BALLONI L, SPIGARELLI S, EVANGELISTA E, et al. Hot work ability and constitutive equations of ZM21 magnesium alloy[J]. Key Engineering Materials, 2008, 367: 79-86.
[2]
SWIOSTEK J, LETZING D, KAINER K U. Hydrostatic extrusion at 100℃ and its effect on the grain size and mechanical properties of magnesium alloys[J]. Metal Science and Heat Treatment, 2006, 48(11-12): 499-503.
[3]
DALE L, MATTHEW R B. Extrusion limits of magnesium alloys[J]. Metallurgical and Materials Transactions A, 2007, 38(12): 3032-3041.
[4]
黎文献.镁及镁合金[M].长沙:中南大学出版社,2005.
[5]
曾小勤, 丁文江, 姚正裔,等. Mg-Zn-Al系合金组织和力学性能[J].上海交通大学学报, 2005, 39(1):46-51.ZENG X Q, DING W J, YAO Z Y, et al. The microstructure and mechanical properties of Mg-Zn-Al alloys[J]. Journal of Shanghai Jiaotong University, 2005, 39 (1): 46-51.
[6]
宋成猛,彭建,刘天模. AZ10镁合金均匀化退火工艺研究[J].材料导报,2007,21(5A):382-384.SONG C M, PENG J, LIU T M. Investigation on homogenizing of AZ10 magnesium alloy ingot[J]. Materials Review, 2007,21(5A):382-384.
[7]
谢建新,刘静安.金属挤压理论与技术[M].北京:冶金工业出版社,2001.1-7.
[8]
彭建,王中国,刘虹,等.退火工艺对AZ61镁合金铸坯组织及加工性能的影响[J].材料导报,2007,21(5A): 378-379. PENG J, WANG Z G, LIU H, et al. Effects of annealing process on microstructure and mechanical properties of AZ61 magnesium alloy ingot[J]. Materials Review, 2007,21(5A):378-379.
[9]
钟皓,陈琪,闫蕴琪,等.AZ31镁合金的热挤压组织与力学性能分析[J].轻金属, 2007, (3): 52-55. ZHONG H,CHEN Q,YAN Y Q,et al. Analysis of microstructures and mechanical properties of hot extruded AZ31 magnesium alloy[J]. Light Metals, 2007, (3): 52-55.
[10]
徐春杰,张忠明,郭学锋,等.热挤压AZ91D镁合金的组织与力学性能[J].西安理工大学学报,2005,21(4): 356-360. XU C J,ZHANG Z M,GUO X F,et al. Microstructure and mechanical properties of extruded AZ91D alloy[J].Journal of Xi'an University of Technology, 2005, 21(4): 356-360.
[11]
GEIGER M, MERKLEIN M. Sheet metal forming-a new kind of forge for the future[J].Key Eng Mater,2007,344: 9-20.
[12]
SCHUMANN S. The paths and strategies for increased magnesium applications in vehicles[J].Materials Science Forum,2005,488-489:1-8.
[13]
PALUMBO G, SORGENTE D, TRICARICO L. Numerical-experimental analysis of thin magnesium alloy stripes subjected to stretch-bending[J].Journal of Materials Processing Technology, 2008, 201(1-3):183-188.
