李成功, 巫世杰, 戴圣龙, 等. 先进铝合金在航空航天工业中的应用与发展[J].中国有色金属学报, 2002, 12(1): 14-21.LI C G, WU S J, DAI S L, et al. Application and development of advanced aluminum alloy in aerospace industry[J]. The Chinese Journal of Nonferrous Metals, 2002, 12(1): 14-21.
[2]
陈昌麒.超高强铝合金的发展[J].中国有色金属学报, 2002, 12 (增刊1): 22-27. CHEN C Q. Development of ultrahigh-strength aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 2002, 12(Suppl 1): 22-27.
[3]
王胜强, 王少华, 马志峰, 等. 一种新型Al-Zn-Mg-Cu-Zr合金的变形行为研究[J].材料工程, 2012, (6):11-15. WANG S Q, WANG S H, MA Z F, et al. Investigation on deformation behavior of a new type Al-Zn-Mg-Cu-Zr alloy[J]. Journal of Materials Engineering, 2012, (6):11-15.
[4]
SENKOV O N, SHAGIEV M R, SENKOVA S V. Precipitation of Al3(Sc, Zr) particles in an Al-Zn-Mg-Cu-Sc-Zr alloy during conventional solution heat treatment and its effect on tensile properties[J]. Acta Materialia, 2008, 56(15):3723-3738.
WU Z G, SONG M, HE Y H. Effects of Er on the microstructure and mechanical properties of an as-extruded Al-Mg alloy[J]. Materials Science and Engineering: A, 2009, 504(1-2):183-187.
[7]
XU G F, MOU S Z, YANG J J, et al. Effect of trace rare earth element Er on Al-Zn-Mg alloy[J]. Transactions of Nonferrous Metals Society of China, 2006, 16 (3): 598-603.
[8]
阮海琼.稀土元素铒(Er)在Al-Zn-Mg合金中的作用[D].北京:北京工业大学, 2004.
[9]
杨军军, 聂祚仁, 金头男, 等. 稀土铒在Al-Zn-Mg合金中的存在形式与细化机理[J]. 中国有色金属学报, 2004, 14(4):620-626.YANG J J, NIE Z R, JIN T N, et al. Form and refinement mechanism of element Er in Al-Zn-Mg alloy[J]. The Chinese Journal of Nonferrous Metals, 2004, 14(4):620-626.
[10]
秦肖.稀土Er对1420铝锂合金组织和性能的影响[D].北京:北京工业大学, 2004.
[11]
WANG S H, MENG L G, YANG S J, et al. Microstructure of Al-Zn-Mg-Cu-Zr-0.5Er alloy under as-cast and homogenization conditions[J]. Transactions of the Nonferrous Metals Society of China, 2011, 21(7): 1449-1454.
[12]
李国锋, 张新明, 朱航飞. 微量Er, Y对 Al-Zn-Mg-Cu-Zr合金均匀化的影响[J].航空材料学报, 2010, 30(6):1-5. LI G F, ZHANG X M, ZHU H F. Effect of minor Er and Y additions to Al-Zn-Mg-Cu-Zr alloy on homogenizing behavior[J]. Journal of Aeronautical Materials, 2010, 30(6):1-5.
[13]
STILLER K, WARREN P J, HANSEN V, et al. Investigation of precipitation in an Al-Zn-Mg alloy after two-step ageing treatment at 100℃and 150℃[J]. Materials Science and Engineering: A, 1999, 270(1):55-63.
[14]
STARINK M J, LI X M. A model for the electrical conductivity of peak-aged and over aged Al-Zn-Mg-Cu alloys[J]. Metallurgical and Materials Transactions A, 2003, 34(4): 899-911.
