张知翔,王云刚,赵钦新．H 型鳍片管性能优化的数值研究[J]．动力工程学报,2010,30(12):941-946． Zhang Zhixiang,Wang Yungang,Zhao Qinxin．Numerical study on performance optimization of H-type finned tubes[J]．Journal of Chinese Society of Power Engineering,2010,30(12):941-946(in Chinese)．
[2]
马有福,袁益超,刘聿拯,等．横向截距对锯齿螺旋翅片换热管特性影响的实验研究[J]．中国电机工程学报,2011,31(8):67-72． Ma Youfu,Yuan Yichao,Liu Yuzheng,et al．Experimental studies on the effects of transverse pitch on heat transfer and flowresistance characteristics of serrated spiral finned tube banks[J]．Proceedings of the CSEE,2011,31(8):67-72(in Chinese)．
[3]
毕成,唐桂华,陶文铨．微酒窝通道与圆柱面凹槽通道对流传热强化分析[J]．工程热物理学报,2012,33(7):1225-1228． Bi Cheng,Tang Guihua,Tao Wenquan．Numerical study of the convective heat transfer enhancement in the micro channel with dimples and cylindical grooves[J]．Journal of Engineering Thermophysics,2012,33(7):1225-1228(in Chinese)．
[4]
Li B,Feng B,He Y L,et al．Experimental study on friction factor and numerical simulation on flow and heat transfer in an alternating elliptical axis tube[J]．Applied Thermal Engineering,2006,43(26):2336-2344．
[5]
杨立军,贾思宁,卜永东,等．电站间冷系统空冷散热器翅片管束流动传热性能的数值研究[J]．中国电机工程学报,2012,32(32):50-57． Yang Lijun,Jia Sining,Bu Yongdong,et al．Numerical simulation of flow behaviors and heat transfer characteristic of rectangular finned elliptical tube heat exchanger[J]．Proceedings of the CSEE,2012,32(32):50-57(in Chinese)．
[6]
杨立军, 张凯峰, 杜小泽,等．空冷凝汽器椭圆翅片椭圆管束外空气的流动与传热特性[J]．动力工程,2008,28(6):911-923． Yang Lijun,Zhang Kaifeng,Du Xiaoze,et al．Flow and heat transfer characteristics of cooling air outside elliptical tube bundles fixed with elliptical fin in air-cooled condenser[J]．Journal of Power Engineering,2008,28(6):911-923(in Chinese)．
[7]
李惠珍,屈治国,程永攀,等．开缝翅片流动和传热性能的实验研究及数值模拟[J]．西安交通大学学报,2005,39(3):229-232 ． Li Huizhen,Qu Zhiguo,Cheng Yongpan,et al. Experimental and numerical study on heat transfer and fluid flow characteristics of slotted fin-and-tube heat transfer surfaces[J]．Journal of Xi’an Jiaotong University,2005,39(3):229-232(in Chinese)．
[8]
Mosaffa A H,Talati F,Rosen M A,et al．Approximate analytical model for PCM solidification in a rectangular finned container with convective cooling boundaries original research article[J]．International Communications in Heat and Mass Transfer,2012,39(2):318-324．
[9]
冯丽丽,杜小泽,杨勇平,等．椭圆管矩形翅片间空气流动的扰流特征[C]//工程热物理年会,青岛,2011． Feng Lili,Du Xiaoze,Yang Yongping,et al．Characteristics of air flow around elliptical tubes with rectangular fins[C]// Engineering Thermal Physics Annual Meeting,Qingdao,2011．
[10]
段芮,徐之平,马虎根,等．椭圆管散热器传热及阻力性能试验研究[J]．能源研究与信息,2007,23(2):105-110． Duan Rui,Xu Zhiping,Ma Hugen,et al．Experimental Research on heat transfer and resistance characteristics of H-type finned elliptical tubes[J]．Enerhy Research and Information,2007,23(2):105-110(in Chinese)．
[11]
李启良,赵兰萍．矩形翅片椭圆管热交换器流动和换热特性的数值模拟[J]．流体机械,2006,34(8):67-70． Li Qiliang,Zhao Lanping．Numerical simulation of flow behaviors and heat transfer characteristic of rectangular finned elliptical tube heat exchanger[J]．Fluid Machinery,2006,34(8):67-70(in Chinese)．
[12]
Ay H,Jang J Y,Yeh H N．Local heat transfer measure- ments of plate finned-tube heat exchangers by infrared thermography[J]．Heat Transfer,2002,45(20):4069-4078．
[13]
周文铸,欧阳新萍,刘道平．滴状翅片管传热及阻力特性的试验研究[J]．热能动力工程,2006,21(2):156-160． Zhou Wenzhu,Oyang Xinping,Liu Daoping. Experimental study of the heat transfer and resistance characteristics of drop-shaped finned tubes[J]．Journal of Engineering for Thermal Energyand Power,2006,21(2):156-160(in Chinese)．
[14]
Gregory J Z,Louay M C,Pedro J M．Experimental determination of heat transfer and friction in helically-finned tubes[J]．Experimental Thermal and Fluid Science,2008,32(3):761-775．
[15]
Erling Næss．Experimental investigation of heat transfer and pressure drop in serrated-fin tube bundles with staggered tube layouts[J]．Applied Thermal Engineering,2010,30(13):1531-1537．
[16]
史佑吉,高伟桐,吴振亚,等．矩形翅片椭圆管传热及阻力性能的试验研究[J]．中国电机工程学报,1984,4(1):53-61． Shi youji,Gao weitong,Wu zhenya,et al．Experimental study of the heat transfer and resistance characteristics of rectangular-finned elliptical tube[J]．Proceedings of the CSEE,1984,4(1): 53-61(in Chinese)．
[17]
Jin Y,Tang G H,He Y L,et al．Parametric study and field synergy principle analysis of H-type finned tube bank with 10 rows[J]．International Journal of Heat and Mass Transfer,2013,60(3):241-251．
[18]
李飞,史月涛,孙奉仲．椭圆H型翅片管管束阻力特性的试验研究[J]．中国电机工程学报,2013,33(32):34-39． Li Fei,Shi Yuetao,Sun Fengzhong．Experimental research on resistance characteristics of H-type elliptical finned tube bundles[J]．Proceedings of the CSEE,2013,33(32):34-39(in Chinese)．
[19]
张来,杜小泽,杨立军,等．开孔矩形翅片椭圆管流动与换热特性的数值研究[J]．工程热物理学报,2006,27(6):990-992． Zhang Lai,Du Xiaoze,Yang Lijun,et al．The flow and heat transfer characteristics of numerical investigation of rectangular fin eliptic-tube with nterrupted holes [J]．Journal of Engineering Thermophysics,2006,27(6):990-992(in Chinese)．
[20]
刘聿拯,袁益超,徐世洋,等．H形鳍片管束传热与阻力特性实验研究[J]．上海理工大学学报,2004,26(5):457-460． Liu Yuzheng,Yuan Yichao,Xu Shiyang,et al．Experimental study on the characteristics of heat transfer and flow resistance for H-type finned tube banks[J]．Journal of University of Shanghai For Science and Technology．2004,26(5):457-460(in Chinese)．
[21]
杨大哲,黄新元,薛立志．H型鳍片管的传热与流动特性试验研究[J]．锅炉制造,2008 (6):14-17． Yang Dazhe,Huang Xinyuan,Xue Lizhi．The Experimental study on the characteristics of heat transfer and flow of H-type finned tube[J]．Boiler Manufacturing,2008 (6):14-17(in Chinese)．
