陈矛章．风扇/压气机技术发展和对今后工作的建议[J]．航空动力学报,2002,17(1)：1-15．Chen Maozhang．Development of fan/compressor techniques and suggestions on further researches[J]．Journal of Aerospace Power,2002,17(1)：1-15(in Chinese)．
[2]
张磊．超高负荷跨音速涡轮气动设计理论及其非定常流动特性研究[D]．北京：中国科学院研究生院,2011．Zhang Lei．Investigation of aerodynamic design method and unsteady flow characteristic of ultra-highly loaded turbine[D]．Beijing：Graduate University of Chinese Academy of Sciences,2011(in Chinese)．
[3]
Moffitt T P,Schum H J,Whitney W J．Performance of a single-stage turbine as affected by variable stator area[C]//AIAA 5th Propulsion Joint Specialist Conference,U.S. Air Force Academy,Colorado,1969：69-525．
[4]
潘波,白创军,赵洪雷,等．变几何涡轮对涡轮气动性能的影响研究[J]．燃气轮机技术,2012,25(3)：40-44．Pan Bo,Bai Chuangjun,Zhao Honglei,et al．Influence of variable geometry turbine on the aerodynamic performance of turbine[J]．Gas Turbine Technology,2012,25(3)：40-44(in Chinese)．
[5]
Huber F W,Branstrom B R,Finke A K,et al．Design and test of a small two stage counter-rotating turbine for rocket engine[C]//AIAA 29th Joint Propulsion Conference and Exhibit,Monterey,USA,1993．
[6]
Haldeman C W,Dunn M G,Abhari R S,et al．Experimental and computational investigation of the time- averaged and time-resolved pressure loading on a vaneless counter-rotating turbine[C]//Proceedings of ASME Turbo Expo 2000：Turbine Technical Conference and Exposition,Munich,Germany,2000．
[7]
Lawlor S P,Steele R C,Baldwin P．Advanced supersonic component engine for military applications[C]// Proceedings of ASME Turbo Expo 2007：Power for Land,Sea and Air,Montreal,Canada,2007．
[8]
钟兢军,黄振宇,杨凌,等．超声速膨胀器设计及其内部流动研究[C]//中国工程热物理学会热机气动热力学学术会议,论文编号：132098,呼和浩特,中国,2013．Zhong Jingjun,Huang Zhenyu,Yang Ling,et al．Research on the design and flow field of supersonic expander[C]//Proceedings of Chinese Society of Engineering Thermophysics Conference on the Heat Engine Aerothermodynamics,paper ID：132098,Hohhot,China,2013(in Chinese)．
[9]
汪维娜,王占学,乔渭阳．单斜面膨胀喷管几何参数对流场和性能的影响[J]．航空动力学报,2006,21(2)：280-284．Wang Weina,Wang Zhanxue,Qiao Weiyang．Investigation of the influence of single expansion ramp nozzle geometric parameters on the flow field and performance[J]．Journal of Aerospace Power,2006,21(2)：280-284(in Chinese)．
[10]
贺旭照,张勇,汪广元,等．高超声速飞行器单壁膨胀喷管的自动优化设计[J]．推进技术,2007,28(2)：148-151．He Xuzhao,Zhang Yong,Wang Guangyuan,et al．Automated design optimization of single expansion ramp nozzle for hypersonic vehicle[J]．Journal of Propulsion Technology,2007,28(2)：148-151(in Chinese)．
[11]
徐华松,谷良贤．高超声速飞行器后体喷管设计[J]．航空动力学报,2007,22(2)：257-260．Xu Huasong,Gu Liangxian．Nozzle afterbody design of hypersonic flight vehicle[J]．Journal of Aerospace Power,2007,22(2)：257-260(in Chinese)．
[12]
谭杰,金捷,杜刚,等．单边膨胀喷管试验和数值模拟[J]．航空动力学报,2011,26(6)：1223-1230．Tan Jie,Jin Jie,Du Gang,et al．Experimental and computational investigation of single-expansion-ramp- nozzle[J]．Journal of Aerospace Power,2011,26(6)：1223-1230(in Chinese)．
[13]
Daniel J D,Lisa W G,Frank W H．A study of the effects of tip clearance in a supersonic turbine[J]．Journal of Turbomachinery,2000,122(4)：674-683．
[14]
Daniel J D,Lisa W G,Frank W H,et al．Unsteady flow in a supersonic turbine with variable specific heats[J]．Journal of Propulsion and Power,2002,18(2)：493-496．
[15]
韩吉昂,严红明,钟兢军,等．旋转冲压压缩转子二维进气流道数值研究[J]．航空动力学报,2008,23(6)：1054-1060．Han Ji’ang,Yan Hongming,Zhong Jingjun,et al．Numerical research of two-dimensional flow-path in ram-rotor[J]．Journal of Aerospace Power,2008,23(6)：1054-1060(in Chinese)．
[16]
韩吉昂,钟兢军,严红明,等．旋转冲压压缩转子三维进气流道数值研究[J]．航空动力学报,2009,24(5)：1079-1088．Han Ji’ang,Zhong Jingjun,Yan Hongming,et al．Numerical research of three dimensional flow-path in a ram-rotor[J]．Journal of Aerospace Power,2009,24(5)：1079-1088(in Chinese)．
[17]
韩吉昂,孙鹏,钟兢军,等．旋转冲压压缩转子中压缩面的数值研究[J]．工程热物理学报,2010,31(2)：227-230．Han Ji’ang,Sun Peng,Zhong Jingjun,et al．Numerical research of compression ramp in a ram-rator[J]．Journal of Engineering Thermophysics,2010,31(2)：227-230(in Chinese)．
[18]
钟兢军,杨凌,严红明,等．隔板截面形状对旋转冲压压缩转子性能的影响[J]．工程热物理学报,2011,32(4)：577-580．Zhong Jingjun,Yang Ling,Yan Hongming,et al．Numerical research of stake wall section shapes on ram-rotor performance[J]．Journal of Engineering Thermophysics,2011,32(4)：577-580(in Chinese)．
[19]
杨凌,钟兢军,韩吉昂,等．关键几何参数对选转冲压压缩转子流场及性能影响研究[J]．工程热物理学报,2012,33(3)：388-392．Yang Ling,Zhong Jingjun,Han Ji’ang,et al．Influence of the two geometric parameters on ram-rotor flow field and performance[J]．Journal of Engineering Thermophysics,2012,33(3)：388-392(in Chinese)．
[20]
李军,苏明．不同翼刀位置控制涡轮叶栅二次流的数值研究[J]．中国电机工程学报,2008,28(8)：82-87．Li Jun,Su Ming．Numerical simulation on secondary flow control in turbine stator cascade with different position of endwall fence[J]．Proceedings of the CSEE,2008,28(8)：82-87(in Chinese)．
[21]
邓庆锋,郑群,张海,等．可控涡设计高负荷涡轮二次流旋涡结构及损失分析[J]．中国电机工程学报,2012,32(20)：108-114．Deng Qingfeng,Zheng Qun,Zhang Hai,et al．Analysis of secondary flow vortex structure and losses in a high load turbine designed by the controlled vortex method[J]．Proceedings of the CSEE,2012,32(20)：108-114(in Chinese)．
[22]
邓庆锋,郑群,刘春雷,等．基于控制轴向速度变化的1.5级涡轮压力可控涡设计[J]．航空学报,2011,32(12)：2182-2193．Deng Qingfeng,Zheng Qun,Liu Chunlei,et al．Pressure controlled vortex design of 1.5-stage turbine based on the method of controlling axial velocity variation[J]．Acta Aeronautica et Astronautica Sinica,2011,32(12)：2182-2193(in Chinese)．
