孙少纯,马德新, 赵玉涛,等.加压凝固熔模铸造制备纤维增强铝基复合材料[J].江苏大学学报,2009,30(6):577-581 Sun Shaochun,Ma Dexin,Zhao Yutao,et al.Preparation of continuous fiber reinforced aluminum alloymatrix composites by pressure aided investment casting process[J].Journal of Jiangsu University,2009,30(6):577-581(in Chinese)
[2]
Yuan C, Jones S,Blackburn S.The influence of autoclave steam on polymer and organic fibre modified ceramic shells[J].Journal of the European Ceramic Society,2005,25(7):1081-1087
[3]
Wang F, Fei L,He B,et al.Microstructure and strength of needle coke modified ceramic casting molds[J].Ceramics International,2014,40(1 PART A):479-486
[4]
Yuan C, Compton D,Cheng X,et al.The influence of polymer content and sintering temperature on yttria face-coat moulds for TiAl casting[J].Journal of the European Ceramic Society,2012,32(16):4041-4049
[5]
Jones S, Yuan C.Advances in shell moulding for investment casting[J].Journal of Materials Processing Technology,2013,135(2-3 SPEC):258-265
[6]
Yuan C, Jones S.Investigation of fibre modified ceramic moulds for investment casting[J].Journal of the European Ceramic Society,2003,23(3):399-407
[7]
Pattnaik S, Karunakar D B,Jha P K.Developments in investment casting process:a review[J].Journal of Materials Processing Technology,2012, 212(11): 2332-2348
[8]
孔胜国. 大尺寸燃气轮机叶片的熔模铸造工艺[J].铸造,2012,61(10):1138-1141 Kong Shengguo.The investment casting technology of the large-size turbine blade[J].Foundry,2012,61(10):1138-1141(in Chinese)
[9]
李毅. 大型复杂薄壁Ti6Al4V合金熔模精密铸造工艺研究[J].钛工业进展,2012,29(3):22-25 Li Yi.Research on investment precision casting process of large thin wall complex Ti6Al4V alloy[J].Titanium Industry Progress,2012,29(3):22-25(in Chinese)
[10]
黄炳荣,景宗梁. 对熔模铸造现行制壳工艺的改进和讨论[J].铸造,2012,61(1):40-42 Huang Bingrong,Jing Zongliang.Improvement and discussion on current shell moulding technology of investment casting[J].Foundry,2012,61(1):40-42(in Chinese)
[11]
Park S H, Kim D J,Ryu G S,et al.Tensile behavior of ultra high performance hybrid fiber reinforced concrete[J].Cement and Concrete Composites,2012,34(2):172-184
[12]
Kim S B, Yi N H,Kim H Y,et al.Material and structural performance evaluation of recycled PET fiber reinforced concrete[J]. Cement and Concrete Composites,2010,32(3):232-240
[13]
Bo？njak J, O?bolt J,Hahn R.Permeability measurement on high strength concrete without and with polypropylene fibers at elevated temperatures using a new test setup[J].Cement and Concrete Research,2013,53:104-111
[14]
邓宗才,薛会青. 高韧性纤维增强水泥基复合材料的收缩变形[J].北京科技大学学报,2011,33(2):210-214 Deng Zongcai,Xue Huiqing.Shrinkage distortion of fiber-reinforced high-ductility cementitious composites[J].Journal of University of Science and Technology Beijing,2011,33(2):210-214(in Chinese)
[15]
Neussl E, Sahm P R.Selectively fibre-reinforced components produced by the modified investment casting process[J].Composites-Part A:Applied Science and Manufacturing,2001,32(8):1077-1083
