LIU Li-min.Enhancing the Bearing Capacity of Bored Pile by Improving Roughness of the Hole[J].Architecture Technology,2002,33(3):188-189.
[3]
LEE M H,CHO C H,YOO H K,et al.A Study on the Surface Roughness of Drilled Shaft into Rock in Korea[C]//KGS.Proceedings of the Korean Society of Geotechnical Engineering Conference.Seoul:KGS,2003:431-439.
[4]
ZHANG Yong-xing,RAO Xiao-yu,TANG Shu-ming,et al.Experiment on Shear Strength of Cementation Plane Between Grout and Rock in Prestressed Anchor[J].China Journal of Highway and Transport,2008,21(6):1-6.
[5]
ROWE R K,ARMITAGE H H.Theoretical Solutions for Axial Deformation of Drilled Shafts in Rock[J].Canadian Geotechnical Journal,1987,24(1):114-125.
[6]
HORVATH R G,KENNEY T C,TROW W A.Results of Tests to Determine Shaft Resistance of Rock-socketed Drilled Piers[C]//PELLS P J N.Proceedings of the International Conference on Structural Foundations on Rock.London:Taylor & Francis,1980:349-361.
[7]
HORVATH R G,KENNEY T C,KOZICHI P.Method of Improving the Performance of Drilled Piers in Weak Rock[J].Canadian Geotechnical Journal,1983,20(4):758-772.
[8]
SEIDEL J P,COLLINGWOOD B.A New Socket Roughness Factor for Prediction of Rocket Socket Shaft Resistance[J].Canadian Geotechnical Journal,2001,38(1):138-153.
[9]
KONG K H,KODIKARA J,HAQUE A.Numerical Modelling of the Side Resistance Development of Piles in Mudstone with Direct Use of Sidewall Roughness[J].International Journal of Rock Mechanics and Mining Sciences,2006,43(6):987-995.
WANG Hong-wei,DAI Guo-liang,YE Tao,et al.Test on Bearing Behavior of Long and Large Socketed Pile Pile-base Post-grouting[J].Journal of Architecture and Civil Engineering,2009,26(4):54-58.
[14]
PELLS P J N,ROWE R K,TURNER R M.An Experimental Investigation into Side Shear for Socketed Piles in Sandstone[C]//PELLS P J N.Proceedings of the International Conference on Structural Foundations on Rock.London:Taylor & Francis,1980:291-302.
[15]
ROWE R K,ARMITAGE H H.A Design Method for Drilled Piers in Soft Rock[J].Canadian Geotechnical Journal,1987,24(1):126-142.
[16]
WILLIAMS A F,PELLS P J N,SOURCE U.Side Resistance Rock Sockets in Sandstone,Mudstone and Shale[J].Canadian Geotechnical Journal,1981,18(4):502-513.
[17]
HASSAN K M,O'NEILL M W.Side Load-transfer Mechanisms in Drilled Shaft in Soft Argillaceous Rock[J].Journal of Geotechnical and Geoenvironment Engineering,1997,123(2):145-152.
[18]
LIU Li-min,HE Shui-lian.Effect of Hole Side Roughness on the Bearing Capacity of Rock-socked Pile[J].Building Structure,2000,30(11):10-12.
