|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
X65和X80管线钢在高pH值溶液中的应力腐蚀开裂行为及机理
DOI: 10.3724/SP.J.1037.2013.00315, PP. 1590-1596
Keywords: 管线钢,应力腐蚀开裂,高pH值溶液
Abstract:
采用电化学测试和慢应变速率拉伸实验(SSRT)研究了X65和X80管线钢在高pH值溶液中的应力腐蚀开裂(SCC)行为及机理.结果表明,X65钢在高pH值溶液中的开裂方式是沿晶断裂(IGSCC);X80钢在高pH值溶液中的开裂方式是初期裂纹沿晶扩展与后期裂纹穿晶扩展断裂的混合模式,主要表现为穿晶断裂(TGSCC)特征.X80钢在高pH值溶液中的断裂方式与其组织及强度有关,其裂尖pH值降低是发生TGSCC的重要原因.X65钢在高pH值溶液中的SCC机理为阳极溶解(AD)机理;而X80钢为阳极溶解(AD)+氢脆(HE)机理.
| [1] | Zhang G A, Cheng Y F. Corros Sci, 2010; 52: 960
|
| [2] | Mustapha A, Charles E A, Hardie D. Corros Sci, 2012; 54: 5
|
| [3] | Oskuie A A, Shahrabi T, Shahriari A, Saebnoori E. Corros Sci, 2012; 61: 111
|
| [4] | Arafin M A, Szpunar J A. Mater Sci Eng, 2011; A528: 4927
|
| [5] | Kang Y W, Chen W X, Kania R, Boven G V, Worthingham R. Corros Sci, 2011; 53: 968
|
| [6] | Lu B T, Luo J L, Norton P R. Corros Sci, 2010; 52: 1787
|
| [7] | Sadeghi Meresht E, Shahrabi Farahani T, Neshati J. Eng Fail Anal, 2011; 18: 963
|
| [8] | Jack T R, Erno B, Krist K. Corrosion, 2000; 362: 10
|
| [9] | Manfredi C, Otegui J L. Eng Fail Anal, 2002; 9: 495
|
| [10] | Arafin M A, Szpunar J A. Corros Sci, 2009; 51: 119
|
| [11] | Gonzalez—Rodriguez J G, Casales M, Salinas—Bravo V M, Albarran J L,
|
| [12] | Martinez L. Corrosion, 2002; 58: 584
|
| [13] | He D X, Chen W, Luo J L. Corrosion, 2004; 60: 778
|
| [14] | Parkins R N, Blanchard Jr W K, Delanty B S. Corrosion, 1994; 50: 394
|
| [15] | Park J J, Pyun S I, Na K H, Lee S M, Kho Y T. Corrosion, 2002; 58: 329
|
| [16] | Parkins R N. Corrosion, 1987; 43: 130
|
| [17] | Li M C, Cheng Y F. Electrochim Acta, 2008; 53: 2831
|
| [18] | Asahi H, Kushida T, Kimura M, Fukai H, Okano S. Corrosion, 1999; 55: 644
|
| [19] | Dong C F, Li X G, Liu Z Y, Zhang Y R. J Alloys Compd, 2009; 48: 966
|
| [20] | Kwster F, Bohnenkamq K, Engell H J. Werkstoffe Korrosion, 1978; 29: 699
|
| [21] | Wang W, Shan Y, Yang K. Mater Sci Eng, 2009; A502: 38
|
| [22] | Ogundele G I, White W E. Corrosion, 1986; 42: 71
|
| [23] | Lu B T, Song F M, Gao M, Elboujdaini M. Corros Sci, 2010; 52: 4064
|
| [24] | Song F M. Corros Sci, 2009; 51: 2657
|
| [25] | Wang J Q, Atrens A, Cousens D R, Kelly P M, Nockolds C, Bulcock S.Acta Mater, 1998; 46: 5677
|
| [26] | Wang J Q, Atrens A, Cousens D R, Kinaev N. J Mater Sci, 1999; 34: 1721
|
| [27] | Wang J Q, Atrens A, Cousens D R, Nockolds C, Bulcock S. J Mater Sci, 1999; 34: 1711
|
| [28] | Atrens A, Wang J Q, Stiller K, Andren H O. Corros Sci, 2006; 48: 79
|
| [29] | Liang P. PhD Dissertation, University of Science and Technology Beijing, 2008
|
| [30] | (梁平. 北京科技大学博士学位论文, 2008)
|
| [31] | Lu B T, Luo J L. Corrosion, 2006; 62: 129
|
| [32] | Xu C C, Chi L, Hu G, Huang J, Wang Z S. J Chin Soc Corros Prot, 2005; 25: 20
|
| [33] | (许淳淳, 池琳, 胡钢, 黄杰, 王紫色. 中国腐蚀与防护学报, 2005; 25: 20)
|
| [34] | Fang B Y, Wang J Q, Zhu Z Y, Han E H, Ke W. Acta Metall Sin, 2001; 37: 453
|
| [35] | (方丙炎, 王俭秋, 朱自勇, 韩恩厚, 柯伟. 金属学报, 2001; 37: 453)
|
| [36] | Wang Z F, Atrens A. Metall Mater Trans, 1996; 27A: 2686
|
| [37] | Parkins R N. Corrosion, 1996; 52: 363
|
| [38] | Rebak R B, Xia Z, Safruddin R, Szklarska—Smialowska Z. Corrosion, 1996; 52: 396
|
| [39] | Li J, Elboujdaini M, Fang B, Revie R W, Phaneuf M W. Corrosion, 2006; 62: 316
|
| [40] | Lu Z P, Shoji T, Takeda Y, Ito Y, Kai A, Tsuchiya N. Corros Sci, 2008; 50: 625
|
| [41] | Hoffmeister H. Corrosion, 2011; 67: 1
|
| [42] | Ateya B G, Pickering H W. Corros Sci, 1995; 37: 1443
|
| [43] | Chen W, King F, Vokes E. Corrosion, 2002; 58: 267
|
| [44] | Guo H, Li G F, Cai X, Yang W. Acta Metall Sin, 2004; 40: 967
|
| [45] | (郭浩, 李光福, 蔡珣, 杨武. 金属学报, 2004; 40: 967)
|
| [46] | Dmytrakh I M.Strain, 2011; 47: 427
|
| [47] | Tang X, Cheng Y F.Corros Sci, 2011; 53: 2927
|
| [48] | Wang Z F, Atrens A.Metall Mater Trans, 1996; 27A: 2686
|
| [49] | Wang J Q, Atrens A.Corros Sci, 2003; 45: 2199
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
