Wu J M (吴建民), Xu J W (徐家文), Wu R (吴锐). Investigation of technique property of aluminum alloy electrochemical machining[J]. Journal of Material Engineering (材料工程), 2008, (8): 61-63.
[2]
Zhao C X (赵长喜), Li J X (李继霞). The manufacturing technology for whole wall-plate structures of aircrafts[J]. Aerospace Manufacturing Technology (航天制造技术), 2006, (4): 44-48.
[3]
Xu J W, Yun N Z, Tang Y X, et al. The modeling of NC-electrochemical contour evolution machining using a rotary tool-cathode[J]. Journal of Materials Processing Technology, 2005, 159(2): 272-277.
[4]
Damme S Van, Nelissen G, Van Den B Bossch E, et al. Numerical model for predicting the efficiency behavior during pulsed electrochemical machining of steel in NaNO3[J]. Journal of Applied Electrochemistry, 2006, 36(1):1-10.
[5]
Bejar M A, Gutierrez F. On the determination of current efficiency in electrochemical machining with a variable gap[J]. Journal of Materials Processing Technology, 1993, 37(2): 691-699.
[6]
Haisch T, Mittemeijer E J, Schultze J W. High rate anodic dissolution of 100Cr6 steel in aqueous NaNO3 solution[J]. Journal of Applied Electrochemistry, 2004, 34(10): 997-1005.
[7]
Wang M H, Zhu D. Simulation of fabrication for gas turbine blade turbulated cooling hole in ECM based on FEM[J]. Journal of Materials Processing Technology, 2009, 209(4): 1747-1751.
[8]
Li Z Y (李志永), Zhu D (朱荻). Investigation of cathode designation and technique based on electric field and flow field characteristics for blade electrochemical machining[J]. China Mechanical Engineering (中国机械工程), 2006, 17(14): 1463-1466.
[9]
Wei C J, Xu K Z, Ni J, et al. A finite element based model for electrochemical discharge machining in discharge regime[J]. The International Journal of Advanced Manufacturing Technology, 2011, 54(9/12): 987-995.
[10]
Xu Z Y (徐正扬), Zhu D (朱荻), Shi X C (史先传). The optimization and test of flowing manner of electrolyte for electrochemical machining of engine blades[J]. Journal of Southeast University(Natural Science Edition) (东南大学学报(自然科学版)), 2008, 38(13): 434-438.
[11]
Wu J M (吴建民), Xu J W (徐家文). Numeral simulation of 3D flow field for numeral controlling electrochemical machining of whole blade wheel[J]. China Mechanical Engineering (中国机械工程), 2009, 20(7): 780-783.
[12]
Jiang L M (蒋利民), Huang X M (黄选民), Tian Z Q (田中群), et al. Investigation of microstructure machining on aluminum surface by confined etchant layer technique[J]. Chemical Journal of Chinese Universities (高等学校化学学报), 2006, 27(8): 1540-1544.
[13]
Jiang L M (蒋利民), Cheng Z Y (程泽宇), Du N (杜楠), et al. Electrochemical machining of microstructure array on magnesium alloy surface[J]. Acta Physico-Chimica Sinica (物理化学学报), 2008, 24(7): 1307-1312.
