杨颂,李涛.大跨径连续刚构桥箱梁悬臂施工阶段剪 滞效应分析［J］.公路交通技术,2012(4):82- 84. YANG Song,LI Tao.Analysis for Shear Lag Effect during Construction of Box Girder Cantilevers of Large-span Continuous Rigid Frame Bridges ［J］.Technology of Highway and Transport,2012(4):82-84.
[2]
沈旭东,郑永卫,肖汝诚.预应力混凝土箱梁施工阶 段破坏机理及对策分析［J］.公路,2012(1):94- 102. SHEN Xudong,ZHENG Yongwei,XIAO Rucheng. Failure Mechanism of Prestressed Concrete Box Girder in Construction Phase and Countermeasure Analysis ［J］. Highway,2012(1):94-102.
[3]
赵向阳.浅谈现浇箱梁后张法预应力张拉施工控制要 点［J］.中国西部科技,2011,10(34):21-23. ZHAO Xiangyang.Discussion on Prestressed Tension Construction Control Key Points of Post Tensioning Method of Cast-in-place Box Girder ［J］.Science and Technology of West China,2011,10(34):21-23.
[4]
刘立新,王新宇.折线先张预应力混凝土箱梁钢绞线 锚固区应力研究［J］.郑州大学学报:工学版, 2010,31(5):74-77.LIU Lixin,WANG Xinyu.Study on Local Stress of Strand Anchorage Zone for Prestressed Concrete Box Beams with Pre-tensioned Bent-up Tendons
[5]
[ J ].Journal of Zhengzhou University:Engineering Science Edition, 2010,31(5):74-77.
[6]
周先雁,王智丰,晏班夫.预应力管道压浆质量无损 检测方法［J］.中国公路学报,2011,24(6):64-71. ZHOU Xianyan,WANG Zhifeng,YAN Banfu. Nondestructive Testing Method of Grouting Quality for Prestressed Pipe ［J］.China Journal of Highway and Transport,2011,24(6):64-71.
[7]
辛公锋,王兆星,刘家海,等.箱梁预应力孔道压浆 密实性检测技术研究［J］.公路交通科技,2010,27 (S1):114-117,121. XIN Gongfeng,WANG Zhaoxing,LIU Jiahai,et al. Research on Grouting Density Inspection of Box Girder Prestressed Duct
[8]
[ J ].Journal of Highway and Transportation Research and Development,2010,27 (S1):114-117,121.
[9]
沈建中,李宗津,张之勇.土木工程中的无损检测技 术及其应用［J］.无损检测,2000,22(11):497- 500. SHEN Jianzhong,LI Zongjin,ZHANG Zhiyong. Nondestructive Testing Technologies and Their Applications in Civil Engineering ［J］.Nondestructive Testing,2000,22(11):497-500.
[10]
郑亚明.后张PC 桥梁孔道灌浆空洞无损检测及波纹 管锈胀机理的研究［D］.南京:东南大学,2006. ZHENG Yaming.Research on Corroded Expansion Mechanism of Corrugated Pipe and Nondestructive Testing of Duct Grouting Voids in Post-tensioned Prestressed Concrete Bridge ［D］.Nanjing:Southeast University, 2006.
[11]
中国机械工程学会无损检测分会.射线检测［M］.3 版.北京:机械工业出版社,2004. Non-destructive Testing Branch of Chinese Mechanical Engineering Society.Ray Detection ［M］.3rd ed. Beijing:China Machine Press,2004.
[12]
熊瑛,张孝玲,董德秀.射线测量涡轮叶片大曲率处 壁厚尺寸的方法［J］.无损检测,2010,32(6): 424-426. XIONG Ying,ZHANG Xiaoling,DONG Dexiu.Wall Thickness Measurement Method for Maximum Curvature of Aero-Engine Turbine Blade Based on X-ray
[13]
[J ]. Nondestructive Testing,2010,32(6):424-426.
[14]
江河兰,褚瑞峰.超声法检测预应力混凝土预留孔道 灌浆质量的研究［J］.森林工程,2003,19(1): 44-45. JIANG Helan,ZHU Ruifeng.Application of Supersonic Detection to Irrigation Quality of Prestressed Concrete ［J］.Forest Engineering,2003,19(1):44-45.
[15]
吴新璇.混凝土无损检测技术手册［M］.北京:人 民交通出版社,2003. WU Xinxuan.Handbook of Nondestructive Testing on Concrete ［M］.Beijing:China Communications Press, 2003.
