Press V L, Bruning A M. Advanced risk assessment methods for aircraft electrical wiring interconnection systems[C]. 6th Joint FAA/DoD/NASA Conference on Aging Aircraft, San Francisco, CA, USA, Septem-
[3]
ber, 2002.
[4]
Linzey W G. Development of an electrical wire inter- connect system risk assessment tool[M]. Lectromechanical Design Company, DOT/FAA/AR-TN06/17, 2006.
[5]
Van der Sluis L, Rutgers W R, Koreman C G A. A physical arc model for the simulation of current zero behaviour of high-voltage circuit breakers[J]. IEEE Transactions on Power Delivery, 1992, 7(2): 1016-1022.
[6]
Linzey W, Traskos M, Brunin A. Development of an arc damage modeling tool[Z]. Lectromechanical Design Company, 2007.
[7]
Kurek J, Bernstein R, Etheridge M. Aircraft wiring degradation study[Z]. Raytheon Technical Services Company LLC, DOT/FAA/AR-08/2, 2008.
[8]
Linzey W, Traskos M, Bruning A, et al. Progress in developing a software based arc damage modeling tool[C]. 10th Aging Aircraft Conference, 2008.
[9]
Linzey W G, Traskos M G, Bruning A M, et al. Arcing damage to aircraft components and wire at a distance[C]. 11th Aging Aircraft Conference, 2009.
[10]
Linzey W, Wiesenfeld E, Traskos M, et al. Electrical wire interconnect system risk assessment tool: U.S. Patent US7536284B2[P]. 2009-5-19.
[11]
Linzey W G, Traskos M G, Mazzuchi T A. Deve- lopment of the electrical wiring interconnection system risk assessment tool[Z]. Lectromechanical Design Company, DOT/FAA/AR-09/47, 2010.
[12]
Gammon T, Matthews J. Conventional and recomm-
[13]
ended arc power and energy calculations and arc damage assessment[J]. IEEE Transactions on Industry Applications, 2003, 39(3): 594-599.
[14]
Swingler J, Mcbride J W. Modeling of energy trans-
[15]
port in arcing electrical contacts to determine mass loss[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 1998, 21(1): 54-60.
Liu Zhigang, Geng Yingsan, Wang Jianhua, et al. Design and analysis of new type air-core reactor based on coupled fluid-thermal field calculation[J]. Transactions of China Electrotechnical Society, 2003, 18(6): 59-63.
