尚耀星,吴帅,焦宗夏,等.基于极限性能要求的电液负载模拟器多刚度与非线性复合数学模型[J].航空学报,2009,30(7):1331-1340 Shang Yaoxing,Wu Shuai,Jiao Zongxia,et al.Complex mathematical model of electro-hydraulic load simulator including multi-stiffness and nonlinear factors in ultimate performance research[J].Acta Aeronautica et Astronautica Sinica,2009,30(7):1331-1340(in Chinese)
[2]
张彪.电液负载模拟器多余力矩抑制及其反步自适应控制研究[D].哈尔滨:哈尔滨工业大学,2009 Zhang Biao.Extra torque rejection and adaptive backstepping control of electro hydraulic load simulator[D].Harbin:Harbin Institute of Technology,2009(in Chinese)
[3]
华清,焦宗夏,王晓东,等.电液负载模拟器的精确数学模型[J].机械工程学报,2002,38(11):31-35 Hua Qing,Jiao Zongxia,Wang Xiaodong,et al.Complex mathematical model of electro-hydraulic torque load simulator[J].Chinese Journal of Mechanical Engineering,2002,38(11):31-35(in Chinese)
[4]
王晓东,焦宗夏,谢劭辰.基于LuGre模型的电液加载系统摩擦补偿[J].北京航空航天大学学报,2008,34(11):1254-1257 Wang Xiaodong,Jiao Zongxia,Xie Shaochen.LuGre-based compensation for friction in electro-hydraulic loading[J].Journal of Beijing University of Aeronautics and Astronautics,2008,34(11):1254- 1257( in Chinese)
[5]
姚建勇,焦宗夏.改进型LuGre模型的负载模拟器摩擦补偿[J].北京航空航天大学学报,2010,36(7):812-820 Yao Jianyong,Jiao Zongxia.Friction compensation for hydraulic load simulator based on improved LuGre friction model[J].Journal of Beijing University of Aeronautics and Astronautics,2010,36(7):812-815(in Chinese)
[6]
高俊霞,华清,焦宗夏.电液加载系统中的多余力及各种补偿方法的比较[J].液压气动与密封,2003(5):1-6 Gao Junxia,Hua Qing,Jiao Zongxia.Comparison of various compensation methods about surplus torque in electro-hydraulic loading system[J].Hycl Pneum & Seals,2003(5):1-6 (in Chinese)
[7]
刘丽兰,刘宏昭,吴子英,等.机械系统中摩擦模型的研究进展[J].力学进展,2008,38(2):201-213 Liu Lilan,Liu Hongzhao,Wu Ziying,et al.An overview of friction models in mechanical[J].Advances in Mechanics,2008,38(2):201-213(in Chinese)
[8]
向红标,裘祖荣,李型飞,等.精密实验平台的非线性摩擦建模与补偿[J].光学精密工程,2010,18(5):1119-1127 Xiang Hongbiao,Qiu Zurong,Li Xingfei,et al.Nonlinear friction modeling and compensation of high-precision experimental platforms[J].Opt Precision Eng,2010,18(5):1119-1127(in Chinese)
[9]
孙洪鑫,王修勇,陈政清.基于改进遗传算法的LuGre模型参数辨识[J].武汉理工大学学报,2009,31(23):113-117 Sun Hongxin,Wang Xiuyong,Chen Zhengqing.Parameter identification of LuGre model with improved genetic algorithms[J].Journal of Wuhan University of Technology,2009,31(23):113-117(in Chinese)
[10]
刘柏希.基于改进链码法的LuGre摩擦模型动态参数辨识[J].计算力学学报,2012,29(2):278-282 Liu Baixi.Parameters identification for LuGre friction model based on modified chain code recognition method[J].Chinese Journal of Computational Mechanics,2012,29(2):278-282(in Chinese)
[11]
Shang Y X,Jao Z X,Wang X D,et al.Study on friction torque loading with an electro-hydraulic load simulator[J].Chinese Journal of Aeronautics,2009,22(6):691-699
[12]
孙萌,李长春,延皓,等.多自由度伺服机构负载模拟系统动态特性研究[J].兵工学报,2013,34(3):378-384 Sun Meng,Li Changchun,Yan Hao,et al.Study on dynamic performance of multiple-DOF servo mechanism’s load simulator system[J].Journal of China Ordnance,2013,34(3):378-384(in Chinese)
[13]
杨波,王俊奎.无人机舵面负载模拟系统的小脑模型控制[J].北京航空航天大学学报,2009,35(11):1361-1365 Yang Bo,Wang Junkui.CMAC neural network for the rudder dynam ic load smiulator of unmanned aerial vehicles[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(11):1361-1365(in Chinese)
[14]
杨波,程龙.提高电动加载系统输出平滑的CMAC复合控制[J].北京航空航天大学学报,2013,39(6):723-727 Yang Bo,Cheng Long.Improving the output smoothing of the electric loading system based on the CMAC+PD compound control strategy[J].Beijing University of Aeronautics and Astronautics,2013,39(6):723-727(in Chinese)
[15]
牛国臣,王巍,魏志强,等.基于力矩前馈和舵机角度补偿的力矩控制[J].北京航空航天大学学报,2013,39(3):300-304 Niu Guochen,Wang Wei,Wei Zhiqiang,et al.Torque control based on torque feedforward and rudder angle compensation[J].Beijing University of Aeronautics and Astronautics,2013,39(3):300-304(in Chinese)
[16]
汪成文,焦宗夏,罗才瑾.基于改进的速度同步控制的电液负载模拟器[J].航空学报,2012,33(9):1717-1725 Wang Chengwen,Jiao Zongxia,Luo Caijin.An improved velocity synchronization control on electro-hydraulic load simulator[J].Acta Aeronautica et Astronautica Sinica,2012,33(9):1717-1725(in Chinese)
