[1] | Mishra S,Coapilen J,Tomizuka M. Precision positioning of wafer scanners - segmented iterative learning control for nonrepetitive disturbances[J]. IEEE Control Systems Magazine, 2007,27(4):20-25.
|
[2] | Huang W,Liu C,Hsu P,et al. Precision control and compensation of servomotors and machine tools via the disturbance observer[J]. IEEE Transactions on Industrial Electronics, 2010,57(1):420-429.
|
[3] | 王昊,张之敬,刘成颖. 永磁直线同步电机纵向端部效应补偿方法[J]. 中国电机工程学报, 2010,30(36):46-52. Wang Hao,Zhang Zhijing,Liu Chengying.Compensation methods of longitudinal end effects in permanent-magnet linear synchronous motor[J].Proceedings of the CSEE,2010,30(36)
|
[4] | Ogata K. Modern control engineering[M]. 4 ed.Beijing:Tsinghua University Press, 2006:705-709.
|
[5] | Masory O. Improving controuring accuracy of NC/CNC systems with additional velocity feed forward loop [J]. Journal of Engineering for Industry, 1986,108(3):227-230.
|
[6] | Chen C S,Lee A C. New direct velocity and acceleration feedforward tracking control in a retrofitted milling machine[J]. International Journal of The Japan Society for Precision Engineering, 1999,33(3):178-184.
|
[7] | Tomizuka M. Zero phase error tracking algorithm for digital-control[J]. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 1987,109(1):65-68.
|
[8] | Kempf C J,Kobayashi S. Disturbance observer and feedforward design for a high-speed direct-drive positioning table[J]. IEEE Transactions on Control Systems Technology, 1999,7(5):513-526.
|
[9] | Lee H S,Tomizuka M. Robust motion controller design for high-accuracy positioning systems[J]. IEEE Transactions on Industrial Electronics, 1996,43(1):48-55.
|
[10] | 赵希梅,郭庆鼎. 基于ZPETC和DOB的永磁直线同步电机的鲁棒跟踪控制[J]. 中国电机工程学报, 2007,27(30):60-63. Zhao Ximei,Guo Qingding.Robust tracking control based on ZPETC and DOB for permanent magnet linear synchronous motor[J].Proceedings of the CSEE,2007,27(30)
|
[11] | Tsao T C,Tomizuka M. Adaptive zero phase error tracking algorithm for digital control[J]. Journal of Dynamic System, Measurement and Control,1987,109(4):349-354.
|
[12] | Kobayashi H,Katsura S,Ohnishi K. An analysis of parameter variations of disturbance observer for motion control[J]. IEEE Transactions on Industrial Electronics, 2007,54(6):3413-3421.
|
[13] | 孟凡军,徐国柱. 基于卡尔曼滤波器的扰动补偿控制研究[J]. 航空科学技术, 2010(3):39-41. Meng Fanjun,Xu Guozhu.Research of disturbance compensator based on kalman filter[J].Aeronautical Science and Technology,2010(3)
|
[14] | Wang Y,Xiong Z H,Ding H. Robust controller based on friction compensation and disturbance observer for a motion platform driven by a linear motor[J]. Proceedings of The Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, 2006,220(I1):33-39.
|
[15] | Tan K K,Lee T H,Dou H F,et al. Precision motion control with disturbance observer for pulsewidth- modulated-driven permanent-magnet linear motors [J]. IEEE Transactions on Magnetics, 2003,39(3):1813-1818.
|
[16] | Yan M,Huang K,Shiu Y,et al. Disturbance observer and adaptive controller design for a linear-motor-driven table system[J]. International Journal of Advanced Manufacturing Technology, 2007,35(3-4):408-415.
|
[17] | Li S H,Liu Z G. Adaptive speed control for permanent- magnet synchronous motor system with variations of load inertia[J]. IEEE Transactions on Industrial Electronics, 2009,56(8):3050-3059.
|
[18] | Umeno T,Hori Y. Robust speed control of DC servomotors using modern 2 degrees-of-freedom controller-design[J]. IEEE Transactions on Industrial Electronics, 1991,38(5):363-368.
|
[19] | Schrijver E,van Dijk J. Disturbance observers for rigid mechanical systems:equivalence,stability,and design[J]. Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 2002,124(4):539-548.
|
[20] | Godler I,Honda H,Ohnishi K. Design guidelines for disturbance observer's filter in discrete time[C]. 7th International Workshop on Advanced Motion Control.Maribor, Slovenia:IEEE, 2002:390-395.
|
[21] | Yamada K,Komada S,Ishida M,et al. Characteristics of servo system using high order disturbance observer[C]// Decision and Control,1996,Proceedings of the 35th IEEE. Kobe, Japan:IEEE,1996:3252-3257.
|