徐滨士, 谭俊, 陈建敏. 表面工程领域科学技术发展[J]. 中国表面工程, 2011, 24(2): 1-12.XU Bin-shi, TAN Jun, CHEN Jian-min. Science and technology development of surface engineering[J]. China Surface Engineering, 2011, 24(2): 1-12.
[2]
徐滨士, 李长久. 表面工程与热喷涂技术及其发展[J].中国表面工程, 1998, 1(1): 3-9. XU Bin-shi, LI Chang-jiu. Surface engineering and thermal spraying technology and their developments[J]. China Surface Engineering, 1998, 1(1): 3-9.
[3]
WILLIAMSON R L, FINCLE J R, CHENG C H.A computational examination of the sources of statistical variance in particle parameters during thermal plasma spraying[J]. Plasma Chemistry and Plasma Processing, 2000, 20(3): 299-324.
马维, 潘文霞, 张文宏, 等. 热喷涂涂层中残余应力分析和检测研究发展[J].力学进展, 2002, 32(1):41-56. MA Wei, PAN Wen-xia, ZHANG Wen-hong, et al. Residual stress analysis and detection of research and development in thermal spray coatings[J]. Advances in Mechanics, 2002, 32(1):41-56.
[6]
ZHANG Xian-cheng, XU Bin-shi, WANG Hai-dou, et al. Analyses on some typically approximate solutions of residual stress within a thin film on a substrate[J]. Journal of Applied Physics. 2005, 12(2): 142-144.
[7]
YANG Y C, CHANG E. Measurements of residual stresses in plasma-sprayed hydroxyapatite coatings on titanium alloy[J]. Surface and Coatings Technology, 2005, 190(1):122-131.
[8]
李家宝, 盖秀颖, 徐建辉. 硬状态钢喷丸层组织强化的表征[J]. 材料研究学报, 2003, 17(2): 214-219.LI Jia-bao, GAI Xiu-ying, XU Jian-hui. Characterization of structure strengthening for shot peening affected layers of steels in hard state[J]. Chinese Journal of Materials Research, 2003, 17(2): 214-219.
[9]
NOBRE J P, DIAS A M, GIBMEIER J, et al. Local stress-ratio criterion for incremental hole-drilling measurements of shot-peening stresses[J]. Journal of Engineering Materials and Technology, 2006, 128(2): 193-201.
[10]
高玉魁, 殷源发, 李向斌, 等. 喷丸强化对0Cr13Ni8Mo2Al 钢疲劳性能的影响[J]. 材料工程, 2011, (12): 46-48. GAO Yu-kui, YIN Yuan-fa, LI Xiang-bin, et al. Influence of shot peening on fatigue property for 0Cr13Ni8Mo2Al steel[J].Journal of Materials Engineering, 2011, (12):46-48.
