CARLSSON L. Interlaminar stresses at a hole in a composite member subjected to in-plane loading[J].J Composite Materials, 1991, 25(3):238-249.
[2]
CHANG F K, CHAMG K Y. A progressive damage model for laminated composites containing stress concent rations[J].J Composite Materials, 1987, 21(6): 834-855.
[3]
CHANG K Y, LIU S, CHANG F K. Damage tolerance of laminated composites containing an open hole and subjected to tensile loading[J].J Composite Materials, 1991, 25(3): 274-301.
[4]
LESSARD L B, CHANG F K. Damage tolerance of laminated composites containing an open hole and subjected to compressive loadingⅡ: experiment[J].J Composite Materials, 1991, 25 (1): 44-64.
[5]
崔海涛, 郝勇, 温卫东. 含孔复合材料层合板逐渐损伤破坏分析[J]. 理化检验-物理分册, 2002, 38(4):150-153.CUI H T, HAO Y, WEN W D. Accumulative damage and failure analysis of laminated composites with hole[J].PTCA(Part A:Physical Testing ), 2002, 38(4):150-153.
[6]
王丹勇, 温卫东, 崔海涛. 含孔复合材料层合板静拉伸三维逐渐损伤分析[J]. 力学学报, 2005, 37(6): 788-794. WANG D Y, WEN W D, CUI H T. Three dimensional progressive damage analysis of composite laminates containing a hole subjected tensile loading[J].Chinese Journal of Theoretical and Applied Mechanics, 2005, 37(6): 788-794.
[7]
王跃全, 童明波, 朱书华. 三维复合材料层合板渐进损伤非线性分析模型[J]. 复合材料学报, 2009, 26(5):159-166.WANG Y Q, TONG M B, ZHU S H. 3D nonlinear progressive damage analysis model for composite laminates[J]. Acta Materiae Compositae Sinica, 2009, 26(5):159-166.
[8]
姜云鹏, 张庆茂, 王毅, 等. 复合材料层合板开口翻边补强试验和数值模拟[J]. 复合材料学报, 2005, 22(5): 190-196.JIANG Y P, ZHANG Q M, WANG Y, et al. Experiment studies and FEM simulation repaired composite laminates[J].Acta Materiae Compositae Sinica, 2005, 22(5): 190-196.
[9]
韩小平, 曹效昂, 朱西平, 等. 孔口缝合补强对含孔层板应变集中影响的实验研究[J]. 复合材料学报, 2006, 23(4): 169-174.HAN X P, CAO X A, ZHU X P, et al. Experimented investigation on strain concentration in composite with a circular hole[J].Acta Materiae Compositae Sinica, 2006, 23(4): 169-174.
[10]
韩小平, 曹效昂, 朱西平, 等. 复合材料开口缝合补强结构力学性能实验研究[J]. 工程力学, 2008, 25(1):122-126. HAN X P, CAO X A, ZHU X P, et al. Mechanical property experimental study of stitching reinforced composite member with a hole[J].Engineering Mechanics, 2008, 25(1):122-126.
[11]
曹效昂. 孔口缝合补强复合材料的实验研究和数值模拟. 西安:西北工业大学, 2007.
[12]
LINDE P, PLEITER J, BOER H D. Modeling and simulation of fiber metal laminates.ABAQUS User's Conference.Boston:Massachusetts, 2004.421-439.
[13]
卢子兴, 徐强, 王伯平, 等. 含缺陷平纹机织复合材料拉伸力学行为数值模拟[J]. 复合材料学报, 2011, 28(6):200-207. LU Z X, XU Q, WANG B P, et al. Numerical simulation of plain weave composites with defects under unidirectional tension[J].Acta Materiae Compositae Sinica, 2011, 28(6):200-207.
