闫云飞,张智恩,张力,等．太阳能利用技术及其应用[J]．太阳能学报,2012,33(S1)：47-56． Yan Yunfei,Zhang Zhien,Zhang Li,et al．Application and utilization technology of solar energy[J]．Acta Energiae Solaris Sinica,2012,33(S1)：47-56(in Chinese)．
[2]
许佩佩,刘建忠,周俊虎,等．塔式太阳能热发电接收器的研究进展[J]．热能动力工程,2014,29(3)：223-230+338． Xu Peipei,Liu Jianzhong,Zhou Junhu,et al．Advances in the study of tower type solar energy thermal power generation receivers[J]．Journal of Engineering for Thermal Energy and Power,2014,29(3)：223-230+ 338(in Chinese)．
[3]
杨敏林,杨晓西,林汝谋,等．太阳能热发电技术与系统[J]．热能动力工程,2008,23(3)：221-229． Yang Minlin,Yang Xiaoxi,Lin Rumou,et al．Solar energy-based thermal power generation technologies and their systems[J]．Journal of Engineering for Thermal Energy and Power,2008,23(3)：221-229(in Chinese)．
[4]
Litwin R Z．Receiver system：lessons learned from solar two[R]． Albuquerque,New Mexico 87185 and Livermore, Califomia 94550：Sandia National Laboratories, 2002．
[5]
余强,徐二树,常春,等．塔式太阳能电站定日镜场的建模与仿真[J]．中国电机工程学报,2012,32(23)：90-97+155． Yu Qiang,Xu Ershu,Chang Chun,et al．Modeling and simulation of the heliostat field of solar tower power plant[J]．Proceedings of the CSEE,2012,32(23)：90-97+155(in Chinese)．
[6]
Xu E,Yu Q,Wang Z,et al．Modeling and simulation of 1 MW DAHAN solar thermal power tower plant [J]．Renewable Energy,2011,36(2)：848-857．
[7]
徐二树,余强,杨志平,等．塔式太阳能热发电腔式吸热器动态仿真模型[J]．中国电机工程学报,2010,30(32)：115-121． Xu Ershu,Yu Qiang,Yang Zhiping,et al．Solar thermal power tower cavity receiver dynamic simulation model [J]．Proceedings of the CSEE,2010,30(32)：115-121(in Chinese)．
[8]
高维,徐蕙,徐二树,等．塔式太阳能热发电吸热器运行安全性研究[J]．中国电机工程学报,2013,33(2)：92-97． Gao Wei,Xu Hui,Xu Ershu,et al．Research on operation security of solar thermal tower power plant receiver [J]．Proceedings of the CSEE,2013,33(2)：92-97 (in Chinese)．
[9]
Camacho E F,Berenguel M,Gallego A J．Control of thermal solar energy plants[J]．Journal of Process Control 2014,24(2)：332-340．
[10]
Besarati S M,Yogi Goswami D,Stefanakos E K．Optimal heliostat aiming strategy for uniform distribution of heat flux on the receiver of a solar power tower plant [J]．Energy Conversion and Management,2014,84：234-243．
[11]
Salomé A,Chhel F,Flamant G,et al．Control of the flux distribution on a solar tower receiver using an optimized aiming point strategy：Application to THEMIS solar tower[J]．Solar Energy,2013,94：352-366．
[12]
Garc a-Mart n F J,Berenguel M,Valverde A,et al．Heuristic knowledge-based heliostat field control for the optimization of the temperature distribution in a volumetric receiver[J]．Solar Energy,1999,66(5)：355-369．
[13]
Baker A,Faas S,Radosevich L,et al．US-Spain joint evaluation of the solar one and CESA-1 receiver and storage systems[R]．Livermore,CA, Technical Report No SAND88-8262：Sandia National Laboratories, 1989．
[14]
Hirt C W,Nichols B D．Volume of fluid (VOF) method for the dynamics of free boundaries[J]．Journal of Computational Physics, 1981,39(1)：201-225．
[15]
Lee W H．A pressure iteration scheme for two-phase flow modeling[M]//T．N．Veziroglu (Ed．),Multiphase Transport：Fundamentals,Reactor Safety,Application,Washington,DC：Hemisphere Publishing,1980,407-432．
[16]
Badescu V．Theoretical derivation of heliostat tracking errors distribution[J]．Solar Energy, 2008,82(12)：1192-1197．
[17]
Muftuoglu A,Bilgen E．Heat transfer in inclined rectangular receivers for concentrated solar radiation [J]．International Communications in Heat and Mass Transfer,2008,35(5)：551-556．
[18]
Luo Y,Du X Z,Yang L J,et al．Numerical simulation on the performance of a combination of external and cavity absorber for solar power plant[J]．Energy Procedia,2010,30(29)：107-114．
[19]
王建楠,李鑫,常春．太阳能塔式热发电站熔融盐吸热器过热故障的影响因素分析[J]．中国电机工程学报,2010,30(29)：107-114． Wang Jiannan,Li Xin,Chang Chun．Analysis of the influence factors on the overheat of molten salt receiver in solar tower power plants[J]．Proceedings of the CSEE,2010,30(29)：107-114(in Chinese)．
[20]
Vant-Hull L L．The role of “Allowable flux density” in the design and operation of molten-salt solar central receivers[J]．Journal of Solar Energy Engineering,2002,124(2)：165-169．
[21]
Liao Z,Li X,Xu C,et al．Allowable flux density on a solar central receiver[J]．Renewable Energy,2014,62：747-753．
[22]
Irfan M A,Chapman W．Thermal stresses in radiant tubes due to axial,circumferential and radial temperature distributions[J]．Applied Thermal Engineering,2009,29(10)：1913-1920．
[23]
Irfan M,Chapman W．Thermal stresses in radiant tubes：A comparison between recuperative and regenerative systems[J]．Applied Thermal Engineering,2010,30(2)：196-200．
