HILL W J,HUNTER W G.A review of response surfacemethodology:a literature survey[J].Technometrics,1966,8(4):571-590.
[3]
MYERS R H,MONTGOMERY D C.Response surfacemethodology[M].New York:Wiley and Sons,1995:1-200.
[4]
SHARAMA S C,JAIN S C,BHARUKA D K.Influence ofrecess shape on the performance of a capillary compensatedcircular thrust pad hydrostatic bearing[J].TribologyInternational,2002,35(6):347-356.
[5]
OSMAN T A,DORID M,SAFAR Z S,et al.Experimental assessment of hydrostatic thrust bearingperformance[J].Tribology International,1996,29(3):233-239.
[6]
YADAV J S,KAPUR V K.Variable viscosity and densityeffects in a porous hydrostatic thrust bearing[J].Wear,1981,69(3):261-275.
[7]
SAFAR Z S.Adiabatic solution of a tilted hydrostaticthrust bearing[J].Wear,1983,86(1):133-138.
[8]
SHAO J P,LI H M,YANG X D,et al.Study on flowability of the gap oil film of the multi-oil pad hydrostaticbearing with variable viscosity[C]∥Proceedings ofInternational Conference on Intelligent Human-MachineSystems and Cybemetics.Hangzhou:[s.n.],2009:15-18.
[9]
孙学赟,罗松保.液体静压导轨对置油垫承载能力及刚度的优化设计[J].航空精密制造技术,2005,41(1):14-16.SUN Xue-yun,LUO Song-bao.The optimizationcalculation of load capacity and stiffness for contrapositivehydrostatic pocket of hydrostatic slide[J].AviationPercision Manufacturing Technology,2005,41(1):14-16.(in Chinese)
[10]
陈燕生.液体静压支承原理和设计[M].北京:国防工业出版社,1980:243-292.
[11]
邵俊鹏,张晓彤.液体静压导轨油膜厚度的控制方案研究[J].节能技术,2006,24(6):558-560.SHAO Jun-peng,ZHANG Xiao-tong.Control schemes ofoil film thickness for hydrostatic slide[J].EnergyConservation Technology,2006,24(6):558-560.(inChinese)
[12]
孟心斋,杨建玺,孟昭焱.液体静压支承动态性能新表达式探索与实验验证[J].中国工程科学,2003,5(3):62-66.MENG Xin-zhai,YANG Jian-xi,MENG Zhao-yan.Newformulas of dynamic characteristic of hydrostatic bearingand its testified experiment[J].Engineering Science,2003,5(3):62-66.(in Chinese)
[13]
卢华阳,孙首群.液体静压导轨支承油膜的有限元分析[J].机床与液压,2007,35(10):47-49.LU Hua-yang,SUN Shou-qun.FEA on the oil film of thehydrostatic slider[J].Machine Tool&Hydraulics,2007,35(10):47-49.(in Chinese)
[14]
ZHANG J,DRINKWATER B W.Thin oil-film thicknessdistribution measurement using ultrasonic arrays[J].NDT&E International,2008,41(8):596-601.
[15]
徐文琴,孙英达.机床液体静压导轨油膜厚度确定的研究[J].制造技术与机床,2009(6):56-57.XU Wen-qin,SUN Ying-da.Research on schemes of oilfilm thickness for lathe hydrostatic slide[J].Manufacturing Technology&Machine Tool,2009(6):56-57.(in Chinese)
[16]
杨金福,杨昆,付忠广,等.滑动轴承非线性动态油膜力的解析模型研究[J].润滑与密封,2007,32(9):68-72.YANG Jin-fu,YANG Kun,FU Zhong-guang,et al.Research on analytical model of sliding bearing nonlineardynamic oiil-film force[J].Lubrication Engineering,2007,32(9):68-72.(in Chinese)
[17]
杨金福,刘占生,于达仁,等.滑动轴承非线性油膜力研究[J].哈尔滨工业大学学报,2003,35(3):257-260.YANG Jin-fu,LIU Zhan-sheng,YU Da-ren,et al.Nonlinear film-force of journal bearing[J].Journal ofHarbin Institute of Technology,2003,35(3):257-260.(in Chinese)
[18]
郑铁生,张文,马建敏,等.滑动轴承非线性油膜力的几个理论问题及应用[J].水动力学研究与进展,2003,18(6):761-768.ZHENG Tie-sheng,ZHANG Wen,MA Jian-min,et al.Some theoretical problems on the nonlinear oil-film forcesof sliding bearing and their applications[J].Journal ofhydrodynamics,2003,18(6):761-768.(in Chinese)
[19]
魏旭壕,叶红玲,刘赵淼.液体静压支承转台的动力学分析与数值模拟[J].流体传动与控制,2010,39(2):41-46.WEI Xu-hao,YE Hong-ling,LIU Zhao-miao.Dynamicanalysis and numerical simulation of hydrostatic supportturntable[J].Fluid Power Transmission and Control,2010,39(2):41-46.(in Chinese)
