曹国顺. 工业机器人精确制孔试验研究[D].杭州:浙江大学, 2012 Cao Guoshun.Research on industry robot precision drilling[D].Hangzhou:Zhejiang University, 2012(in Chinese)
[2]
Henrik K, Gilbert O.Low-cost automation for aircraft assembly[C]//Proceedings of the Aerospace Manufacturing and Automated Fastening Conference.St Louis, MO:[s.n.], 2004:117-124
Serracín J R, Puglisi L J, Saltaren R, et al.Kinematic analysis of a novel 2-d.o.f. orientation device[J].Robotics and Autonomous Systems, 2012, 60(6):852-861
[5]
Zhang L X, Wang X S.Dynamic control of a flexible drilling robot end-effector[C]//Control and Decision Conference.Piscataway, NJ:IEEE, 2012:2199-2204
[6]
公茂震, 袁培江, 王田苗, 等.航空制孔机器人末端垂直度智能调节方法[J].北京航空航天大学学报, 2012, 38(10):1400-1404 Gong Maozhen, Yuan Peijiang, Wang Tianmiao, et al.Intelligent verticality-adjustment method of end-effector in aeronautical drilling robot[J].Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(10):1400-1404(in Chinese)
[7]
单以才, 何宁, 李亮, 等.大型悬置壁板装配制孔主轴法向快捷调姿方法[J].机械科学与技术, 2011, 30(11):1844-1849 Shan Yicai, He Ning, Li Liang, et al.Spindle's prompt normal posture alignment method for assembly holemaking on large suspended panel[J].Mechanical Science and Technology for Aerospace Engineering, 2011, 30(11):1844-1849(in Chinese)
[8]
齐颖, 谭宗啸. 双偏心轮副面调整机构设计分析[J].空间电子技术, 2005, 2(3):51-54 Qi Ying, Tan Zongxiao.Design and analysis of double eccentric gears side adjusting mechanism[J].Space Electronic Technology, 2005, 2(3):51-54(in Chinese)
[9]
袁红璇. 飞机结构 件连接孔制造技术[J].航空制造技术, 2007(1):96-99 Yuan Hongxuan.Manufacturing technology of connecting hole in aircraft structures[J].Aeronautical Manufacturing Technology, 2007(1):96-99(in Chinese)
[10]
王黎明, 冯潼能.数字化自动钻铆技术在飞机制造中的应用[J].航空制造技术, 2008(11):42-45 Wang Liming, Feng Tongneng.Application of digital automatic drill-riveting technology in aircraft manufacture[J].Aeronautical Manufacturing Technology, 2008(11):42-45(in Chinese)
