袁链,张小明.主动脉弓动脉瘤治疗进展[J].中华胸心血管外科杂志,2006,22(6):427-429.YUAN Lian,ZHANG Xiao-ming.Advances of treatment on aortic arch aneurysm[J].Chinese Journal of Thoracic andCardiovascular Surgery,2006,22(6):427-429.(in Chinese)
[2]
BAEKL H,LIEM T K,KWAEK E Y.Flow measurements in a highly curved atheroselerotic comonary artery cast of man[J].J Biomech Eng,1992,114(2):232-240.
[3]
TAYLORC A,HUGHES T J R,ZARINS C K.Finite element modeling of blood flow in arteries[J].Comput Method ApplMech Eng,1998,158(1):156-159.
[4]
MINSUOKK M,DALE B T,MARKUS T,et al.Comparison of two stent in modifying cerebral aneurysm hemodynamics[J].Ann Biomed Eng,2008,36(5):726-741.
[5]
蔡彦,许世雄,景在平,等.腹主动脉瘤几何形态对血液动力学影响的三维数值分析[J].医用生物力学,2008,23(2):140-146.CAI Yan,XU Shi-xiong,JING Zai-ping,et al.Effect of geometry configuration of abdominal aortic aneurysm onhemodynamics by 3D numerical analysis[J].Journal of Medical Biomechanics,2008,23(2):140-146.(in Chinese)
[6]
王伟华,张小军,王芙昱,等.基于CT的脑动脉瘤三维重建的有限元模型[J].医用生物力学,2008,23(4):288-290.WANG Wei-hua,ZHANG Xiao-jun,WANG Fu-yu,et al.3D reconstruction finite element model of cerebral aneurysm basedon CT data[J].Journal of Medical Biomechanics,2008,23(4):288-290.(in Chinese)
[7]
张兆顺,崔桂香.流体力学[M].2版.北京:清华大学出版社,2006:349-357.
[8]
傅中裕,杨晓京.ANSYS与Pro/ENGINEER之间模型数据转换的研究[J].机电工程技术,2005,34(2):51-53.FU Zhong-yu,YANG Xiao-jing.Study on model data transformation between ANSYS and Pro/ENGINEER[J].MachineDevelopment,2005,34(2):51-53.(in Chinese)
[9]
焦洪宇,段敏.Pro/E模型导入ANSYS问题的研究[J].辽宁工学院学报,2004,24(6):37-39.JIAO Hong-yu,DUAN Min.Study of problem on Pro/E model into ANSYS[J].Journal of Liaoning Institute of Technology,2004,24(6):37-39.(in Chinese)
[10]
AENIS M,STANCAMPIANO A P,WAKHLOO A K,et al.Modeling of flow in a straight stented and nonstented side wallaneurysm model[J].J Biomech Eng,1997,119(2):206-212.
[11]
HASSANT,TIMOFEEV E V,SAITO T,et al.Anatomic recon-structions off cerebral vessels as volume numerical grids atthree-dimensional angiography[J].Am J Neuroradiol,2004,25(8):1356-1365.
[12]
LI Z,KLEINSTREUER C.Fluid-structure interaction effects on sac-blood pressure and wall stress in a stented aneurysm[J].J Biomech Eng,2005,127(4):662-671.
[13]
ZHONGHUA L,KLEINSTREUER C.A comparison between different asymmetric abdominal aortic aneurysm morphologiesemploying computational fluid-structure interaction analysis[J].Eur J Mech B Fluid,2007,26:615-631.
[14]
VALENCIA A A,GUZMN A M,FINOL E A,et al.Blood flow dynamics in saccular aneurysm models of the basilar artery[J].J Biomech Eng,2006,128(4):516-526.
[15]
乔爱科,刘有军,张松.支架治疗主动脉弓内侧动脉瘤的仿真研究[J].生物医学工程学杂志,2007,24(4):852-856.QIAO Ai-ke,LIU You-jun,ZHANG Song.Simulation of stent treatment for aneurysms in the inner bend of aortic arch[J].Journal of Biomedical Engineering,2007,24(4):852-856.(in Chinese)
[16]
张研,张锡文,许尚栋.动脉瘤内流场以及瘤体尺寸的影响的数值研究[J].应用力学学报,2006,23(4):423-426.ZHANG Yan,ZHANG Xi-wen,XU Shang-dong.Numerical research on flow field in aneurysm and dimension influence[J].Chinese Journal of Applied Mechanics,2006,23(4):423-426.(in Chinese)
[17]
RAGHAVAN M,HARBAUGH R.Quantified aneurysm shape and rupture risk[J].J Neurosurg,2005,102(2):355-362.
[18]
FLOREZ-VALENCIA L,MONTAGNAT J,ORKISZ M.3D graphical models for vascular-stent pose simulation[J].MachineGraphics and Vision,2004,13(3):235-248.
[19]
万大伟,孙琦,刘应征,等.人体主动脉弓内三维血流动力学数值分析[J].医用生物力学,2008,23(4):279-283.WAN Da-wei,SUN Qi,LIU Ying-zheng,et al.Three-dimensional numerical simulation of hemodynamics in human aorticarch[J].Journal of Medical Biomechanics,2008,23(4):279-283.(in Chinese)
