LIU P S,LIANG K M.Functional materials of porous metals made by P/M,electroplating and some other techniques[J].J Meter Sci,2001,36(21):5059-5072.
[8]
ASHBY M F,EVANS A,FLECK N A,et al.Metal Foams:A Design Guide[M].Boston:Elsevier Science,2000.
[9]
NAGAKI S,SOWERBY R,GOYA M.An anisotropic yield function for porous metal[J].Materials Science and Engineering A,1991,142:163-168.
[10]
LIU P S.The tensile strength of porous metals with high porosity[J].J Adv Mater,2000,32(2):9-16.
[11]
BADICHE X,FOREST S,GUIBERT T,et al.Mechanical properties and non-homogeneous deformation of open-cell nickel foams:application of the mechanics of cellular solids and of porous materials[J].Mater Sci Eng A,2000,289:276-288.
[12]
BENOUALI A H,FROYEN L,DELERUE J F,et al.Mechanical analysis and microstructural characterisation of metal foams[J].Materials Science and Technology,2002,18(5):489-494.
[13]
KWON Y W,COOKE R E,PARK C.Representative unite-cell models for open-cell metal foams with or without elastic filler[J].Materials Science and Engineering A,2003,343:63-70.
[14]
CHOE H,DUNAND D C.Mechanical properties of oxidation-resistant Ni-Cr foams[J].Materials Science and Engineering A,2004,384(1-2):184-193.
[15]
LIU P S.Effect of preparation conditions on relative elongation of nickel foam[J].Materials Science and Technology,2004,20(5):669-672.
[16]
刘培生.关于多孔材料的新模型[J].材料研究学报,2005,19(6):64-68.
[17]
LIU P S.Mechanical behaviors of porous metals under biaxial tensile loads[J].Mater Sci Eng A,2006,422(1-2):176-183.
[18]
LIU P S.A new analytical model about the relationship between nominal failure stresses and porosity for foamed metals under biaxial tension[J].Materials and Design,2007,28:2678-2683.
