刘宏伟,张龙,王建江,等.自反应喷射成形制备TiC-TiB2复合陶瓷坯件[J].材料研究学报,2008,22(2):274-278.LIU Hongwei,ZHANG Long,WANG Jianjiang,et al.J Mater Res(in Chinese),2008,22(2):274-278. [2]KWONA W T,PARK J S,KIMB S W,et al.Effect of WC and group IV carbides on the cutting performance of Ti(C,N)cermet tools[J].Int J Mach Tools Manuf,2004,44:341-346. [3]王建江,杜心康,刘宏伟,等.Al对自反应火焰喷涂TiC-TiB2复合陶瓷涂层的影响[J].无机材料学报,2007,22(3):550-554.WANG Jianjinag,DU Xinkang,LIU Hongwei,et al.J Inorg Mater(in Chinese),2007,22(3):550-554. [4]李伟波.团聚粉制备工艺对反应火焰喷涂TiC-TiB2复相陶瓷涂层影响研究[D].石家庄:军械工程学院,2007.LI Weibo.Study on influence of agglomerate powders preparation on TiC-TiB2multi-phase ceramics coatings sprayed by reactive flame spray(in Chinese dissertation).Shijiazhuang,China:Ordnance Engi-neering College,2007. [5]刘宏伟.自反应喷射成形Ti(C,N)-TiB2基复合陶瓷坯件研究[D].石家庄:军械工程学院,2008.LIU Hongwei.Study on self-reactive spray forming Ti(CN)-TiB2-based composite ceramic preforms(in Chinese,dissertation).Shijiaz-huang,China:Ordnance Engineering College,2008. [6]付永信.TiC-TiB2陶瓷涂层自反应火焰喷涂过程及梯度连接研究[D].石家庄:军械工程学院,2006.FU Yongxin.Study on the reactive flame sprayed process and the graded bonding of the TiC-TiB2ceramics coatings(in Chinese,disser-tation).Shijiazhuang,China:Ordnance Engineering College,2006. [7]CARDINAL S,MALCHERE A,GARNIER V,et al.Microstructure and mechanical properties of TiC-TiN based cermets for tools applica-tion[J].Int J Refract Met Hard Mater,2009,27:521-527. [8]吴新灿,陈熙.等离子体喷涂中涂层形成的模拟[J].清华大学学报:自然科学版,2003,43(11):1504-1508.WU Xincan,CHEN Xi.J Tsinghua Univ:Sci Technol(in Chinese),2003,43(11):1504-1508. [9]LIU N,YIN W H,ZHU L W.Effect of TiC/TiN powder size on micro-structure and properties of Ti(C,N)-based cermets[J].Mater Sci Eng A,2007,445-446:707-716. [10]ZHANG X B,LIU N,YANG H D,et al.Boronizing of nano-TiN modified TiC-based cermets[J].Int J Refract Met Hard Mater,2009,27:653-658. [11]XUE Y,WANG H M.Microstructure and wear resistance of laser melted Ti5Si3-TiCo-Ti2Co multiphase intermetallic alloys[J].Rare Met Mater Eng,2009,36(9):1623-1627. [12]晁晟,袁玉鹏,韩成良,等.原始粉末粒度对Ti(C,N)基金属陶瓷组织及力学性能的影响[J].硬质合金,2005,22(1):27-31.CAO Sheng,YUAN Yupeng,HAN Chengliang,et al.Carbide(in Chinese),2005,22(1):27-31.
