CHEN C R,PASCUAL J,FISCHER F D,et al.Prediction of the fracture toughness of a ceramic multilayer composite-modeling and experiments[J].Acta Materialia,2007,55:409-421.
[3]
HOLLECK H,SCHIER V.Multilayer PVD coatings for wear protection[J].Surface and Coatings Technology,1995,76-77:328--336.
[4]
GHOSH S K,LIMAYE P K,SWAIN B P,et al.Tribological be-haviour and residual stress of electrodeposited Ni/Cu muhilayer films on stainless steel substrate[J].Surface and Coatings Tech-nology,2007,201:4609-4618.
[5]
DISERENS M,PATscHEIDER J,LEVY F.Mechanical prop-erties and oxidation resistance of nanocomposite TiN-SiNx physi-cal-vapor-deposited thin films[J].Surface and Coatings Technolo-gy,1999,120-121;158-165.
[6]
OBERLE T L.Properties influencing wear of metals[J].J Met-als,1951,3:438-442.
[7]
MATTHEWS A,JONES R,DOWEY S P.Modelling the de-formation behaviour of muhilayer coatings[J].Tribology Let-ters,2001,11:103-106.
[8]
WIKLUND U,HEDENQVIST P,HOGMARK S.Muhilayer cracking resistance in bending[J].Surface and Coatings Tech-nology,1997,97:773-778.
[9]
MA K J,BLOYCE A,BELL T.Examination of mechanical properties of TiN and Ti-TiN muhilayer coatings[J].Surface and Coatings Technology,1995,76-77:297-302.
[10]
WEN L S,HUANG R F,GUO L P.Microstructure and me-chanical properties of metal/ceramic TiN/Ti multilayers[J].Journal of Magnetism and Magnetic Materials,1993,126:200-202.
[11]
LARSSON M,BROMARK M,HEDENQVIST P.Deposition and mechanical properties of multilayered PVD Ti-TiN coatings[J].Surface and Coatings Technology,1995,76-77:202-205.
[12]
BROMARK M,LARSSON M,HEDENQVIST P,et al.Wear of PVD TiN/Ti multilayer coatings[J].Surface and Coatings Tech-nology,1997,90:217-223.
CHOI S R,SALEM J A.Evaluation of the fracture toughness of Nb-40al-8Cr-1W-1Y-0.05B Intermetallic material by indentation techniques[J].Journal of Materials Science,1993,28:155-160.
[15]
PONTON C B,RAWLINGS R D.Vickers indentation fracture toughness test part I:Review of Literature and Formulation of Standardised indentation toughness equations[J].Materials Sci-ence and Engineering,1989,5:865-872.
[16]
HOLLECK H,SCHIER V.Muhilayer PVD coatings for wear protection[J].Surface and Coatings Technology,1995,76-77:328-336.
[17]
SU Y L,KAO W H.Optimum muhilayer TiN-TiCN coatings for wear resistance and actual application[J].Wear,1998,223:119-130.
[18]
LEYLAND A,MATTHEWS A.Design criteria for wear-resist-ant nanostructured and glassy-metal coatings[J].Surface and Coatings Technology,2004,177-178:317-324.
[19]
LEYLAND A,MATTHEWS A.On the significance of the H/E ratio in wear control:a nanocomposite coating approach to opti-mised tribological behavior[J].Wear,2000,246:1-11.
[20]
BULL S J,JONES A M.Multilayer coatings for improved per-formance[J].Surface and Coatings Technology,1996,78:173-184.
[21]
ZHANG S,SUN D,FU Y Q,et al.Recent advances of super-hard nanocomposite coatings:a review[J].Surface and Coatings Technology,2003,167:113-117.
PONTON C B,RAWLINGS R D.Vickers indentation fracture toughness test part II:application and critical evaluation of stan-dardised indentation toughnessequations[J].Materials Science and Engineering,1989,5:961-976.
[25]
HEINKE W,LEYLAND A,MATTHEWS A.Evaluation of PVD nitride coatings,using impact,scratch and Rockwell-C ad-hesion tests[J].Thin Solid Films,1995,270:431-438.
[26]
SUH N P,SIN H C.The genesis of friction[J].Wear,1981,69:91-114.
[27]
ZUMGAHR H K.Wear of Materials[M].New York:ASME,1979.123-126.
