Journal of Nonferrous Metals,2010,(S1):381-386.
[32]
RITCHIE M, LEE P D, MITCHELL A, et al. X-ray-based measurement of composition during electron beam melting of AISI 316 stainless steel: part II. evaporative processes and simulation[J]. Metallurgical and Materials Transactions A,2003,34(3):863-877.
[33]
张以忱. 电子枪与离子束技术[M]. 北京:冶金工业出版社,2004.32.
[34]
BAKISH R. The substance of a technology: electron-beam melting and refining[J]. JOM,1998,50(11):28-30.
[35]
SCHILLER S, HEISIG U, PANZER S. Electron Beam Technology[M]. New York:John Wiley & Sons Inc,1983.255.
[36]
张文林, 孙涛, 李娟莹. 电子束熔炼及其设备[J]. 冶金设备,2003,(4):32-34.ZHANG W L, SUN T, LI J Y. The smelting of electron beam and the smelting equipment[J]. Metallurgical Equipment,2003,(4):32-34.
[37]
刘春东, 张东辉, 马轶群, 等. 电子束熔炼技术及发展趋势浅析[J]. 河北建筑工程学院学报,2008,26(4):67-68.LIU C D, ZHANF D H, MA Y Q, et al. Analysis of the electron beam smelting technology and developing trend[J]. Journal of Hebei Institute of Architecture and Civil Engineering,2008,26(4):67-68.
[38]
马立蒲, 刘为超. 电子束熔炼技术及其应用[J]. 有色金属加工,2008,37(6):28-31.MA L P, LIU W C. Electron beam melting technology and its application[J]. Nonferrous Metals Processing,2008,37(6):28-31.
[39]
CHOUDHURY A, HENGSBERGER E. Electron beam melting and refining of metals and alloys[J]. ISIJ International,1992,32(5):673-681.
[40]
YUGE N, ABE M, HANAZAWA K, et al. Purification of metallurgical-grade silicon up to solar grade[J]. Progress in Photovoltaics,2001,9(3):203-209.
[41]
吕东, 马文会, 伍继君, 等. 冶金法制备太阳能级多晶硅新工艺原理及研究进展[J]. 材料导报,2009,23(3):30-33.LV D, MA W H, WU J J, et al. New process principle and research advances of production of solar grade poly silicon by metallurgical method[J]. Materials Review,2009,23(3):30-33.
[42]
郑淞生, 陈朝, 罗学涛. 多晶硅冶金法除磷的研究进展[J]. 材料导报,2009,23(10):11-19. ZHENG S S, CHEN C, LUO X T. Research progress in phosphorus removal by metallurgical refining[J]. Materials Review,2009,23(10):11-19.
[43]
黄莹莹, 郭辉, 黄建明, 等. 精炼法提纯冶金硅至太阳能级硅的研究进展[J]. 功能材料,2007,38(9):1397-1399. HUANG Y Y, GUO H, HUANG J M, et al. Advances in research on upgrading of solar grade(SoG) silicon by refining metallurgical grade(MG) silicon[J]. Journal of Functional Materials,2007,38(9):1397-1399.
[44]
IKEDA T, MAEDA M. Purification of metallurgical silicon for solar-grade silicon by electron beam button melting[J]. ISIJ International,1992,32(5):635-642.
[45]
PIRES J C S, BRAGA A F B, MEI P R. Profile of impurities in polycrystalline silicon samples purified in an electron beam melting furnace[J]. Solar Energy Materials & Solar Cells,2003,79(3):347-355.
[46]
PIRES J C S, OTUBO J, BRAGA A F B, et al. The purification of metallurgical grade silicon by electron beam melting[J]. Journal of Materials Processing Technology,2005,169(1):16-20.
[47]
MIYAKE M, HIRAMATSU T, MAEDA M. Removal of phosphorus and antimony in silicon by electron beam melting at low vacuum[J]. Journal of the Japan Institute of Metals,2006,70(1):43-46.
[48]
OSOKIN V A, SHPAK P A, ISHCHENKO V V. Electron-beam technology for refining polycrystalline silicon to be used in solar power applications[J]. Metallurgist,2008,52(1-2):121-127.
[49]
LUO D W, LIU N, LU Y P, et al. Removal of impurities from metallurgical grade silicon by electron beam melting[J]. Journal of Semiconductors,2011,32(3):033003.
[50]
徐云飞, 谭毅, 姜大川, 等. 冶金法制备多晶Si杂质去除效果研究[J]. 特种铸造及有色合金,2007,27(9):730-732. XU Y F, TAN Y, JIANG D C, et al. Inclusion removal in multi-crystal silicon fabricated by metallurgical method[J]. Special Casting & Nonferrous Alloys,2007,27(9):730-732.
[51]
董伟, 王强, 彭旭, 等. 电子束熔炼冶金级硅除铝研究[J]. 材料研究学报,2010,24(6):592-596. DONG W, WANG Q, PENG X, et al. Aluminum evaporation from metallurgical silicon in electron beam melting process[J]. Chinese Journal of Materials Research,2010,24(6):592-596.
[52]
HANAZAWA K, YUGE N, KATO Y. Evaporation of phosphorus in molten silicon by an electron beam irradiation method[J]. Materials Transactions,2004,45(3):844-849.
[53]
张英明, 周廉, 孙军, 等. 钛合金电子束冷床熔炼研究进展[J]. 钛工业进展,2008,25(4):14-19. ZHANG Y M, ZHOU L, SUN J, et al. Research development of electron beam cold hearth remelting of Ti alloys[J]. Titanium Industry Progress, 2008,25(4):14-19.
[54]
LANDIG T, MCKOON R, YOUNG M. Electron-beam melting of Ti-6Al-4V[J]. Journal of Vacuum Science & Technology,1977,14(3):808-814.
[55]
陈峰, 陈丽, 国斌, 等. 电子束冷床熔炼的优与劣[J]. 中国有色金属学报,2010,20(S1):873-876. CHEN F, CHEN L, GUO B, et al. Advantages and disadvantages of electron beam cold hearth melting[J]. The Chinese Journal of Nonferrous Metals,2010,20(S1):873-876.
[56]
罗雷, 于兰兰, 雷文光, 等.电子束冷床熔炼TC4合金元素挥发机制研究[J]. 稀有金属材料与工程,2011,40(4):625-629. LUO L, YU L L, LEI W G, et al. Research on evaporation mechanism of elements in TC4 alloys during electron beam cold hearth melting[J]. Rare Metal Materials and Engineering,2011,40(4):625-629.
[57]
韩明臣, 张英明, 周义刚, 等. TC4合金电子束冷床熔炼过程中LDI和HDI的去除[J]. 稀有金属材料与工程,2008,37(4):665-669. HAN M C, ZHANG Y M, ZHOU Y G, et al. Elimination of LDI and HDI in TC4 alloy during electron beam cold hearth melting[J]. Rare Metal Materials and Engineering,2008,37(4):665-669.
[58]
MITCHELL A. The electron beam melting and refining of titanium alloys[J]. Materials Science and Engineering:A,1999,263(2):217-223.
[59]
ISAWA T, NAKAMURA H, MURAKAMI K. Aluminum evaporation from titanium alloys in EB hearth melting process[J]. ISIJ International,1992,32(5):607-615.
[60]
AKHONIN S V, TRIGUB N P, ZAMKOV V N, et al. Mathematical modeling of aluminum evaporation during electron-beam cold-hearth melting of Ti-6Al-4V ingots[J]. Metallurgical and Materials Transactions B,2003,34(4):447-454.
[61]
SEMIATIN S L, IVANCHENKO V G, AKHONIN S V, et al. Diffusion models for evaporation losses during electron-beam melting of alpha/beta-titanium alloys[J]. Metallurgical and Materials Transactions B,2003,35(2):235-245.
[62]
ONO K, HWAN K Y. Electron beam melting and refining of niobium[J]. ISIJ International,1992,32(5):650-655.
[63]
FUKUMOTO S, NAKAO R, FUJI M, et al. Composition control of refractory and reactive metals in electron beam melting[J]. ISIJ International,1992,32(5):664-672.
[64]
CHOI G S, LIM J W, MUNIRATHNAM N R, et al. Purification of niobium by multiple electron beam melting for superconducting RF cavitie[J]. Metals and Materials International,2009,15(3):385-390.
[65]
朱利安, 杨盛良, 白书欣, 等. 铱及其合金的加工及应用[J]. 贵金属,2009,30(4):58-62. ZHU L A, YANG S L, BAI S X, et al. Processing and application of iridium and Ir-alloys[J]. Precious Metals,2009,30(4):58-62.
[66]
OHRINER E K. Purification of iridium by electron beam melting[J]. Journal of Alloys and Compounds,2008,461(1-2):633-640.
[67]
钟培全. 钼与钼合金的应用及其加工方法[J]. 中国钼业,2000,24(5):15-16. ZHONG P Q. Application of molybdenum and molybdenum alloys and their working method[J]. China Molybdenum Industry,2000,24(5):15-16.
[68]
JIANG D C, TAN Y, SHI S, et al. Research on a new method of electron beam candle melting used for the removal of P from molten Si[J]. Materials Research Innovations,2011,15(6):406-409.
