SHABESTARI S G, MAHMUDI T, EMAMY M, et al. Effect of Mn and Sr on intermetallics in Fe-rich eutectic Al-Si alloy[J].International Journal of Cast Metals Research,2002,15(1):17-24.
[2]
孙剑飞,谢壮德,沈军,等.快速凝固/粉末冶金高硅铝合金微观组织及拉伸性能[J]. 材料工程,2001,(11):13-16.SUN Jian-fei, XIE Zhuang-de, SHEN Jun, et al. Microstructure and tensile properties of a rapidly solidified high silicon aluminum alloy[J].Journal of Materials Engineering,2001,(11):13-16.
[3]
SHON IN-JIN, JO SEUNG-HOON, KO IN-YONG, et al. Fast consolidation of a nanocrystalline Al2O3 reinforced 3.7Fe0.54-Cr0.18Al0.26Si0.016 composite from mechanical synthesized powder through pulsed current activated heating[J]. Journal of Alloys and Compounds,2010,509(19):L183-L186.
[4]
TSUNEKAWA Y, SUZUKI H, GEMMA Y. Application of ultrasonic vibration to in situ MMC process by electromagnetic melt stirring[J]. Materials and Design,2001,22(6):467-472.
[5]
付高峰,姜澜,刘吉,等.反应自生氧化铝颗粒增强铝基复合材料[J].中国有色金属学报,2006,16(5):853-857.FU Gao-feng, JIANG Lan, LIU Ji,et al. In situ decomposed Al2O3 particles reinforced aluminum matrix composites[J]. The Chinese Journal of Nonferrous Metals,2006,16(5):853-857.
[6]
胡明,高晶,于海成,等.原位自生Al2O3-TiCp/Al基复合材料的热力学分析[J]. 材料工程,2010,(3):74-78. HU Ming, GAO Jing, YU Hai-cheng, et al. Thermodynamic analysis of in-situ Al2O3-TiCp/Al composites by MC technique[J].Journal of Materials Engineering,2010,(3):74-78.
[7]
李文钊, 边秀房.铝铁复合铸造界面金相研究[J].机械工程学报,2011,47(16):67-72. LI Wen-zhao, BIAN Xiu-fang. Metallographic study of interface achieved by aluminum-iron compound casting[J]. Chinese Journal of Mechanical Engineering,2011,47(16):67-72.
[8]
MUNOZ-MORRIS M A, GARCIA C, MORRIS D G. An analysis of strengthening mechanism in a mechanically alloyed, oxide dispersion strengthened iron aluminide intermetallic[J]. Acta Materiallia,2002,50(11):2825-2836.
[9]
ZHANG W J, SUNDAR R S, DEEVI S C. Improvement of the creep resistance of FeAl-based alloys[J]. Intermetallies,2004,(12):893-897.
[10]
ARHAMI M, SARIOGLU F,KALKANLI A, et al. Microstructural characterization of squeeze-cast Al-8Fe-1.4V-8Si[J]. Materials Science and Engineering:A,2008,485(1):218-223.
[11]
陈玉勇,杨非,孔凡涛,等.烧结温度对TiAl合金块体材料组织和性能的影响[J]. 材料工程,2010,(4):1-4. CHEN Yu-yong, YANG Fei, KONG Fan-tao, et al. Effect of sintering temperature on microstructure and properties of TiAl bulk materials[J]. Journal of Materials Engineering,2010,(4):1-4.
[12]
陈振华, 贺毅强, 陈志钢, 等. SiCP/Al-8.5Fe-1.3V-1.7Si复合材料的显微组织及室温力学性能[J]. 中国有色金属学报,2007,17(6):858-859. CHEN Zhen-hua, HE Yi-qiang, CHEN Zhi-gang, et al. Microstructure and ambient temperature mechanical properties of SiCp/Al-8.5Fe-1.3V-1.7Si composite[J].The Chinese Journal of Nonferrous Metals,2007,17(6):858-859.
[13]
TONG X C, FANG H S. Al-TiC composites in situ-processed by ingot metallurgy and rapid solidification technology[J]. Metallurgical and Materials Transactions A,1998,29(3):893-902.
[14]
LIU J H, MA T Y,TONG H, et al. Electromagnetic wave absorption properties of flaky Fe-Ti-Si-Al nanocrystalline composites[J]. Journal of Magnetism and Magnetic Materials,2010,322(8):940-944.
[15]
赵瑞峰,刘宗侠,杨明生,等.Mg对原位合成TiB2/Al-7Si复合材料的微观组织及力学性能的影响[J].中国有色金属学报,2009, 19(9):1548-1554.ZHAO Rui-feng, LIU Zong-xia, YANG Ming-sheng, et al. Effect of Mg on microstructures and mechanical properties of in-situ TiB2/Al-7Si composite[J]. The Chinese Journal of Nonferrous Metals,2009,19(9):1548-1554.
[16]
CHEN Z C, TAKENOBU TAKEDA, KEISUKE IEDA. Microstructural evolution of reactive-sintered aluminum matrix composites[J]. Composites Science and Technology,2008,(68):2245-2253.
[17]
PARK J M,KIM D H, MATTERN N, et al. Microstructure and mechanical properties of Fe-Si-Ti-(Cu, Al) heterostructured ultrafine composites[J].Journal of Alloy and Compounds,2011,509(suppl):367-370.
[18]
QIN Q D, ZHAO Y G, ZHAO Y, et al. Preparation of AlFeSiV compounds local reinforced Al matrix composite by pressureless reactive infiltration technique[J]. Materials Science and Engineering:A,2008,(487):352-359.
[19]
ARHAMI M, SARIOGLU F, KALKANLI A, et al. Microstructural characterization of squeeze-cast Al-8Fe-1.4V-8Si[J].Materials Science and Engineering:A,2008,(485):218-223.
