|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
304不锈钢毛细管/Zr53.5Cu26.5Ni5Al12Ag3块体非晶合金复合材料的制备与性能研究
DOI: 10.11900/0412.1961.2014.00187, PP. 1087-1094
Keywords: ZrCuNiAlAg非晶合金,304不锈钢毛细管,剪切带,加工硬化
Abstract:
采用渗流法成功制备出不同体积分数的304不锈钢毛细管/Zr53.5Cu26.5Ni5Al12Ag3块状非晶复合材料,分析了该复合材料的性能和变形行为.利用万能力学试验机进行性能测试,利用白光干涉轮廓测量仪、X射线三维成像和SEM观察样品表面及断口形貌.结果表明复合材料的塑性得到显著改善,其中毛细管体积分数为34%时,复合材料的压缩应变可达约20%,同时伴有明显的加工硬化现象,其加工硬化量与毛细管含量有关.复合材料以近45°的剪切方式断裂,表面较为平坦,毛细管撕裂与界面脱粘形成裂纹扩展路径.剪切带的数量随毛细管体积分数增加而增加,毛细管包裹的非晶基体发生剪切变形滞后于毛细管外部的基体.
| [1] | Ashby M F, Greer A L. Scr Mater, 2006; 54: 3216
|
| [2] | Gilbert C T, Ritchie R O, Johnson W L. Appl Phys Lett, 1997; 71: 476
|
| [3] | Suzuki K, Kataoka N, Inoue A. Mater Trans JIM, 1990; 31: 743
|
| [4] | Zhu Z W, Zhang H F, Hu Z Q, Zhang W, Inoue A. Scr Mater, 2010; 62: 278
|
| [5] | Chen L Y, Fu Z D, Zhang G Q, Hao X P, Jiang Q K, Wang X D, Cao Q P. Phys Rev Lett, 2008; 100: 075501
|
| [6] | Deng S T, Diao H, Chen Y L. Scr Mater, 2011; 64: 85
|
| [7] | Inoue A, Zhang T, Masumoto T. Mater Trans JIM, 1995; 36: 391
|
| [8] | Deng S T, Zhang H F, Wang A M, Li H, Ding B Z, Hu Z Q. J Alloys Compd, 2008; 406: 182
|
| [9] | Inoue A, Takeuchi A. Acta Mater, 2011; 59: 2243
|
| [10] | Lottler J. Intermetallics, 2003; 11: 529
|
| [11] | Szuecs F, Kim C P, Johnson W L. Acta Mater, 2001; 49: 1507
|
| [12] | Zhang B, Zhao D Q, Pan M X. Phys Rev Lett, 2005; 94: 205502
|
| [13] | Johnson W L. Appl Phys Lett, 1999; 24: 42
|
| [14] | Zhu Z W. PhD Dissertation, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 2009 (朱正旺. 中国科学院金属研究所博士学位论文, 沈阳, 2009)
|
| [15] | Kuhn U, Eckert J, Mattern N, Schultz L. Appl Phys Lett, 2002; 80: 2478
|
| [16] | Fan C, Ott R T, Hufnagel T C. Appl Phys Lett, 2002; 81: 1020
|
| [17] | Bian Z, Kato H, Qin C, Zhang W, Inoue A. Acta Mater, 2005; 53: 2037
|
| [18] | Dong W B, Zhang H F, Sun W S, Wang A M, Li H, Hu Z Q. J Mater Res, 2006; 21: 1490
|
| [19] | Hui X, Dong W, Chen G L. Acta Mater, 2007; 55: 907
|
| [20] | Hofmann D C, Suh J Y, Wiest A. Nature, 2008; 451: 1085
|
| [21] | Dandliker R B. PhD Dissertation, California Institute of Technology, Pasadena, 1998
|
| [22] | Fan C, Li L, Kelskes J, Liu C T. Phys Rev Lett, 2006; 96: 145506
|
| [23] | Kim C P. PhD Dissertation, California Institute of Technology, Pasadena, 2001
|
| [24] | Conner R D. PhD Dissertation, California Institute of Technology, Pasadena, 1998
|
| [25] | Lee S Y. PhD Dissertation, California Institute of Technology, Pasadena, 2007
|
| [26] | Mathaudhu S N. PhD Dissertation, Texas A&M University, College station, 2006
|
| [27] | Wang G. PhD Dissertation, The University of Tennessee, Knoxiville, 2006
|
| [28] | Hofmann D C. PhD Dissertation, California Institute of Technology, Pasadena, 2009
|
| [29] | Deng S T. PhD Dissertation, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 2010 (邓胜涛. 中国科学院金属研究所博士学位论文, 沈阳, 2010)
|
| [30] | Sun Y, PhD Dissertation, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 2010 (孙 羽. 中国科学院金属研究所博士学位论文, 沈阳, 2010)
|
| [31] | Zheng Q, Cheng S, Strader J H, Ma E, Xu J. Scr Mater, 2007; 56: 161
|
| [32] | Park E S, Lee J Y, Kim D H, Gebert A, Schultz L. J Appl Phys, 2008; 104: 023520
|
| [33] | Lee C J, Huang J C, Nieh T G. Appl Phys Lett, 2007; 91: 161963
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
