马立峰,黄庆学,李颖,等.新型滚切剪空间剪切机构优化数学模型的建立及应用[J].四川大学学报:工程科学版,2008,40(2):170-174.MA Li-feng,HUANG Qing-xue,LI Ying,et al.Establishment and application of mathematical model onspatial shear mechanism optimization of new-type steelrolling shear[J].Journal of Sichuan University:Engineering Science Edition,2008,40(2):170-174.(inChinese)
[2]
VARDY A E,BROWN J M B.Transient turbulent frictionin smooth pipe flows[J].Journal of Sound and Vibration,2003,259(5):1011-1036.
[3]
WANG Jing,HAN He-yong,HUANG Qing-xue.Researchon the impact pressure of the hydraulic rolling-cut shear[J].Advanced Materials Research,2011,145:410-414.
[4]
ZHAO Ming,GHIDAOUI M S.Efficient quasi-two-dimensional model for water hammer problems[J].Journalof Hydraulic Engineering,American Society of CivilEngineers,2002,129:1007-1013.
[5]
GORMAN D G,REESE J M,ZHANG Y L.Vibration of aflexible pipe conveying viscous pulsating fluid flow[J].Journal of Sound and Vibration,2000,230(2):379-392.
[6]
徐东光,吴盛林,赵克定.阀控非对称缸位置伺服控制系统正反向速度特性的理论分析与试验研究[J].液压与气动,2005(6):35-39.XU Dong-guang,WU Sheng-lin,ZHAO Ke-ding.Thetheoretical analysis and experimental study about theposition servo system of value controlled single-rod cylinder[J].Chinese Hydraulics&Pneumatics,2005(6):35-39.(in Chinese)
[7]
王栋梁,李洪人,张景春.非对称阀控制非对称缸的分析研究[J].济南大学学报:自然科学版,2003,17(2):118-123.WANG Dong-liang,LI Hong-ren,ZHANG Jing-chun.Research of asymmetrical valve controlling asymmetricalcylinder[J].Journal of Jinan University:Sci&Tech,2003,17(2):118-123.(in Chinese)
[8]
MURAKAWA M,LU Y.Precision cutting of sheets bymeans of a new shear based on rolling motion[J].Journalof Materials Processing Technology,1997,66(4):232-239.
[9]
MURAKAWA M,LU Y.Study on precision shearing ofsheet.Ⅱ.burr-free shearing by means of rolling cutshear[J].Journal of the Japan Society for Technology ofPlasticity,1995,410:242-246.
[10]
GUO Bo,LI Yu-gui,HAN He-yong.Analysis ofasymmetric valve control asymmetric cylinder system ofhydraulic leveler[J].Advanced Materials Research,2011,145:477-480.
[11]
欧阳富,刘彦华,孙东民.关于重新建立空间机构自由度计算公式的探索[J].机械工程学报,2003,39(1):60-64.OUYANG Fu,LIU Yan-hua,SUN Dong-min.Explorationon rebuilding the calculate formula of degree of freedom ofspace mechanism[J].Mechanical Engineering Journal,2003,39(1):60-64.(in Chinese)
[12]
黄庆学,马立峰,李进宝,等.新型滚切剪非对称曲柄机构原理[J].机械工程学报,2008,44(5):119-123.HUANG Qing-xue,MA Li-feng,LI Jin-bao,et al.Principle of asymmetric crank mechanism of new-typerolling shear[J].Chinese Journal of MechanicalEngineering,2008,44(5):119-123.(in Chinese)