张亮, 韩继光, 郭永环, 等. 含纳米铝颗粒SnAgCu钎料组织与性能[J]. 焊接学报, 2013, 34(6):65-68.ZHANG Liang, HAN Ji-guang, GUO Yong-huan, et al. Microstructure and properties of SnAgCu solders bearing Al nano-particles[J]. Transactions of the China Welding Institution, 2013, 34(6):65-68.
[2]
LIU P, YAO P, LIU J. Effect of SiC nanoparticle additions on microstructure and microhardness of Sn-Ag-Cu solder alloy[J]. Journal of Electronic Materials, 2008, 37(6):874-879.
[3]
BUKAT K, KOSCIELSKI M, SITEK F, et al. Silver nanoparticles effect on the wettability of Sn-Ag-Cu solder pastes and solder joints microstructure on copper[J]. Soldering & Surface Mount Technology, 2011, 23(3):150-160.
[4]
HASEEB A S M A, ARAFAT M M, JOHAN M R. Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds[J]. Materials Characterization, 2012, 64:27-35.
[5]
张 亮, 韩继光, 郭永环, 等. WLCSP器件Sn3.9Ag0.6Cu焊点疲劳寿命预测[J]. 焊接学报, 2012, 33(3):95-100.ZHANG Liang, HAN Ji-guang, GUO Yong-huan, et al. Fatigue life prediction of Sn3.9Ag0.6Cu soldered joints in WLCSP device[J]. Transactions of the China Welding Institution, 2012, 33(3):95-100.
[6]
ZHANG L, XUE S B, ZENG G, et al. Interface reaction between SnAgCu/SnAgCuCe solders and Cu substrate subjected to thermal cycling and isothermal aging[J]. Journal of Alloys and Compounds, 2012, 510(1):38-45.
[7]
薛松柏, 吴玉秀, 崔国平, 等. 热循环对QFP焊点强度及其微观组织影响规律的数值模拟[J]. 焊接学报, 2006, 27(11):1-4.XUE Song-bai, WU Yu-xiu, CUI Guo-ping, et al. Numerical simulation of effect of thermal cycling on tensile strength and microstructure of QFP soldered joints[J]. Transactions of the China Welding Institution, 2006, 27(11):1-4.
[8]
刘琼, 卢斌, 栗慧, 等. 添加0.1%Ce对Sn-3.0Ag-0.5Cu焊料与铜基板间的金属间化合物的影响[J]. 中国稀土学报, 2007, 25(6):707-712.LIU Qiong, LU Bin, LI Hui, et al. Effect of adding 0.1% Ce into Sn-3.0Ag-0.5Cu solder alloy on its microstructure and intermetallic compounds with Cu substrate[J]. Journal of the Chinese Rare Earth Society, 2007, 25(6):707-712.
[9]
齐丽华, 黄继华, 张建纲, 等. 热-剪切循环条件下Sn-3.5Ag-0.5Cu/Cu(Ni)界面化合物生长行为研究[J]. 稀有金属材料与工程, 2007, 36(2):241-244.QI Li-hua, HUANG Ji-hua, ZHANG Jian-gang, et al. Growth behavior of intermetallic compounds on Sn-3.5Ag-0.5Cu/Cu(Ni) interface under thermal-shearing cycling condition[J]. Rare Metal Materials and Engineering, 2007, 36(2):241-244.
[10]
GAIN A K, FOUZDER T, CHAN Y C, et al. Microstructure, kinetic analysis and hardness of Sn-Ag-Cu-1wt% nano-ZrO2 composite solder on OSP-Cu pads[J]. Journal of Alloys and Compounds, 2011, 509(7):3319-3325.
[11]
SONG J M, LIU Y R, LAI Y S, et al. Influence of trace alloying elements on the ball impact test reliability[J]. Microelectronics Reliability, 2012, 52(1):180-189.
[12]
ZHANG L, HE C W, GUO Y H, et al. Development of SnAg-based lead-free solders in electronics packaging[J]. Microelectronics Reliability, 2012, 52(3):559-578.
[13]
陈建勋, 赵兴科, 刘大勇, 等. 电子组装用SnAgCu系无铅钎料的研究进展[J]. 材料工程, 2013, (9): 91-98. CHEN Jian-xun, ZHAO Xing-ke, LIU Da-yong, et al. Research development of SnAgCu system lead-free solders in electronics packing[J]. Journal of Materials Engineering, 2013, (9):91-98.
