刘颖,周波,李帅,等.转子磁钢表贴式永磁同步电机转子初始位置检测[J].中国电机工程学报,2011,31(48):48-54. LiuYing,Zhou Bo,Li Shuai,et al.Initial rotor position detection of surface mounted permanent magnet synchronous motor[J].Proceedings of the CSEE,2011,31(48):48-54(in Chinese).
[2]
贾洪平,贺益康.基于高频注入法的永磁同步电动机转子初始位置检测研究[J].中国电机工程学报,2007,25(15):15-20. Jia Hongping,He Yikang.Study on inspection of the initial rotor position of a PMSM based on high-frequency signal injection[J].Proceedings of the CSEE,2007,25(15):15-20(in Chinese).
[3]
Jeong Y,Lorenz R D,Jahns T M,et al.Initial rotor position estimation of an interior permanent-magnet synchronous machine using carrier-frequency injection methods[J].IEEE Transactions on Industry Applications,2005,1(41):38-45.
[4]
万山明,吴芳,黄声华.基于高频电压信号注入的永磁同步电机转子初始位置估计[J].中国电机工程学报,2008,28(33):82-86. Wan Shanming,Wu Fang,Huang Shenghua.Initial rotor position estimation of permanent magnet synchronous motor based on high frequency voltage signal injection method[J].Proceedings of the CSEE,2008,28(33):82-86(in Chinese).
[5]
Yoon Y D,Sul S K,Morimoto S,et al.High bandwidth sensorless algorithm for AC machines based on square-wave type voltage injection[C]//IEEE ECCE.San Jose,CA,USA:IEEE,2009:2123-2130.
[6]
Andreescu G D,Schlezinger C.Enhancement sensorless control system for PMSM drives using square-wave signal injection[C]//International Symposium on Power Electronics and Electrical Drives.Pisa,Italy:IEEE,2010:1508-1511.
[7]
Zhu Z Q,Pang Y,Howe D,et al.Analysis of electromagnetic performance of flux-switching permanent magnet machines by non-linear adaptive lumped parameter magnetic circuit model[J].IEEE Transactions on Magnetics,2005,41(11):4277-4287.
[8]
Zhu Z Q,Chen J T.Advanced flux-switching permanent magnet brushless machines[J].IEEE Transactions on Magnetics,2010,46(6):1447-1453.
[9]
Chen J T,Zhu Z Q.Winding configurations and optimal stator and rotor pole combination of flux-switching PM brushless AC machines[J].IEEE Transactions on Energy Conversion,2010,25(2):293-302.
[10]
Owen R L,Zhu Z Q,Jewell G W.Hybrid-excited flux switching permanent magnet machines with iron flux bridges[J].IEEE Transactions on Magnetics,2010,46(6):1726-1729.
[11]
Jia Hongyun,Cheng Ming,Hua Wei,et al.A new stator-flux orientation strategy for flux switching permanent motor drive based on voltage space-vector[C]// International Conference on Electrical Machines and Systems.Wuhan,China:IEEE,2008:3032-3036.
[12]
Wang K,Shen J X,Dong S Z.Sensorless control and initial position estimation of permanent magnet flux switching motor[C]//Proceeding of International Conference on Electrical Machines and Systems.Seoul,Korea:IEEE,2007:487-491.
[13]
Gong Liming,Zhu Z Q.Saliency investigation of PM brushless AC motors for high-frequency carrier signal injection-based sensorless Control[C]//Proceedings of the 17th International Conference on Automation & Computing.University of Huddersfield,UK:IEEE,2011:86-91.
[14]
梁艳,李永东.无传感器永磁同步电机矢量控制中转子初始位置的估算方法[J].电工技术杂志,2003(2):10-13. Liang Yan,Li Yongdong.Initial rotor position Estimation for the sensorless vector control of PMSMs[J].Electrotechnical Journal,2003(2):10-13(in Chinese).
[15]
Nakashima S,Inagaki Y,Miki I.Sensorless initial rotor position estimation of surface permanent-magnet synchronous motor[J].IEEE Transactions on Industry Applications,2000,36(6):1598-1603.
[16]
韦鲲,金辛海.表面式永磁同步电机初始转子位置估计技术[J].中国电机工程学报,2006,26(22):105-109. Wei Kun,Jin Xinhai.Initial rotor position estimate technique on surface mounted permanent magnet synchronous motor[J].Proceedings of the CSEE,2006,26(22):105-109(in Chinese).
[17]
Kondo S,Takahashi A,Nishida T.Armature current locus-based estimation method of rotor position of permanent magnet synchronous motor without mechanical sensor[C]//IEEE-IAS Annual Meeting.Orlando,USA:IEEE,1995:55-60.
[18]
Jeong Y,Lorenz R D,Jahns T M,et al.Initial rotor position estimation of an interior permanent magnet synchronous machine using carrier-frequency injection methods[C]//IEEE IEMDC.Madison,USA:IEEE,2003:1218-1223.
[19]
Ha J I,Ide K,Sawa T,et al.Sensorless position control and initial position estimation of an interior permanent magnet motor[C]//IEEE-IAS Annual Meeting.Chicago,USA:IEEE,2001:2607-2613.
