SMITH D J,SCHUERGER A C,DAVIDSON M M.Survivability of psychrobacter cryohalolentis K5 undersimulated martiansurface conditions[J].Astrobiology,2009,9(2):221-228.
[2]
吴坚,李海亮,刘世柄,等.基于激光微技术的光谱检测集成缩微的研究[J].北京工业大学学报,2010,36(3):425-428.WU Jian,LI Hai-liang,LIU Shi-bing,et al.Spectrumdetection based on laser mico-technology[J].Journal ofBeijing University of Technology,2010,36(3):425-428.(in Chinese)
[3]
郭夏锐,廖志波,王春雨,等.光轴一致性误差对空间透射式系统像差和质量的影响[J].红外与激光工程,2012,41(2):436-441.GUO Xia-rui,LIAO Zhi-bo,WANG Chun-yu,et al.Aberration and alignment quality investigation of spacetransmission optical system with centering error of opticalaxes[J].Infrared and Laser Enginnering,2012,41(2):436-441.(in Chinese)
[4]
杨国光.微光学与系统[M].杭州:浙江大学出版社,2008:289-290.
[5]
程永强,张涛,王鹗,等.激光诱导荧光检测微流控芯片生化分析仪的研制[J].分析化学,2008,36(1):127-131.CHENG Yong-qiang,ZHANG Tao,WANG E,et al.Development of intergrated microfluidic chip-basedbioanalyzer with laser-induced fluorescence detection[J].Chinese Journal of Analytical Chemistry,2008,36(1):127-131.(in Chinese)
[6]
CHENG H C,WANG C H,HUANG C F,et al.Microfabrication of microlens arrays by micro dispensing[J].Polymers for Advanced Technologys,2010,21(9):632-639.
[7]
LUO C W,CHIANG Y C,CHENG H C,et al.A noveland rapid fabrication for microlens arrays usingmicroinjection molding[J].Polymer Engineering andScience,2011,51(2):391-402.
[8]
HUANG P H,YANG S Y.Complete reversal imprintingfor fabricating microlens arrays with faithful shapereplication[J].Journal of Vacuum Science andTechnology:B,2009,27(6):2781-2785.
[9]
MIRKHALAF M,TOR S B.Fabrication of a stand-alonepolymer microlens:design of molding apparatus,simulation and experimental results[J].Journal of Micro-Mechanics and Micro-Engineering,2009,19(9):145-148.
WU Jian,YU Kuan-xin,CHEN Tao,et al.Manufactureof optic micro-lens generated on needing positions and itsapplications on biochips[C]∥The 6th InternationalSymposium on Advanced Optical Manufacturing andTesting Technologies(AOMATT2012).New York:Society of Photo-Optical Instrumentation Engineering(SPIE),Procedings of SPIE,2012,8418:8418 OT.1-8418 OT.5
[13]
WU Jian,YU Kuan-xin,CHEN Tao,et al.Optic micro-lens generated on needing positions of micro-detector toflourescent spectrum[C]∥5th International Photonicsand OptoElectronics Meetings(POEM).New York:Optical Scociety of America(OSA),POEM/MP3Technical Digest,2012:MTh4A15.1-MTh4A15.2.
[14]
WU Jian,YANG Yang,YU Kuan-xin,et al.Fluidmechanics principle about manufacture technology ofmicro lens generated on needing positions[C]∥PhotonicsAsia 2012(PA2012).New York:Society of Photo-Optical Instrumentation Engineering(SPIE),Procedingsof SPIE,2012,8557:85572J.1-85572J.6.
[15]
朱克勤,许春晓.黏性流体力学[M].北京:高等教育出版社,2009:17-20.
[16]
宁乔,朱自强,吕旭涛,等.图像法求液滴表面张力和接触角[J].空间科学学报,2008,28(1):74-79.NING Qiao,ZHU Zi-qiang,LYU Xu-tao,et al.Determine the surface tension and contact angle of drop byimage processing method[J].Chinese Journal of SpaceScience,2008,28(1):74-79.(in Chinese)
