李奇, 王宪成, 何星, 等. 高功率密度柴油机缸套-活塞环摩擦副磨损失效机理[J]. 中国表面工程, 2012, 25(4):36-41.LI Q, WANG X C, HE X, et al. Wear failure mechanism of cylinder liner-piston ring friction pair for high power diesel engines[J]. China Surface Engineering, 2012, 25(4): 36-41.
[2]
蔡志海, 张平, 杜军, 等. 65Mn 钢基体 CrTiAlN 微纳米复合膜的制备与抗高温磨损性能研究[J]. 稀有金属材料与工程, 2010, 39(6): 336-340.CAI Z H, ZHANG P, DU J, et al. Investigation of preparation technologies and tribological properties at high-temperature of CrTiAlN composite films on 65Mn steel substrates[J]. Rare Metal Materials and Engineering, 2010, 39(6): 336-340.
[3]
TRUHAN J J, QU Jun, BLAU P J. A rig test to measure friction and wear of heavy duty diesel engine piston rings and cylinder liners using realistic lubricants[J]. Tribology International, 2005, 38(3): 211-218.
HAHN M, BAUER C H, THEISSMANN R. The impact of microstructural alterations at spray coated cylinder running surfaces of diesel engines-findings from motor and laboratory benchmark tests[J]. Wear, 2011, 271(9-10):2599-2609.
[6]
王云霞, 阎逢元. SRV4摩擦测试系统在材料研究中的应用[J]. 工程与实验, 2009, (12): 30-59.WANG Y X, YAN F Y. Application of SRV4 testing system in materials research[J]. Engineering and Test, 2009, (12): 30-59.
[7]
黄刚, 吴开明, 周峰, 等. 薄板坯连铸连轧生产65Mn钢的CCT曲线和淬透性[J]. 材料工程, 2012, (4): 52-55.HUANG G, WU K M, ZHOU F, et al. CCT Diagram and hardenability of 65Mn steel produced by compact strip production[J]. Journal of Material Engineering, 2012, (4): 52-55.
[8]
NAM P S. Tribophysics[M]. Beijing:World Publishing Corporation, 1989.73-75.
[9]
GUO C, CHEN J M, ZHOU J S, et al. Microstructure and tribological properties of TiAg intermetallic compound coating[J]. Applied Surface Science, 2011, 257(24): 10692-10698.
[10]
LA P Q, MA J Q, ZHU Y T, et al. Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation[J]. Acta Materialia, 2005, 53(19): 5167-5173.
[11]
ASADI K S, ZARE B A, AKBARI A. The effect of sliding speed and amount of loading on friction and wear behavior of Cu-0.65 wt% Cr alloy[J]. Journal of Alloys Compounds, 2009, 486(1): 319-324.
