Nickel H, Clemens D, Quadakkers W J, et al. Development of NiCrAlY alloys for corrosion-resistant coatings and thermal barrier coatings of gas turbine components [J]. J. Press. Vess-T. ASME, 1999, 121(4): 384
[5]
Padture N P, Gell M, Jordan E H. Thermal barrier coatings for gas-turbine engine apptications [J]. Science, 2002, 296: 280
Lee E Y, Chartier D M, Biederman R R, et al. Modeling the microstructural evolution and degradation of MCrAlY coatings during high temperature oxidation [J]. Surf. Coat. Technol., 1987, 32(1-4): 19
[8]
Tang F, Ajdelsztajn L, Schoenung J M. Influence of cryomilling on the morphology and composition of the oxide scales formed on HVOF CoNiCrAlY coatings [J]. Oxid. Met., 2004, 61(3/4): 219
[9]
Suresh S. Graded materials for resistance to contact deformation and damage [J]. Science, 2001, 292: 2447
Montavon G. Recent developments in thermal spraying for improved coating characteristics and new applications/process controls and spray processes [J]. High Temp. Mater. Proc., 2004, 8(1): 45
[12]
信觉俗. 多弧离子镀技术 [J]. 真空, 1987, (3): 43
[13]
Wood J H, Swede S T. Comparison of coating performance and degradation modes in heavy-duty land-based gas-turbines [J]. Surf.Coat. Technol., 1993, 61(1-3): 1
[14]
Chan K S, Cheruvu N S, Leverant G R. Degradation and life prediction of gas-turbine duplex coatings [J]. Mater. Sci. Forum, 2001,369-372(2): 623
[15]
Nicholls J R, Simms N J, Chan W Y, et al. Smart overlay coatings-concept and practice [J]. Surf. Coat. Technol., 2002, 149(2/3): 236
[16]
Guo M H, Wang Q M, Ke P L, et al. The preparation and hot corrosion resistance of gradient NiCoCrAlYSiB coatings [J]. Surf. Coat.Technol., 2006, 200(12/13): 3942
[17]
Bao Z B, Wang Q M, Li W Z, et al. Preparation and hot corrosion behaviour of an Al-gradient NiCoCrAlYSiB coating on a Ni-base superalloy [J]. Corros. Sci., 2009, 51(4): 860
[18]
Xu C Z, Jiang S M, Bao Z B, et al. Isothermal oxidation behaviour of a gradient NiCoCrAlSiY coating deposited by arc ion plating on a Ni-based single crystal superalloy [J]. Corros. Sci., 2009, 51(6): 1467
[19]
Jiang S M, Peng X, Bao Z B, et al. Preparation and hot corrosion behaviour of a MCrAlY+AlSiY composite coating [J]. Corros. Sci.,2008, 50(11): 3213
Ma J, Jiang S M, Gong J, et al. Composite coatings with and without an in situ forming Cr-based interlayer: Preparation and oxidation behaviour [J]. Corros. Sci., 2011, 53(9): 2894
[22]
Ma J, Jiang S M, Gong J, et al. Behaviour and mechanisms of alkali-sulphate-induced hot corrosion on composite coatings at 900 ℃ [J]. Corros. Sci., 2012, 58(5): 251
