全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
电网技术  2012 

方家山核电工程辅助变压器电压不平衡的分析与对策

, PP. 264-270

Keywords: 核电厂,变压器,能量法,不平衡电容,不平衡电压,高阻接地,Matlab

Full-Text   Cite this paper   Add to My Lib

Abstract:

为分析辅助变压器空载运行电压不平衡的现象,首先应用能量法将变压器各绕组的径向分布电容参数等效折算为各绕组端部和端部间的集中电容参数,发现由于变压器平衡绕组的C相直接接地,导致变压器低压侧三相对地电容不平衡,并且低压绕组与平衡绕组的互电容也不平衡。然后,应用Matlab建立了考虑集中电容参数的变压器空载电路模型,并进行空载合闸仿真试验,仿真试验结果表明变压器三相对地电压严重不平衡。最后,给出了解决电压不平衡问题的技术措施。

References

[1]  要焕年,曹梅月.电缆网络的中性点接地方式问题[J].电网技术,2003,27(2):84-89.Yao Huannian,Cao Meiyue.On neutral grounding modes of cable network[J].Power System Technology,2003,27(2):84-89(in Chinese).
[2]  刘明岩.配电网中性点接地方式的选择[J].电网技术,2004,28(16):86-89.Liu Mingyan.Selection of neutral grounding modes in power distribution network [J].Power System Technology,2004,28(16):86-89(in Chinese).
[3]  许颖.对消弧线圈“消除弧光接地过电压”的异议[J].电网技术,2002,26(10):75-77.Xu Ying.Objection to “elimination of arcing ground over-voltage” by arc quenching coil[J].Power System Technology,2002,26(10):75-77(in Chinese).
[4]  戴克铭.配电系统中性点接地方式的分析[J].电网技术,2000,24(10):52-55.Dai Keming.Analysis on neutral grounding of distribution system [J].Power System Technology,2000,24(10):52-55(in Chinese).
[5]  张圣建,平绍勋.高电阻与消弧线圈并联的接地方式[J].高电压技术,2006,32(2):117-118. Zhang Shengjian,Ping Shaoxun.High resistance in parallel with the arc suppression coil grounding[J].High Voltage Engineering,2006,32(2):117-118(in Chinese).
[6]  陈维江,蔡国雄,蔡雅萍,等.10 kV配电网中性点经消弧线圈并联电阻接地方式[J].电网技术,2004,28(24):56-60.Chen Weijiang,Cai Guoxiong,Cai Yaping,et al.Neutral grounding mode in 10 kV distribution network via peterson coil with parallel resistance[J].Power System Technology,2004,28(24):56-60(in Chinese).
[7]  法国核岛设备设计和建造规则协会.RCC-E 2002 压水堆核电站核岛电气设备设计和建造规则[S].法国:核岛设备设计和建造规则协会,2002.
[8]  董景义,段玉柱,张贤国,等.平衡绕组在变压器中的作用及接线方式浅述[J].变压器,2009,46(12):20-23.Dong Jingyi,Duan Yuzhu,Zhang Xianguo,et al.Brief discussion on function and connection mode of balancing winding in transformer [J].Transformer,2009,46 (12):20-23(in Chinese).
[9]  白国兴.变压器绕组径向几何电容的测量与估算[J].变压器,2007,33(11):32-36.Bai Guoxing.Measurement and calculation of radial capacitance of transformer winding[J].Transformer,2007,33(11):32-36(in Chinese).
[10]  尹克宁.变压器设计原理[M].北京:中国电力出版社,2003:103-105.
[11]  杜志叶,阮江军,王伟刚.应用Matlab/Simulink仿真研究铁磁谐振[J].高电压技术,2004,30(9):31-40.Du Zhiye,Ruan Jiangjun,Wang Weigang.Research of rerroresonance simulation using Matlab/Simulink[J].High Voltage Engineering,2004,30(9):31-40(in Chinese).
[12]  周承鸣,李健明.双绕组变压器电容参数的研究及仿真计算[J].高压电器,2010,46(3):45-52.Zhou Chengming,Li Jianming.Research and simulation calculation of double-coil transformer distributed capacitance parameters [J].High Voltage Electrical Appliances,2010,46(3):45-52(in Chinese).
[13]  核工业第二研究设计院.EJ/T 1134—2001 压水堆核电厂厂用电系统设计准则[S].北京:核工业标准化研究所,2011.
[14]  平绍勋,周玉芳.高电阻接地的特点和应用[J].高电压技术,2007,33(11):245-248.Ping Shaoxun,Zhou Yufang.Application and features of high resistance grounding [J].High Voltage Engineering,2007,33(11):245-248(in Chinese).
[15]  中国电力科学研究院.DL/T 620—1997 交流电气装置的过电压保护和绝缘配合[S].北京:中国电力出版社,1997.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133