McClinton C R, Hunt J L,Ricketts R H,et al.Airbreathing hypersonic technology vision vehicles and development dreams[R]. AIAA-1999-4978,1999
[2]
William H H, David T P.Hypersonic airbreathing propulsion[M]. Washington D C:American Institute of Aeronautics and Astronautics,1994
[3]
Hiroaki K, Tetsuya S,Nobuhiro T.Optimization of airbreathing propulsion system for the TSTO spaceplane[R].AIAA-2001-1912,2001
[4]
Chavez F R, Schmidt D K.Analytical aero-propulsive/aeroelastic hypersonic vehicle model with dynamic analysis[J].Journal of Guidance Control and Dynamics,1994,17(6):1308-1319
[5]
Rudd L V, Pines D J.Integrated propulsion effects on dynamic stability and control of hypersonic waveriders[R].AIAA-2000-36948,2000
[6]
孟中杰,陈凯, 黄攀峰,等.高超声速飞行器机体/发动机耦合建模与控制[J].宇航学报,2008,29(5):1509-1524 Meng Zhongjie,Chen Kai,Huang Panfeng,et al.The coupling model and control between scramjet and airframe for hypersonic vehicle[J].Journal of Astronautics,2008,29(5):1509-1524(in Chinese)
[7]
Bolender M A, Doman D B.Nonlinear longitudinal dynamical model of an air-breathing hypersonic vehicle[J].Journal of Spacecraft and Rockets,2007,44(2):374-387
[8]
马辉,袁建平, 方群.吸气式高超声速飞行器动力学特性分析[J].宇航学报,2007,28(5):1100-1104MaHui,Yuan Jianping,Fang Qun.Dynamics analysis of air-breathing hypersonic vehicle[J].Journal of Astronautics,2007,28(5):1100-1104(in Chinese)
[9]
张晓嘉,梁德旺. 内压缩通道几何参数对高超声速进气道性能的影响[J].南京航空航天大学学报,2005,37(6): 685689 Zhang Xiaojia,Liang Dewang.Performance effects of geometry parameters on hypersonic inlet[J].Journal of Nanjing University of Aeronautics and Astronautics,2005,37(6):685-689(in Chinese)
[10]
Trapier S, Duveau P,Deck S.Experimental study of supersonic inlet buzz[R].AIAA-20451-244,2006
[11]
张晓嘉,梁德旺, 李博,等.典型二元高超声速进气道设计方法研究[J].航空动力学报,2007,22(8):1290-1296 Zhang Xiaojia,Liang Dewang,Li Bo,et al.Study of design method of typical two-dimensional hypeisonic inlet[J].Journal of Aerospace Power,2007,22(8):1290-1296(in Chinese)
[12]
洛广琦,郑九州, 宋頔源.考虑附面层影响的二元混压式进气道设计[J].航空动力学报,2009,24(9):2063-2068 Luo Guangqi,Zheng Jiuzhou,Song Diyuan.Design of a two-dimensional mixed-compression supersonic inlet with boundary layer consideration[J].Journal of Aerospace Power,2009, 24(9): 2063-2068(in Chinese)
[13]
Ryan P, Starkey M,Lewis J.Critical design issues for airbreathing hypersonic waverider missiles[J].Journal of Spacecraft and Rockets,2001,38(4):510-519
[14]
车竞,唐硕. 高超声速飞行器机身/超燃冲压发动机设计方法研究[J].试验流体力学,2006,20(2):41-49 Che Jing,Tang Shuo.Research of airframe/scramjet integrated design of hypersonic vehicle[J].Journal of Experiments in Fluid Mechanics,2006,20(2):41-49(in Chinese)
[15]
黎明,宋文艳,贺伟. 高超声速二维混压式前体/进气道设计方法研究[J].航空动力学报,2004,19(4):459-465 Li Ming,Song Wenyan,He Wei.Design method of two-dimensional hypersonic forebody/inlet of mixed compression[J].Journal of Aerospace Power,2004,19(4):459-465(in Chinese)
[16]
李留刚,谭慧俊, 孙姝,等.二元高超声速进气道不起动状态的信号特征及预警[J]. 航空学报,2010,31(12): 23242331 Li Liugang,Tan Huijun,Sun Shu,et al.Signal characteristics and prediction of unstarting process for two-dimensional hypersonic inlet[J].Acta Aeronautica et Astronautica Sinica,2010,31(12):2324-2331(in Chinese)
[17]
张红英,孙姝, 程克明,等.进气道工作状态对吸气式高超飞行器气动力特性影响的实验研究[J].宇航学报,2007,28(4):624-628 Zhang Hongying,Sun Shu,Cheng Keming,et al.Experimental investigation of inlet start/unstart influences on the aerodynamic characteristic of a hypersonic vehicle[J].Journal of Astronautics,2007,28(4):624-628(in Chinese)
[18]
罗金玲,徐敏,刘杰. 一体化外形的高超声速飞行器升阻特性研究[J].宇航学报,2007,28(6):1478-1481 Luo Jinling,Xu Min,Liu Jie.Research on lift and drag characteristics for the integrated configuration of hypersonic vehicle[J].Journal of Astronautics,2007,28(6):1478-1481(in Chinese)
