Su K C, Ohnaka I, Yamusuchi I, Fukusako T. Mater ResSoc Symp Proc, 1985; 34: 181
[2]
Zhao H D, Liu B C, Liu W Y, Wang D T. Chin J MechEng, 2000; 36: 76(赵海东,柳百成,刘蔚羽,王东涛.机械工程学报,2000;36:76)
[3]
Magnin P, Kurz W. Metall Trans, 1988; 19A: 1955
[4]
Magnin P, Trivedi R. Acta Metall Mater, 1991; 39: 453
[5]
Charbonnier J, Margerie J C. Mem Sci Rev Metall, 1967;64: 345
[6]
Kagawa A, Okamoto T. J Mater Sci, 1987; 22: 643
[7]
Chang S, Stefanescu D M. In: Lesout G, Lacaze J eds.,Advanced Materials Researeh Vols. 4-5: Physical Metal-lurpy of Cast Iron V, Switzerland: SCITEC Publications,1997: 491
[8]
Selig C, Lacaze J. Metall Mater Trans, 2000; 31B: 827
[9]
Jones H, Kurz W. Z Metallkd, 1981; 11: 792
[10]
Guy G, Hren J J. Elements of Physical Metallurgy. 3rdEd, Reading Mass, USA: Addison-Wesley 1974: 366
[11]
Johnson W A, Mehl R F. Trans AIME, 1939; 135: 416
[12]
Kagawa A, Ohta Y. In: Lesout G, Lacaze J eds., Ad-vanced Materials Research Vols. 4-5: Physical Metallurgyof Cast Iron V, Switzerland: SCITEC Publications, 1997,529
[13]
Lacaze J, Castro M, Lesout G. Acta Mater, 1998; 47: 3779
[14]
Kagawa A, Okamoto T. Mater Res Soc Symp Proc, 1985;34: 201
[15]
Krivanek R A, Mobley C E. AFS Trans, 1984; 92: 311
[16]
Stefanescu D M, Kanetkar C S. AFS Trans, 1987; 95: 139
[17]
Upadhya G, Banerjee D K, Stefanescu D M, Hill J L. AFSTrans, 1990; 98: 699
[18]
Nastac L, Stefanescu D M. AFS Trans, 1995; 104: 329
[19]
Nastac L, Stefanescu D M. In: Lesout G, Lacaze J eds.,Advanced Materials Research Vols. 4-5: Physical Metal-lurgy of Cast Iron V, Switzerland: SCITEC Publications,1997: 469
