于靖军,毕树生,宗光华.空间全柔性机构位置分析的刚度矩阵法[J].北京航空航天大学学报,2002,28(3):323-326 Yu Jingjun,Bi Shusheng,Zong Guanghua.Stiffness matrix method for displacement analysis of fully spatial compliant mechanisms [J].Journal of Beijing University of Aeronautics and Astronautics,2002,28(3):323-326 (in Chinese)
[2]
Patitsas S N.Stability analysis for axially-symmetric magnetic field levitation of a superconducting sphere [J].Physica C:Superconductivity and Its Applications,2011,471(1):12-18
[3]
南和礼.超导磁体设计基础[M].北京:国防工业出版社,2007 Nan Heli.Foundation of superconducting magnet design [M].Beijing:National Defense Industry Press,2007 (in Chinese)
[4]
Chan H A,Paik H J.Superconducting gravity gradiometer for sensitive gravity measurement.I.theory [J].Physical Review D:Particles and Fields,1987,35(12):3551-3571
[5]
Rogers M M,Huffman R E,Shearer C M.An investigation into the feasibility of using a modern gravity gradiometer instrument for passive aircraft navigation and terrain avoidance // Proceedings of the Institute of Navigation,National Technical Meeting.Anaheim,CA,United States:Institute of Navigation,2009:49-60
[6]
Moody M V,Paik H J.A superconducting gravity gradiometer for inertial navigation // Record-IEEE PLANS,Position Location and Navigation Symposium.Monterey,CA,United States:Institute of Electrical and Electronics Engineers Inc,2004:775-781
[7]
Moody M V,Paik H J,Canavan E R.Three-axis superconducting gravity gradiometer for sensitive gravity experiments [J].Review of Scientific Instruments,2002,73(11):3957-3974
[8]
贾明,杨功流.基于超导的三位置重力梯度轴向分量测量方法[J].中国惯性技术学报,2011,19(4):419-422 Jia Ming,Yang Gongliu.Measurement of inline-component of gravity gradient by three-position method based on superconductor [J].Journal of Chinese Inertial Technology,2011,19(4):419-422 (in Chinese)
[9]
Blanding D L.Exact constraint:machine design using kinematic principle [M].New York:ASME Press,1999
[10]
于靖军,裴旭,毕树生,等.柔性铰链机构设计方法的研究进展[J].机械工程学报,2010,46(13):2-13 Yu Jingjun,Pei Xu,Bi Shusheng,et al.State-of-arts of design method for flexure mechanisms [J].Journal of Mechanical Engineering,2010,46(13):2-13 (in Chinese)
