Spearing S M, Chen K S.Micro-gas turbine engine materials and structures[J].Ceramic Engineering and Science Procedings, 1997, 18(4):11-18
[2]
Epstein A H, Senturia S D.Macro power from micro machinery[J].Science, 1997, 276:1211
[3]
Epstein A H. Millimeter-scale, MEMS gas turbine engines[R].ASME GT-2003-38866, 2003
[4]
冯涛, 周颖, 邹正平, 等.向心涡轮内部流动数值模拟分析[J].航空动力学报, 2003, 21(3):448-454 Feng Tao, Zhou Ying, Zou Zhengping, et al.Numerical simulation of the flow inside radial inflow turbine[J].Journal of Aerospace Power, 2003, 21(3):448-454(in Chinese)
[5]
黄国平, 梁德旺, 马向东, 等.微型涡轮发动机传热效应的建模分析与实验研究[J].航空学报, 2008, 29(3):542-547 Huang Guoping, Liang Dewang, Ma Xiangdong, et al.Modeling analysis and experimental study on heat transfer effect in micro turbine engine[J].Acta Aeronautica et Astronautica Sinica, 2008, 29(3):542-547(in Chinese)
[6]
Rautenberg M, Mobarak A, Malobabic M.Influence of heat transfer between turbine and compressor on the performance of small turbocharger[C]//Proceedings of the 1983 Tokyo International Gas Turbine Congress.Tokyo:Gas Turbine Soc of Japan, 1984, 2:567-574
[7]
Rautenberg M, Kammer N.On the thermodynamics of non-adiabatic compression and expansion processes in turbomachines[C]//5th Intl Conference of Mechanical Power Engineering, 1984:13-15
[8]
Isomura K, Murayama M, Kawakubo T.Feasibility study of a gas turbine at micro scale[J].ASME Paper, 2001(2001-GT):0101
[9]
Onishi T, Burguburu S, Dessornes O, et al.Numerical design and study of a mems-based micro turbine[C]//Proceedings of the ASME Turbo Expo.Reno-Tahoe, NV:ASME, 2005, 1:847-855
[10]
Wiesche S A D. A mobile test rig for micro gas turbines based on a thermal power measurement approach[J].Journal of Engineering for Gas Turbines and Power, 2012, 134(11):112301
[11]
龚建波, 林峰, 徐纲, 等. 非绝热小燃机热力学模型分析[J].工程热物理学报, 2009, 30(10):1643-1647 Gong Jianbo, Lin Feng, Xu Gang, et al.Analyse of a thermodynamic model of a non-adiabatic small gas turbine[J].Journal of Engineering Thermophysics, 2009, 30(10):1643-1647(in Chinese)
[12]
付雷, 丰镇平. 毫米级微型燃气轮机系统设计原则与可实现性循环分析[J].西安交通大学学报, 2011, 45(5):42-46 Fu Lei, Feng Zhenping.Design principle and cycle analysis of millimeter-scale micro-turbine[J].Journal of Xi'an Jiaotong University, 2011, 45(5):42-46(in Chinese)
[13]
边磊, 严泽想, 邹正平.影响毫米级微型涡轮气动性能的若干参数[J].航空动力学报, 2012, 27(10):2287-2296 Bian Lei, Yan Zexiang, Zou Zhengping.Influences of several parameters on aerodynamic performance of micro-radial turbine[J].Journal of Aerospace Power, 2003, 21(3):2287-2296(in Chinese)
[14]
周琨, 边磊, 邹正平, 等.壁面导热对微型向心涡轮性能及流动影响[J].推进技术, 2013, 34(9):1248-1256 Zhou Kun, Bian Lei, Zou Zhengping, et al.Effect of wall heat transfer on performance and flow for micro radial inflow turbine[J].Journal of Propulsion Technology, 2013, 34(9):1248-1256(in Chinese)
[15]
Epstein A H, Senturia S D, Anathasuresh G, et al.Power MEMS and microengines[C]//Proceedings of the 1997 International Conference on Solid-State Sensors and Actuators.Piscataway, NJ:IEEE, 1997, 2:753-756
[16]
Sirakov B T. Characterization and design of non-adiabatic micro-compressor impeller and preliminary design of self-sustained micro engine system[D].Cambridge:Massachusetts Institute of Technolog, 2005
[17]
Gong Y, Sirakov B T, Epstein A H, et al.Aerothermodynamics of micro-turbomachinery[C]//The ASME Turbo Expo 2004.Vienna:ASME International, 2004, 6:95-102
[18]
Watanabe N, Teramoto S, Nagashima T.Numerical analysis of 2.5 dimensional geometry turbine performance[C]//Proceedings of the International Gas Turbine Congress, 2003:2-7
