王刚志.内燃机主轴承热弹性流体动力润滑数值分析及试验研究 .天津:天津大学,2007 Wang Gangzhi. Elastohydrodynamic lubrication analysis and experiment study of main journal bearings in IC engines . Tianjin: Tianjin University, 2007. (in Chinese)
[2]
成大先,王德夫,姜勇,等.机械设计手册[M].北京:化学工业出版社,2001. Cheng Daxian, Wang Defu, Jiang Yong, et al. Mechanical design handbook[M]. Beijing: Chemical Industry Press, 2001. (in Chinese)
[3]
Mehenny D S, Taylor C M, Jones G J, et al. The influence of circumferential waviness of the journal on the lubrication of dynamically loaded journal bearing, SAE paper 970216 . : SAE, 1997.
[4]
Vijayaraghavan D, Brewe D E, Keith T G. Effect of out-of-roundness on the performance of a diesel engine connecting-rod Bearing[J]. ASME Journal of Tribology, 1993,115(3):538-543.
[5]
Hargreaver D. Surface waviness effects on the load-carrying capacity of rectangular slide bearings[J]. Wear, 1991,145:137-151.
[6]
Patir N, Chen H S. Application of average flow model to lubrication between rough sliding surface[J]. J Lub Tech Trans ASME Ser F, 1979,101(1):220-230.
[7]
王晓力.计入表面形貌效应的内燃机主轴承热流体动力润滑分析 .北京:清华大学,1999. Wang Xiaoli. Thermal hydrodynamic lubrication analysis of main journal bearings in IC engines considering the surface topography effects . Beijing: Tsinghua University, 1999. (in Chinese)
[8]
崔东辉,徐龙祥.机械加工误差对主动磁悬浮轴承性能的影响[J].机械工程学报,2009,45(6):24-33. Cui Donghui, Xu Longxiang. Influence of error on the performance machining of active magnetic bearing[J]. Chinese Journal of Mechanical Engineering, 2009,45(6):24-33. (in Chinese)
[9]
汪恺,唐保宁.形位公差原理和应用[M].北京:机械工业出版社,1991. Wang Kai, Tang Baoning. Principles and applications of form and position tolerance[M]. Beijing: China Machine Press, 1991. (in Chinese)