蔡克铨, 黄彦智, 翁崇兴. 双管式挫屈束制(屈曲约束)支撑之耐震行为与应用[J]. 建筑钢结构进展, 2005, 7(3):1-8. CAI Kequan, HUANG Yanzhi, WENG Chongxin. Seismic performance and applications of double-tube buckling restrained braces[J]. Progress inSteel Building Structures, 2005, 7(3):1-8.(in Chinese)
[2]
李国强, 胡宝琳. 屈曲约束支撑滞回曲线模型和刚度方程的建立[J]. 地震工程与工程振动, 2007, 27(2):26-31. LI Guoqiang, HU Baolin. Establishing of hysteresis curve model and stiffness formula for bucking-restrained brace[J]. Earthquake Engineering and Engineering Dynamics, 2007, 27(2):26-31.(in Chinese)
[3]
李国强, 胡宝琳, 孙飞飞, 等. 国产TJI型屈曲约束支撑的研制与试验[J]. 同济大学学报:自然科学版, 2011, 39(5):631-636. LI Guoqiang, HU Baolin, SUN Feifei, et al. Development and experimental study on domestic TJI buck-restrained brace[J]. Journal of Tongji University:Nature Science, 2011, 39(5):631-636.(in Chinese)
[4]
胡宝琳. 屈曲约束支撑框架抗震设计的理论和试验研究[D]. 上海:同济大学, 2008. HU Baolin. Thepritical and experimental research on seismic design of buckling-restrained brace[D]. Shanghai:Tongji University, 2008.(in Chinese)
[5]
郭彦林, 江磊鑫. 型钢组合装配式防屈曲支撑性能及设计方法研究[J]. 建筑结构, 2010, 40(1):30-37. GUO Yanlin, WANG Leixin. Behavior and application of buckling-restrained braces assembled with section steels[J].Journal of Building Structures, 2010, 40(1):30-37.(in Chinese)
[6]
GB50011-2010建筑抗震设计规范[S]. 北京:中国建筑工业出版社, 2010. GB50011-2010 Code for Seismic Design of Buildings[S]. Beijing:Building Industry Press of China, 2010.(in Chinese)
[7]
ASIC. Seismic Provisions for Structural Steel Building[S]. American Institute of Steel Construction. Chicago, Illinois, 2005.
[8]
周福霖. 工程结构减震控制[M]. 北京:地震出版社, 1997. ZHOU Fulin. Vibration control of engineering structure[M]. Beijing:Seismological Press, 1997.(in Chinese)
[9]
Watanabe A,Hitomi Y, Saeki E, et al. Properties of brace encased in buckling-restraining concrete and steel tube[C]//Proceedings of Ninth World Conference on Earthquake Engineering, 1988, 4:719-724.
[10]
Iwata M, Kato T, Wada A. Buckling-restrained braces as hysteretic dampers[J]. Behaviour of Steel Structures in Seismic Areas, STESSA, 2000, 2000:33-38.
[11]
Black C J, Makris N, Aiken I D. Component testing, stability analysis, and characterization of buckling-restrained unbonded braces(TM)[M]. Pacific Earthquake Engineering Research Center, 2002.
[12]
Black C J, Makris N, Aiken I D. Component testing, seismic evaluation and characterization of buckling-restrained braces[J]. Journal of Structural Engineering, 2004, 130(6):880-894.
