Alkhimov A P, Papyrin A N, Kosarev V. Gas dynamic sparying method for applying a coating[P]. US patent: 5302414, 1994.
[2]
Richer P, Zuniga A, Yandouzi M, et al. CoNiCrAlY microstructural changes induced during cold gas dynamic spraying[J]. Surf. Coat. Technol., 2008, 203(3-4): 364.
[3]
Parthasarathi S, Tittmann B R. Elastic properties of ceramic thin structures[A]. IEEE Ultrasonics Symposium 619[C]. New York: 1996.
[4]
Sakudo N, Mizutani D, Yoshida M. Surface coating by combining double-pulse plasma with plasma-based ion implantation[A].IEEE Ultrasonics Symposium 5P05[C]. New York: 1996.
[5]
Jensen H, Sobota J, Sorensen G. A study of film growth and tribological characterization of nano-structured C-N/TiNx multiplayer coatings[J]. Surf. Coat. Technol., 1997, 94~95:174.
Tack U. The influence of cobalt and rhenium on the behavior of MCrAlY coatings[D]. Freiberg: Freiberg University of Technology, 2004.
[9]
Toscano J, Gil A, Huttel T, et al. Temperature dependence of phase relationships in different types of MCrAlY-coatings [J]. Surf. Coat. Technol., 2007, 202(4~7):603.
[10]
Naumenko D, Shemet V, Singheiser L, et al. Failure mechanisms of thermalbarrier coatings on MCrAlY-type bondcoats associated with the formation of the thermally grown oxide [J]. J.Mater. Sci., 2009, 44(7): 1687.
[11]
Ogawa K , Ito K, Shoji T, et al. Effects of Ce and Si additions to CoNiCrAlY bond coat materials on oxidation behavior and crack propagation of thermal barrier coatings[J]. J. Therm. Spray Technol., 2006, 15(4): 640.
[12]
Matsumoto M, Hayakawa K, Kitaoka S, et al. The effect of preoxidation atmosphere on oxidation behavior and thermal cycle life of thermal barrier coatings[J]. Mater. Sci. Eng., 2006, A441(1~2): 119.
[13]
Taniguchi S, Andoh A. Improvement in the oxidation resistance of an Al-deposited Fe-Cr-Al foil by preoxidation[J].Oxid. Met., 2002, 58(5~6): 545.
[14]
Maier R D, Scheuermann C M, Andrews C W. Degradation of a two-layer thermal barrier coating under thermal cycling[J]. Am.Ceram. Soc. Bull., 1981, 60(5): 555.
[15]
Teixeira V, Andritschky M, Fischer W, et al. Effects of deposition temperature and thermal cycling on residual stress state in zirconia-based thermal barrier coatings[J]. Surf. Coat. Technol.,1999, 120-121: 103.
[16]
Khor K A, Gu Y W. Thermal properties of plasma-sprayed functionally graded thermal barrier coatings[J]. Thin Solid Films,2000, 372(1-2): 104.
[17]
Burtin P, Brunelle J P, Soustelle M. Influence of surface area and additives on the thermal stability of transition alumina catalyst supports. I: Kinetic data[J]. Appl. Catal., 1987, 34:225.
[18]
Burtin P, Brunelle J P, Pijolat M, et al. Influence of surface area and additives on the thermal stability of transition alumina catalyst supports. II: Kinetic model and interpretation [J].Appl. Catal., 1987, 34: 239.
