Yang Y B, Wang X H, Zhang R, et al. The optimization of pole arc coefficient to reduce cogging torque in surface-mounted permanent magnet motors[J]. IEEE Transactions on Magnetics, 2006, 42(4): 1135-1138.
[2]
Islam R, Husain I, Fardoun A, et al. Permanent- magnet synchronous motor magnet designs with skewing for torque ripple and cogging torque reduction[J]. IEEE Transactions on Industry Applications, 2009, 45(1): 152-160.
[3]
Dutta R, Sayeef S, Rahman M F. Cogging torque analysis of a segmented interior permanent magnet machine[C]. International Conf on Electric Machines & Drives, Sydney, 2007, 1: 781-786.
[4]
Zhu Z Q, Ruangsinchaiwanich S, Chen Y, et al. Evaluation of superposition technique for calculating cogging torque in permanent-magnet brushless machines[J]. IEEE Transactions on Magnetics, 2006, 42(3): 1597-1603.
Yang Y B, Wang X H, Zhang X, et al. Study of magnet shifting for reduction of cogging torque in permanent magnet motors[J]. Proceedings of the CSEE, 2006, 21(10): 22-25.
[7]
Jiang X T, Xing X W, Ling Y, et al. Theoretical and simulation analysis of influences of stator tooth width on cogging torque of BLDC motors[J]. IEEE Trans. Magn. , 2009, 45(10): 4601-4604.
[8]
Zhu Z Q, Ruangsinchaiwanich S, Ishak D, et al. Analysis of cogging torque in brushless machines having nonuniformly distributed stator slots and stepped rotor magnets[J]. IEEE Trans. Magn. , 2005, 41(10): 3910-3912.
[9]
Kim T H, Won S H, Bong K, et al. Reduction of cogging torque in flux-reversal machine by rotor teeth pairing[J]. IEEE Transactions on Magnetics, 2005, 41(10): 3964-3966.
[10]
Wang D H, Wang X H, Qiao D W, et al. Reducing cogging torque in surface-mounted permanent-magnet motors by nonuniformly distributed teeth method[J]. IEEE Transactions on Magnetics, 2011, 47(9): 2231-2239.
[11]
Zhu Z Q, Ruangsinchaiwanich S, Howe D, et al. Synthesis of cogging-torque waveform from analysis of a single stator slot[J]. IEEE Transactions on Industry Applications, 2006, 42(3): 650-657.
[12]
Abbaszadeh K, Jafari M. Optimizing cogging torque reduction in slot opening shift method for BLDC motor by RSM[C]. Power Electronics, Drive Systems and Technologies Conference, Tehran, 2011, 1: 62-66.
[13]
Bianchi N, Bolognani S, Cappello A D F. Reduction of cogging force in PM linear motors by pole-shifting[J]. IEE Proceedings-Electric Power Applications, 2005, 152(3): 703-709.
[14]
Zhu L, Jiang S Z, Zhu Z Q, et al. Analytical methods for minimizing cogging torque in permanent-magnet machines[J]. IEEE Transactions on Magnetics, 2009, 45(4): 2023-2030.
[15]
Zhu Z Q, Howe D. Influence of design parameters on cogging torque in permanent magnet machines[J]. IEEE Transactions on Energy Conversion, 2000, 15(4): 407-412.
[16]
Lateb R, Takorabet N, Meibody Tabar F. Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors[J]. IEEE Transactions on Magnetics, 2006, 42(3): 442-445.
[17]
Lukaniszyn M, Jagiela M, Wrobel R. Optimization of permanent magnet shape for minimum cogging torque using a genetic algorithm[J]. IEEE Transactions on Magnetics, 2004, 40(2): 1228-1231.
[18]
Kim K C, Koo D H, Hong J P, et al. A study on the characteristics due to pole-arc to pole-pitch ratio and saliency to improve torque performance of IPMSM[J]. IEEE Transactions on Magnetics, 2007, 43(6): 2516-2518.
Liu T, Ouyang H L, Huang S D, et al. Reducing cogging torque in permanent magnet wind power generators based on repeat unit[J]. Proceedings of the CSEE, 2011, 26(12): 43-48.
[21]
Breton C, Bartolome J, Benito J A, et al. Influence of machine symmetry on reduction of cogging torque in permanent magnet brushless motors[J]. IEEE Transactions on Magnetics, 2000, 36(5): 3819-3823.
