ACI Committee 374. Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads(ACI 374.2R-13)[R]. USA Farmington Hill MI48331:American Concrete Institute, 2013.
[2]
SEAOC Vision 2000 Committee. Performance-based seismic engineering of building[J]. California, USA:Structural Engineers Association of California, Sacramento, CA, 1995.
[3]
Priestley M J N, Calvi G M, Kowalsky M J. Dispalcement-based seismic design of structures[M]. Pravia, ITALY:Iuss Press, 2007.
[4]
Applied Technology Council. Seismic retrofitting guidelines for highway bridges.[R].USA Redwood City Calif.:Applied Technology Council, 1983.
[5]
GB 50010-2010混凝土结构设计规范[S]. GB 50010-2010 Code for Design of Concrete Structures[S].(in Chinese)
[6]
Applied Technology Council. Improved seismic design criteria for california bridges:provisional recommendations[R]. USA Redwood City Calif.:Applied Technology Council, 1996.
[7]
Priestley M J N, Verma R, Xiao Y. Seismic shear strength of reinforced concrete columns[J]. Journal of Structural Engineering, 1994, 120(8):2310-2329.
[8]
Kowalsky M J, Priestley M J N. Improved analytical model for shear strength of circular reinforced concrete columns in seismic regions[J]. ACI Structural Journal, 2000, 97(3):388-396.
[9]
Ascheim M, Moehle J P. Shear strength and deformability of RC bridge columns subjected to inelastic cyclic displacements[R]. America:University of California at Berkeley, 1992.
[10]
CALTRANS 1.3. Caltrans Seismic Design Criteria version 1.3[S].
[11]
Dutta A, Mander J B. Capacity design and fatigue analysis of confined concrete columns[R]. America:US Multidisciplinary Center for Earthquake Engineering Research(MCEER), 1998.
[12]
Kawashima K, Koyama T. Effect of number of loading cycles on dynamic characteristics of reinforced concrete bridge pier columns[J]. Proceedings of the Japan Society of Civil Engineers, Structural Eng./Earthquake Eng, 1988, 5(1):183s-191s.
[13]
Pujol S, Sozen M A, Ramirez J A. Displacement history effects on drift capacity of reinforced concrete columns[J]. ACI Structural Journal, 2006, 103(2):253-262.
[14]
Orozco G L, Ashford S A. Characterization of large velocity pulses on reinforced concrete bridge columns[R]. America:Pacific Earthquake Engineering Research Center, College of Engineering, University of California, 2002.
[15]
GB50011-2010建筑抗震设计规范[S]. GB50011-2010 Code for Seismic Design of Buildings[S].(in Chinese)
[16]
Lu Z Q, Chen J K. Aseismic behavior of RC and SRC short columns[C]//Concrete Shear in Earthquake. London and New York:Elsevier Applied Science, 1992.
[17]
Eurocode 8. Design of Structures for Earthquake Resistance-Part 3:Assessment and Retrofitting of Buildings[S]. 2005.
[18]
Mander J B, Priestley M J N, Park R. Theoretical stress-strain model for confined concrete[J]. Journal of Structural Engineering, 1988, 114(8):1804-1826.
[19]
Mazzoni S, McKenna F, Scott M H, et al. OpenSees command language manual[M]. Pacific Earthquake Engineering Research(PEER) Center, 2006.
[20]
Zhao J, Sritharan S. Modeling of strain penetration effects in fiber-based analysis of reinforced concrete structures concrete structures[J]. ACI Structural Journal, 2007, 104(2):133-141.
[21]
Montejo L A, Kowalsky M J. CUMBIA-Set of codes for the analysis of reinforced concrete members[R]. America:North Carolina State University, 2007.
