Zhong L, Rahman M F, Hu W Y, et al. Analysis of direct torque control in permanent magnet synchronous motor drives[J]. IEEE Transactions on Power Electronics, 1997, 12(3): 528-536.
Tian Chun, Hu Yuwen. Study of the scheme and theory of the direct torque control in permanent magnet synchronous motor drives[J]. Transactions of China Electrotechnical Society, 2002, 17(1): 7-11.
Hu Hu, Li Yongdong. A predictive direct torque control strategies of induction motor based on area voltage vector table[J]. Transactions of China Electrotechnical Society, 2004, 19(2): 25-30.
Li Yaohua, Liu Weiguo. A method for suppressing unreasonable torque ripple in direct torque control of permanent magnet synchronous motor[J]. Journal of Northwestern Polytechnical University, 2007, 25(5): 667-671.
Sun Dan, He Yikang, Zhi Dawei. Direct torque control of a permanent magnet synchronous motor based on fuzzy logic[J]. Transactions of China Electrotechnical Society, 2003, 18(1): 33-38.
Liu Jun, Liu Ding, Wu Pusheng, et a1. The simulation analysis of permanent magnet synchronous motor based on the strategy of modulating the time of voltage vector[J]. Proceedings of the CSEE, 2004 24(10): 148-152.
Luo Guangzhao, Li Fei, Yang Nanfang, et al. An efficient three-level inverter direct torque control (DTC) of permanent magnet synchronous motor (PMSM)[J]. Journal of Northwestern Polytechnical University, 2012, 30(1): 22-26.
Liu Shuxi, Wang Mingyu. Direct torque predictive control system supplied by three-level inverter based on a fast SVPWM algorithm[J]. Transactions of China Electrotechnical Society, 2009, 24(2): 35-41.
[16]
Tang Lixin, Zhong Limin, Rahman M F, et a1. A novel direct torque controlled interior permanent magnet synchronous machine drive with low ripple in flux and torque and fixed switching frequency[J]. IEEE Transactions on Power Electronics, 2004, 19(2): 346-354.
Liu Jun, Chu Xiaogang, Bai Huayu. Study of permanent magnet synchronous motor direct torque control based on the strategy of reference stator flux linkage and voltage space vector modulation[J]. Transactions of China Electrotechnical Society, 2005, 20(6): 11-15.
Sun Dan, He Yikang. Space vector modulation based constant switching frequency direct torque control for permanent magnet synchronous motor[J]. Proceedings of the CSEE, 2005, 25(12): 112-116.
Liang Yan, Li Yongdong. Initial rotor position estimation for the sensorless vector control of PMSMs[J]. Transactions of China Electrotechnical Society, 2003, 18(2): 10-13.
Qin Feng, He Yikang, Liu Yi, et al. Rotor position sensorless estimation for permanent magnet synchronous motors[J]. Journal of Zhejiang University (Engineering Science), 2004, 38(4): 465-469.
Liao Yong, Shen Lang, Yao Jun, et al. Initial rotor position detection for surface mounted PMSM based on rotating high frequency signal injection[J]. Electric Machines and Control, 2009, 13(2): 203-207.
[27]
Consoli A, Scarcella G, Testa A. Industry application of zero-speed sensorless control techniques for PM synchronous motors[J]. IEEE Transactions on Industry Applications, 2001, 37(2): 513-521.
Wang Zihui, Lu Kaiyuan, Ye Yunyue. Initial position estimation method for permanent magnet synchronous motor based on improved pulse voltage injection[J]. Proceedings of the CSEE, 2011, 31(36): 95-100.
Wei Kun, Jin Xinhai. Initial rotor position estimate technique on surface mounted permanent magnet synchronous motor[J]. Proceedings of the CSEE, 2006, 26(22): 104-109.
Qin Feng, He Yikang, Liu Yi, et al. Comparative investigation of sensorless control with two high- frequency signal injection schemes[J]. Proceedings of the CSEE, 2005, 25(5): 116-120.