Kumano A. An experimental and analytical investigation of the response of rock to impact loading[D]. California: University California, Berkeley, 1980.
[2]
Sheppard M C, Lesage M. The forces at the teeth of a drilling rollercone bit: Theory and experiment[C]// SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 1988.
[3]
Kellogg C G. Vertical earth loads on buried engineered works[J]. Journal of geotechnical engineering, 1993, 119(3): 487-506.
[4]
Crochet M J, Davies A R, Walters K. Numerical simulation of nonnewtonian flow[M]. Amsterdam: Elsevier, 1984.
[5]
曾聪, 马保松, 刘厚平. 水平定向钻穿越施工中钻井液渗透对孔壁塑 性半径的影响[J]. 中国石油大学学报: 自然科学版, 2013, 37(2): 57-61. Zeng Cong, Ma Baosong, Liu Houping. Effect of drilling fluid penetration on plastic radius of horizontal directional drilling borehole[J]. Journal of China University of Petroleum: Edition of Natural Science, 2013, 37(2): 57-61.
[6]
高雪林, 叶桦, 任峥峥, 等.水平定向钻的轨迹自动纠偏方法[J].中南大 学学报:自然科学版, 2013, 44(2): 298-302. Gao Xuelin, Ye Hua, Ren Zhengzheng, et al. Automatic trajectory correction of horizontal directional drilling[J]. Journal of Central South University: Science and Technology, 2013, 44(2): 298-302.
[7]
闫相祯, 丁鹏, 杨秀娟. 水平定向钻技术在管道穿越工程中的应用研 究[J]. 石油学报, 2008, 29(2): 292-295. Yan Xiangzhen, Ding Peng, Yang Xiujuan. Research on applying horizontal directional drilling technology to pipeline crossing project[J]. Acta Petrolei Sinica, 2008, 29(2): 292-295.
[8]
徐国华, 褚学宁, 张在房. 水平定向钻钻架有限元建模与分析[J]. 计算 机仿真, 2007, 24(2): 322-325. Xu Guohua, Chu Xuning, Zhang Zaifang. Finite element modeling and analysis for drilling frame of horizontal directional drill[J]. Computer Simulation, 2007, 24(2): 322-325.
[9]
刘清友, 王国荣, 牛再举. 盘式单牙轮钻头破岩机理仿真研究[J]. 四川 大学学报: 工程科学版, 2003, 35(5): 12-15. Liu Qingyou, Wang Guorong, Niu Zaiju. Simulation study the rockbreaking mechanism on dise one-cone bit[J]. Journal of Sichuan Univesity: Engineering Science Edition, 2003, 35(5): 12-15.
[10]
祝效华, 罗衡, 贾彦杰. 考虑岩石疲劳损伤的空气冲旋钻井破岩数值 模拟研究[J]. 岩石力学与工程学报, 2012, 31(4): 754-761. Zhu Xiaohua, Luo Heng, Jia Yanjie. Numerical analysis of air hammer bit drilling based on rock fatigue model[J]. Journal of Rock Mechanics and Engineeing, 2012, 31(4): 754-761.
[11]
陆波. 牙轮钻头与岩石互作用下系统纵向振动研究[D]. 重庆: 重庆 大学, 2006. Lu Bo. The research of the longitudinal vibration in cone bits-rock system[D]. Chongqing: Chongqing University, 2006.
[12]
费康. ABAQUS在岩土工程中的应用[M]. 北京:中国水利水电出版 社, 2010. Fei Kang, Geotechnic engineering in abaqus[M]. Beijing: China Water Power Press, 2010.
[13]
Forrestal M J, Tzou D Y. A spherical cavity-expansion penetration model for concrete targets[J]. International Journal of Solids and Structures, 1997, 34(31): 4127-4146.
[14]
Lueke J S, Ariaratnam S T. Surface heave mechanisms in horizon tal directional drilling[J]. Journal of Constructi on Engineering and Management, 2005, 131(5): 540-547.
[15]
吴泽兵, 刘清友. 盘式钻头与岩石互作用计算机仿真[J]. 西南石油学 院学报, 1998, 20(1): 72-74. Wu Zebing, Liu Qingyou. Computer simulation of interaction between disc drill and rock[J]. Journal Southwest Petroleum University, 1998, 20(1):72-74.
[16]
黄志强, 范永涛, 魏振强, 等. 冲旋钻头破岩机理仿真研究[J]. 西南石 油大学学报: 自然科学版, 2010, 32(1): 148-150. Huang Zhiqiang, Fan Yongtao, Wei Zhenqiang, et al. Emulation study on rock-breaking mechanism of percussion-rotary bit[J]. Journal Southwest Petroleum University: Science and Technology Edition, 2010, 32(1): 148-150.
