全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

液力减速器制动性能及其两相流分析方法研究

Keywords: 液力减速器,两相流,制动性能,充液率

Full-Text   Cite this paper   Add to My Lib

Abstract:

为对车用液力减速器在制动过程中制动性能进行准确预测,在全充液的单一液相流动到不充液的单一气相流动的整个工作过程中,对于无内环的液力元件采用混合入、出口的边界条件处理方法,对充液率分别为100%、80%、60%、40%及20%时的工况分别进行CFD液力减速器内流场数值模拟,获取不同充液率和不同转速下的制动性能曲线,并得到对应不同工况的速度和压力场分布特性.结果表明,CFD数值模拟可以较为准确地预测制动性能,并且混合入、出口的边界条件处理方法更符合无内环叶轮机械内部的实际流动本质.

References

[1]  谷正气,姜波,何忆斌,等.基于SST湍流模型的超车时汽车外流场变化的仿真分析[J].汽车工程,2007,29(6):494-496,527.Gu Zhengqi, Jiang Bo, He Yibin, et al. Numerical simulation on the change of external flow field during vehicle overtaking based on SST turbulence model[J]. Automotive Engineering, 2007,29(6):494-496,527. (in Chinese)
[2]  荆崇波,胡纪滨,鲁毅飞.车用液力减速器制动性能试验研究[J].汽车技术,2005(12):27-31.Jing Chongbo,Hu Jibing,Lu Yifei. Study on brake performance of automotive hydraulic retarders[J]. Automotive Technology, 2005(12):27-31.(in Chinese)
[3]  王峰.基于流场分析的液力减速器制动性能研究[D].北京:北京理工大学机械与车辆学院,2007.Wang Feng. Study on braking performance of hydraulic retarder based on flow field analysis[D]. Beijing: School of Mechanical Engineering,Beijing Institute of Technology, 2007. (in Chinese)
[4]  陆忠东,吴光强,殷学仙,等.液力变矩器流固耦合研究[J].汽车技术,2009(2):37-41,57.Lu Zhongdong, Wu Guangqiang, Yin Xuexian, et al. Study on fluid solid interaction of torque converter[J]. Automotive Technology, 2009(2):37-41,57. (in Chinese)
[5]  吴军,谷正气,钟志华.SST湍流模型在汽车绕流仿真中的应用[J].汽车工程,2003,25(4):326-329.Wu Jun, Gu Zhengqi, Zhong Zhihua. The application of SST turbulence model in the aerodynamic simulation of the automobile[J]. Automotive Engineering, 2003,25(4):326-329. (in Chinese)

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133