AI Xin, ZHAO Jun, HUANG Chuanzhen, et al. Development of an advanced ceramic tool material-functionally gradient cutting ceramics [J]. Mater Sci Eng A, 1998, 248(1-2): 125-131. [2] 赵军, 艾兴, 张建华, 等. 梯度功能陶瓷刀具材料的残余应力设计及制备[J]. 硅酸盐学报, 1998, 26(3): 292-299. ZHAO Jun, AI Xing, ZHANG Jianhua, et al. J Chin Ceram Soc (in Chinese), 1998, 26(3): 292-299. [3] NOMURA T, MORIGUCHI H, TSUDA K, et al. Material design method for the functionally graded cemented carbide tool [J]. Int J Refract Met Hard Mater, 1999, 17: 397-404. [4] CHO J R, PARK H J. High strength FGM cutting tools: finite element analysis on thermoelastic characteristics [J]. J Mater Process Technol, 2002, 130-131: 351-356. [5] WANG R G, PAN W, CHEM J, et al. Fabrication and characterization of machinable Si3N4/h-BN functionally graded materials [J]. Mater Res Bull, 2002, 37: 1269-1277. [6] TOHGO K, IIZUKA M, ARAKI H, et al. Influence of microstructure on fracture toughness distribution in ceramic-metal functionally graded materials [J]. Eng Fract Mech, 2008, 75: 4529-4541. [7] CAROLINE S L, SUNG-HOON A, LUTGARD D, et al. Effect of functionally graded material (FGM) layers on the residual stress of polytypoidally joined Si3N4-Al2O3 [J]. Mater Sci Eng A, 2006, 434: 160-165. [8] NURCAN C S, REYHAN K, FERHAT K, et al. Functionally graded SiAlON ceramics [J]. J Eur Ceram Soc, 2004, 24: 3387-3393. [9] STERNITZKE M. Structural ceramic nanocomposites [J]. J Eur Ceram Soc, 1997, 17: 1061-1082. [10] 赵军. 新型梯度功能陶瓷刀具材料的设计制造与切削性能研究[D]. 济南: 山东工业大学, 1998. ZHAO Jun. Design and fabrication of functionally gradient ceramic tool materials and their cutting performance (in Chinese, dissertation). Jinan: Shandong University of Technology, 1998. [11] 郑光明, 赵军, 宋新玉, 等. 陶瓷刀具切削镍基合金的三维数值模拟[J]. 组合机床与自动化加工技术, 2010, 3: 4-10. ZHENG Guangming, ZHAO Jun, SONG Xinyu, et al. Modul Mach Tool Auto Manuf Tech (in Chinese), 2010, 3: 4-10. [12] 黄向东. β-sialon-15R及15R-Al2O3复相材料的研究[D]. 北京: 北京科技大学, 2001. HUANG Xiangdong. Research on the β-sialon-15R and 15R-Al2O3 composite ceramic (in Chinese, dissertation). Beijing: University of Science and Technology Beijing, 2001. [13] 董鹏莉, 吴凯军, 孟宪民, 等. β-sialon及其复合材料热力学与合成[J]. 中国稀土学报, 2004, 22: 383-387. DONG Pengli, WU Kaijun, MENG Xianmin, et al. J Chin Rare Earth Soc (in Chinese), 2004, 22: 383-387. [14] 吕志杰. 高性能Si3N4/TiC纳米复合陶瓷刀具材料的研制与性能研究[D]. 济南: 山东大学, 2005. Lü Zhijie. Development of high-performance Si3N4/TiC nanocomposite ceramic tool materials and investigation of their properties (in Chinese, dissertation). Jinan: Shandong University, 2005. [15] MIKIO F, KENJI F, AKIRA F. Physical properties and cutting performance of silicon nitride ceramic [J]. Wear, 1985, 102: 195-210. [16] 员冬玲, 邓建新, 段振兴. Al2O3-(W, Ti)C/Al2O3-TiC对称型叠层陶瓷的结构设计和力学性能[J]. 硅酸盐学报, 2008, 36(8): 1148-1152. YUAN Dongling, DENG Jianxin, DUAN Zhenxing. J Chin Ceram Soc (in Chinese), 2008, 36(8): 1148-1152. [17] DENG Jianxin, DUAN Zhenxing, YUN Dongling, et al. Fabrication and performance of Al2O3/(W, Ti)C+Al2O3/TiC multilayered ceramic cutting tools [J]. Mater Sci Eng A, 2010, 527: 1039-1047.
