村上哲.アルミニうムの合金押出材と加工技術[J] . 塑性と加工,2008,49(567):25-30.MURAKAMI S. Adoption of aluminum extrusion and its technology[J]. Journal of the Japan Society for Technology of Plasticity, 2008, 49(567): 25-30.
[2]
谢建新,刘静安.金属挤压理论与技术[M].北京:冶金工业出版社,2001.
[3]
XIE J X, MURAKAMI T, IKEDA K. Experimental simulation of metal flow in porthole-die extrusion[J]. Journal of Materials Processing Technology,1995,49(1-2):1-11.
[4]
WU X H, ZHAO G Q, LUAN Y G, et al. Numerical simulation and die structure optimization of an aluminum rectangular hollow pipe extrusion process[J]. Materials Science and Engineering A, 2006,435(5):266-274.
[5]
YANG D Y, KIM K J. Design of processes and products through simulation of three-dimensional extrusion[J]. Journal of Materials Processing Technology,2007,191(1-3):2-6.
黄东男,李静媛,张志豪,等.方形管分流模双孔挤压过程中金属的流动行为[J].中国有色金属学报,2010,20(3): 487-495. HUANG D N, LI J Y, ZHANG Z H, et al. The metal flowing behaviors during the diplopore extrusion of square tube by a porthole die[J]. The Chinese Journal of Nonferrous Metals,2010,20(3):487-495.
[8]
JO H H, LEE S K, JUNG S C. A non-steady state FE analysis of Al tubes hot extrusion by a porthole die [J]. Journal of Materials Processing Technology, 2006, 173(2): 223-231.
[9]
LIU G, ZHOU J, DUSZCZYK J. FE analysis of metal flow and weld seam formation in a porthole die during the extrusion of a magnesium alloy into a square tube and the effect of ram speed on weld strength [J]. Journal of Materials Processing Technology, 2008,200(1-3):185-198 .
[10]
程磊,谢水生,黄国杰,等. 分流组合模挤压过程的有限元分步模拟[J].系统仿真学报,2008,20(24):6603-6608.CHENG L, XIE S S,HUANG G J,et al. Multi-stage finite element simulation of porthole die extrusion process[J]. Journal of System Simulation, 2008,20(24):6603-6608.
[11]
邸利青,张士宏.分流组合模挤压过程数值模拟及模具优化设计[J].塑性工程学报,2009,16(2):123-127.DI L Q,ZHANG S H. Porthole die extrusion process numerical simulation and optimal die design[J]. Journal of Plasticity Engineering, 2009, 16(2):123-127.
[12]
JUNG M L, BYUNG M K, CHUNG G K. Effects of chamber shapes of porthole die on elastic deformation and extrusion process in condenser tube extrusion[J].Materials and Design,2005, 26(4):327-336.
[13]
LI L, ZHANG H, ZHOU J. Numerical and experimental study on the extrusion through a porthole die to produce a hollow magnesium profile with longitudinal weld seams[J]. Materials and Design, 2008,29(6): 1190-1198.
